Difference between revisions of "APS Lighting Equipment Guide"

From Help Wiki
(Created page with "===Arrilite 1000 Three Light Kit=== The Arri 1000 Watt Focusing Flood Light is designed for a wide range of film and photographic lighting applications. The 1000 provides bea...")
 
(→‎LOWEL CASELITES)
 
(147 intermediate revisions by 5 users not shown)
Line 1: Line 1:
−
===Arrilite 1000 Three Light Kit===
+
{{#ev:vimeo|187691086|600|center|Basic Lighting Concepts}}
  
−
The Arri 1000 Watt Focusing Flood Light is designed for a wide range of film and photographic lighting applications. The 1000 provides beam angles of 65° in the flood position and 24° in the spot position.
+
==SAFETY==
 +
Please exercise caution with all lighting equipment checked out from Media Loan. The lights can get extremely hot and most require a lot of power.  
  
−
Each fixture will throw a beam of 695 footcandles 4.3 ft (1.4 m) in diameter, @ full spot, from a distance of 10 ft (3 m). It will provide a beam of 145 footcandles 13 ft (4m) in diameter @ full flood, from the same distance.
+
====When using lighting equipment from Media Loan, ALWAYS:====
 +
* Use gloves to protect your hands
 +
* Tape down wires/cords to prevent tripping hazards
 +
* Weigh down heavy stands with sandbags
 +
* Plug lights into grounded outlets
 +
* Use gloves/hand protection when changing lamps (bulbs)
 +
* Wait for hot lights to cool down before packing them away (at least ten minutes)
  
−
This is a three light, 3000 watt, 120 volt kit, including barndoor sets, bulbs, scrims, light stands and a wheeled case. Thermoplastic housing keeps relatively cool
+
====DO NOT:====
 +
Touch hot lights without proper hand protection<br />
 +
Touch lamps (bulbs) with your bare hands (excluding fluorescent and LED)<br />
 +
Expose lights to water<br />
 +
Expose lights to extreme weather/temperatures<br />
 +
Set a hot light on top of a gel<br />
  
−
===Arrilite 650 Three Light Kit===
+
====Lamp (bulb) Changing====
 +
It is extremely important that you never touch halogen lamps with your bare hands.  Your hands are covered in oils that, if they get on a lamp, will heat up and potentially cause explosions. To prevent this, you must cover your hands with proper gloves (available in APS) or a clean cloth.  Leather, or any type of "working" gloves, will suffice. Do not use latex.<br />
 +
The only type of bulbs you can safely touch with your bare hands are fluorescent and LED. <br />
 +
Every kit should come with spare replacement lamps in the case.  If you need help changing a lamp, please call APS (x5506) or stop by during open APS hours.
  
−
The Arrilite 650 is an open face, focusing tungsten floodlight ideal for field production and fast turnaround location use. The reflector gives a balance between controllability, efficiency and provides an exceptionally even field of illumination.It includes barndoor sets, bulbs, light stands, scrims and a case.
+
====Know Your Circuits====
 +
These lights require a lot of power. Each house is divided into multiple circuits, as controlled by a circuit board, and each circuit has a capacity. Overloading a circuit will cause a blow-out and potential damage. Use the formula below to calculate the wattage a circuit is capable of supporting, without accidents:
  
−
The Arrlite 650 will throw a beam of 450 footcandles 4.3 ft in diameter @ full spot, from a distance of 10 ft. It will provide a beam of 100 footcandles, 14 ft diameter @ full flood, from the same distance. A 7.25" open face provides beam angles of 70° in the flood position, and 26° in the spot position.
+
'''AMPS x VOLTS = WATTS'''
  
−
===Arri Soft Key Tungsten 3 Light Kit===
+
Common household plugs are typically 15-20 amps circuits.  Household voltage capacity is 110-120V, so for the purpose of this equation it's a good idea to round down to an even 100V to prevent any blow-outs. In an average house, each circuit is capable of supporting approximately 1500 Watts (15 x 100 = 1500).  This is a conservative estimate and will be different per location.
  
