Duplex Printing

From Help Wiki
Revision as of 12:17, 13 September 2007 by Greenea (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Printing on both sides of the page

To enable double sided printing (or check if it