−
The small size and light weight of the Arrisoft 1000 make it an excellent solution for that soft-fill or a main light, especially in situations where bulky soft boxes would not be the fixture of choice. The Arrisoft has a narrow profile of only 5.5" deep, and interchangeable reflectors that allow the user to change the "mood" of the light.
+
==LIGHTING EQUIPMENT IN APS==
 +
There are multiple options for lighting equipment in APS.  These kits do not require proficiencies, but as with all other APS checkouts, they do require an APS workorder. APS equipment is typically restricted to students in media-centric classes/programs and ILC's/SOS's. Before requesting equipment from APS, please familiarize yourself with APS policies and procedures [http://www.evergreen.edu/medialoan/aps.htm here].
  
−
This kit includes two 650W Fresnel lights, a focusable spotlight used in film and television which can be adjusted via a knob on the back of the light from "spot" for a narrowly focused beam, to "flood" for a wider beam. The beam angle in the flood position is 52 degrees, and a narrow 14.5 degrees in the spot position. The Arri 650 has a 4.3" low expansion, borosillicate fresnel lens which casts a soft, even illumination across the beam.
+
===ARRILITE 3-LIGHT KITS===
 +
[[file:arri1.jpg|thumb|200px|right|Arri 1000W/650W]]
 +
[[file:arri_open.jpg|200px|thumb|left|Arri 1000W/650W Open-Face]]
  
−
===Lowel Caselites===
+
Number of lights: 3 per kit<br />
 +
Light intensity: 650W or 1000W<br />
 +
Accessories: Barndoors, Stands, Scrims<br />
  
−
Lowel Caselites are designed to offer beautiful, soft, easy to use fluorescents in a compact, location friendly system. The current popularity of fluorescent lights in film & video production is well deserved. They offer cool, soft and efficient light at several times the output of incandescent halogen sources.
+
The Arri 3-Light Kits come with three open-face focusing flood lights of the same wattage (1000W '''or''' 650W). They are designed for a wide range of film and photographic lighting applications. Each kit comes with three barndoors, 3 stands, and scrims.
  
−
Caselites are compact, lightweight, rugged and completely self-contained without sacrificing output or light quality. The all-in-one Caselite is both light and case combined. APS carries both 5300K (daylight) and 3000K (tungsten) compact flourescent lamps.
+
The 1000W 3-Light kit provides beam angles of 65° in the flood position and 24° in the spot position. Each fixture will throw a beam of 695 footcandles 4.3 ft (1.4 m) in diameter, @ full spot, from a distance of 10 ft (3 m). It will provide a beam of 145 footcandles 13 ft (4m) in diameter @ full flood, from the same distance.
  
−
===Mickey Moles===
+
The Arrlite 650 has a 7.25" open face and provides beam angles of 70° in the flood position, and 26° in the spot position. Each fixture will throw a beam of 450 footcandles 4.3 ft in diameter @ full spot, from a distance of 10 ft. It will provide a beam of 100 footcandles, 14 ft diameter @ full flood, from the same distance.
  
−
Each kit contains four 1,000 watt tungsten balanced quartz instruments. The instruments allow for spot to flood adjustments. Also available with the Mickey Moles are stands and accessory kits which include barn doors, scrims, dichroic conversion filters (which will balance tungsten light color to approximate daylight), and filter holders. This kit should meet most of your heavy duty lighting needs.
 
  
−
This is the next step down from the Mickey Moles. A kit contains four 650 watt tungsten balanced instruments. An accessory kit is available with scrims, gel holders and bar doors. A separate stand kit is also needed to fully utilize these lights.
+
===ARRI SOFTKEY KIT===
 +
[[file:arri_soft.jpg|200px|left|thumb|Arri Softkey]]
  
−
===Teenie Moles===
+
Number of lights: 3<br />
 +
Light intensity: 2x650W (Fresnel), 1000W (Softbox)<br />
 +
Accessories: Barndoors, Stands, Scrims, Fresnel Lenses<br />
  
−
Teenie-Weenie Moles This is half a step down from the Teenie Moles. Designed especially for the traveling camera person. A kit contains three 600 watt tungsten balanced lights along with three lightweight stands.
+
This kit includes two 650W Fresnel lights and one 1000W Softbox. The 650W Fresnel lights have a focusable spotlight which can be adjusted via a knob on the back of the light ("spot" for a narrowly focused beam, or "flood" for a wide beam). The beam angle in the flood position is 52 degrees, and a narrow 14.5 degrees in the spot position. The 650W in this kit has a 4.3" low expansion, borosillicate fresnel lens which casts a soft, even illumination across the beam.
  
−
===Teenie Weenie Moles===
+
The small size and light weight of the 1000W Softbox make it an excellent solution for a soft fill or key.  The Softbox has a narrow profile of only 5.5" deep, in which the light bounces off a reflector in the back of the instrument for indirect, even, soft light.
 +
<br />
 +
<br />
 +
<br />.
  
−
===Mini Moles===
+
===LOWEL CASELITES===
−
Kit contains four 200 watt tungsten balance instruments. The lights are small, have a fresnel lens, and come with snoots and aperture plates for better control of light. The inclusion of small desk stands make this kit perfect for 3D animation projects. The instruments can also be mounted on C-Stands for use in animation or as a small kick light hidden in a set.
+
[[file:caselite.jpg|200px|right|thumb|Lowel Caselite]]
 +
Number of lights: 1<br />
 +
Light intensity: 55W/bulb, 110W total<br />
 +
Accessories: Barndoors, Stand, Cord, Eggcrate, Stand Arm, Stand Mount<br />
  
−
===Molefays===
+
Lowel Caselites are designed to offer beautiful, soft, easy to use fluorescents in a compact, location-friendly system. The current popularity of fluorescent lights in film & video production is well deserved. They offer soft and efficient light at several times the output of incandescent halogen sources. These lights are ideal for interviews.
−
This is a good lighting instrument for outdoor use as a fill light when using the sun as a key light source. Each kit is slightly different, one has 2-2 light Molefays, another has 1-2 light Molefays and accessories, and the third has 2-1 light Molefays and accessories. Each dichroic filtered lamp is rated at 605 watts and approximates 5,600 K daylight. Each kit requires separate light stands.
+
  
−
===8-Tube Molescent===
+
Caselites are compact, lightweight, rugged and completely self-contained without sacrificing output or light quality. The all-in-one Caselite is both light and case combined, and each one comes with a stand, eggcraft, cord, arm, and stand mount bracket. APS carries both 5300K (daylight) and 3000K (tungsten) compact fluorescent lamps.  Additional lamps can be checked out separately.<br />
 +
<br />
  
−
===Color Tran 3-Light Kit===
+
===DRACAST LED===
  
−
===2K Baby Softlite===
+
<gallery>
 +
File:LED intensity.png|Dracast LED Light Intensity Chart
 +
File:Dracast_LED.jpg|Dracast LED
 +
</gallery>
  
−
===Molequartz Double Broad===
+
Number of Lights: 1<br />
 +
Light Intensity: (see chart)<br />
 +
Accessories available: barndoor, light cover, stand, diffusion kit.<br />
  
−
[[Category:Media Loan]]
+
The Dracast LED is an ideal choice for location work, interviews and small sets where color accuracy, control and flicker-free output are of major importance. Variable color temperature from 3,200K-5,600K means that you can quickly match the prevailing ambient or artificial light balance with a simple twist of a knob. Dimming is equally convenient via another knob that adjusts the light intensity from 100-0% with negligible color shift. This light has a low electricity draw of 60W.
 +
 
 +
===LIGHTING ACCESSORIES (APS)===
 +
Lighting accessories in APS include:
 +
* Light Stands (single & baby stand kits)
 +
* Gels: Color and diffusion kits
 +
* Bounce Discs
 +
* Clothes Pins (C-47's): Used to attach gels to lights
 +
 
 +
====Bounce Discs====
 +
[[file:Bounce.jpg|200px|thumb|right|5-in-one 42 " Bounce Disk]]
 +
The 42" 5-in-1 Collapsible Reflector Disc from Raya is a versatile light modification tool than can find uses in the studio and on location. This disc provides white, silver, gold, and black surfaces as well as a one stop translucent diffusion panel. The tool allows you to quickly and easily make adjustments to your lighting in order to get the look you want. Also, the disc is able to fold down to 1/3 its size and be stored inside the included carrying bag.
 +
 
 +
* White provides a neutral soft reflection useful for fill light
 +
* Silver offers a neutral color balance similar to the white but with a higher contrast, increasing specular highlights
 +
* Gold reflects a warmer light onto a subject, useful to enhancing skin tones or balancing a cool scene
 +
* Black will block unwanted reflections and eliminate spill
 +
* The translucent diffuser lessens light power by 1 stop and will help create a broader, softer light source that will wrap around your subject
 +
 
 +
===GRIP===
 +
====C-Stands and Gobo arms====
 +
[[file:Cstand.jpg|200px|thumb|right|C-Stand with Gobo Arm]]
 +
A C-stand is primarily used to position light modifiers, such as silks, nets, or flags, in front of light sources. The stand is constructed of metal and consists of a collapsible base, two riser columns, and a baby pin on top. In addition, a C-stand includes a gobo head and a gobo arm, which provide the ability to articulate a light modifier without moving the stand itself. The legs of C stands are designed to be nested, so many stands can be placed around a light source.
 +
 
 +
====Flags====
 +
Flags are used for controlling a lighting instrument. Flags are mounted onto C-Stands and placed in front of lights.
 +
 
 +
Single flags available for checkout at APS include:
 +
* Cutter (Black flag): This completely blocks lighting. Used for intentionally shaping light.
 +
* Single Scrim (Green): Reduces the amount of light produced from an instrument by half of a stop.
 +
* Double Scrim (Red): Reduces the amount of by one full stop.
 +
* Silk (Yellow): Diffuses and greatly reduces the amount of light.
 +
* Wooden Cucoloris (Cookie): Creates patterns by cutting shapes into it. Used to create background foliage, etc.
 +
* Cello Cucoloris (Cookie): Diffuses light and creates shapes. More subtle effects than the wooden cookie.
 +
 
 +
====Flag Kits (Lighting Control Kits)====
 +
There are also flag kits available at APS.  These come with a cutter, single scrim, double scrim, and silk in a transportable bag.
 +
 
 +
====Additional Grip Gear====
 +
* Apple Boxes: Used for propping various objects and subjects
 +
* Gloves: Wear when handling hot lighting equipment, or changing bulbs
 +
* Clamps: Used for various reasons, such as to attach gear to C-Stands
 +
 
 +
[[category:APS Gear Guides]]

Latest revision as of 15:54, 6 April 2022

Basic Lighting Concepts

SAFETY

Please exercise caution with all lighting equipment checked out from Media Loan. The lights can get extremely hot and most require a lot of power.

When using lighting equipment from Media Loan, ALWAYS:

  • Use gloves to protect your hands
  • Tape down wires/cords to prevent tripping hazards
  • Weigh down heavy stands with sandbags
  • Plug lights into grounded outlets
  • Use gloves/hand protection when changing lamps (bulbs)
  • Wait for hot lights to cool down before packing them away (at least ten minutes)

DO NOT:

Touch hot lights without proper hand protection
Touch lamps (bulbs) with your bare hands (excluding fluorescent and LED)
Expose lights to water
Expose lights to extreme weather/temperatures
Set a hot light on top of a gel

Lamp (bulb) Changing

It is extremely important that you never touch halogen lamps with your bare hands. Your hands are covered in oils that, if they get on a lamp, will heat up and potentially cause explosions. To prevent this, you must cover your hands with proper gloves (available in APS) or a clean cloth. Leather, or any type of "working" gloves, will suffice. Do not use latex.
The only type of bulbs you can safely touch with your bare hands are fluorescent and LED.
Every kit should come with spare replacement lamps in the case. If you need help changing a lamp, please call APS (x5506) or stop by during open APS hours.

Know Your Circuits

These lights require a lot of power. Each house is divided into multiple circuits, as controlled by a circuit board, and each circuit has a capacity. Overloading a circuit will cause a blow-out and potential damage. Use the formula below to calculate the wattage a circuit is capable of supporting, without accidents:

AMPS x VOLTS = WATTS

Common household plugs are typically 15-20 amps circuits. Household voltage capacity is 110-120V, so for the purpose of this equation it's a good idea to round down to an even 100V to prevent any blow-outs. In an average house, each circuit is capable of supporting approximately 1500 Watts (15 x 100 = 1500). This is a conservative estimate and will be different per location.

LIGHTING EQUIPMENT IN APS

There are multiple options for lighting equipment in APS. These kits do not require proficiencies, but as with all other APS checkouts, they do require an APS workorder. APS equipment is typically restricted to students in media-centric classes/programs and ILC's/SOS's. Before requesting equipment from APS, please familiarize yourself with APS policies and procedures here.

ARRILITE 3-LIGHT KITS

Arri 1000W/650W
Arri 1000W/650W Open-Face

Number of lights: 3 per kit
Light intensity: 650W or 1000W
Accessories: Barndoors, Stands, Scrims

The Arri 3-Light Kits come with three open-face focusing flood lights of the same wattage (1000W or 650W). They are designed for a wide range of film and photographic lighting applications. Each kit comes with three barndoors, 3 stands, and scrims.

The 1000W 3-Light kit provides beam angles of 65° in the flood position and 24° in the spot position. Each fixture will throw a beam of 695 footcandles 4.3 ft (1.4 m) in diameter, @ full spot, from a distance of 10 ft (3 m). It will provide a beam of 145 footcandles 13 ft (4m) in diameter @ full flood, from the same distance.

The Arrlite 650 has a 7.25" open face and provides beam angles of 70° in the flood position, and 26° in the spot position. Each fixture will throw a beam of 450 footcandles 4.3 ft in diameter @ full spot, from a distance of 10 ft. It will provide a beam of 100 footcandles, 14 ft diameter @ full flood, from the same distance.


ARRI SOFTKEY KIT

Arri Softkey

Number of lights: 3
Light intensity: 2x650W (Fresnel), 1000W (Softbox)
Accessories: Barndoors, Stands, Scrims, Fresnel Lenses

This kit includes two 650W Fresnel lights and one 1000W Softbox. The 650W Fresnel lights have a focusable spotlight which can be adjusted via a knob on the back of the light ("spot" for a narrowly focused beam, or "flood" for a wide beam). The beam angle in the flood position is 52 degrees, and a narrow 14.5 degrees in the spot position. The 650W in this kit has a 4.3" low expansion, borosillicate fresnel lens which casts a soft, even illumination across the beam.

The small size and light weight of the 1000W Softbox make it an excellent solution for a soft fill or key. The Softbox has a narrow profile of only 5.5" deep, in which the light bounces off a reflector in the back of the instrument for indirect, even, soft light.


.

LOWEL CASELITES

Lowel Caselite

Number of lights: 1
Light intensity: 55W/bulb, 110W total
Accessories: Barndoors, Stand, Cord, Eggcrate, Stand Arm, Stand Mount

Lowel Caselites are designed to offer beautiful, soft, easy to use fluorescents in a compact, location-friendly system. The current popularity of fluorescent lights in film & video production is well deserved. They offer soft and efficient light at several times the output of incandescent halogen sources. These lights are ideal for interviews.

Caselites are compact, lightweight, rugged and completely self-contained without sacrificing output or light quality. The all-in-one Caselite is both light and case combined, and each one comes with a stand, eggcraft, cord, arm, and stand mount bracket. APS carries both 5300K (daylight) and 3000K (tungsten) compact fluorescent lamps. Additional lamps can be checked out separately.

DRACAST LED

  • Dracast LED Light Intensity Chart

  • Dracast LED

Number of Lights: 1
Light Intensity: (see chart)
Accessories available: barndoor, light cover, stand, diffusion kit.

The Dracast LED is an ideal choice for location work, interviews and small sets where color accuracy, control and flicker-free output are of major importance. Variable color temperature from 3,200K-5,600K means that you can quickly match the prevailing ambient or artificial light balance with a simple twist of a knob. Dimming is equally convenient via another knob that adjusts the light intensity from 100-0% with negligible color shift. This light has a low electricity draw of 60W.

LIGHTING ACCESSORIES (APS)

Lighting accessories in APS include:

  • Light Stands (single & baby stand kits)
  • Gels: Color and diffusion kits
  • Bounce Discs
  • Clothes Pins (C-47's): Used to attach gels to lights

Bounce Discs

5-in-one 42 " Bounce Disk

The 42" 5-in-1 Collapsible Reflector Disc from Raya is a versatile light modification tool than can find uses in the studio and on location. This disc provides white, silver, gold, and black surfaces as well as a one stop translucent diffusion panel. The tool allows you to quickly and easily make adjustments to your lighting in order to get the look you want. Also, the disc is able to fold down to 1/3 its size and be stored inside the included carrying bag.

  • White provides a neutral soft reflection useful for fill light
  • Silver offers a neutral color balance similar to the white but with a higher contrast, increasing specular highlights
  • Gold reflects a warmer light onto a subject, useful to enhancing skin tones or balancing a cool scene
  • Black will block unwanted reflections and eliminate spill
  • The translucent diffuser lessens light power by 1 stop and will help create a broader, softer light source that will wrap around your subject

GRIP

C-Stands and Gobo arms

C-Stand with Gobo Arm

A C-stand is primarily used to position light modifiers, such as silks, nets, or flags, in front of light sources. The stand is constructed of metal and consists of a collapsible base, two riser columns, and a baby pin on top. In addition, a C-stand includes a gobo head and a gobo arm, which provide the ability to articulate a light modifier without moving the stand itself. The legs of C stands are designed to be nested, so many stands can be placed around a light source.

Flags

Flags are used for controlling a lighting instrument. Flags are mounted onto C-Stands and placed in front of lights.

Single flags available for checkout at APS include:

  • Cutter (Black flag): This completely blocks lighting. Used for intentionally shaping light.
  • Single Scrim (Green): Reduces the amount of light produced from an instrument by half of a stop.
  • Double Scrim (Red): Reduces the amount of by one full stop.
  • Silk (Yellow): Diffuses and greatly reduces the amount of light.
  • Wooden Cucoloris (Cookie): Creates patterns by cutting shapes into it. Used to create background foliage, etc.
  • Cello Cucoloris (Cookie): Diffuses light and creates shapes. More subtle effects than the wooden cookie.

Flag Kits (Lighting Control Kits)

There are also flag kits available at APS. These come with a cutter, single scrim, double scrim, and silk in a transportable bag.

Additional Grip Gear

  • Apple Boxes: Used for propping various objects and subjects
  • Gloves: Wear when handling hot lighting equipment, or changing bulbs
  • Clamps: Used for various reasons, such as to attach gear to C-Stands
Retrieved from "http://helpwiki.evergreen.edu/wiki/index.php?title=APS_Lighting_Equipment_Guide&oldid=43463"

The Evergreen State College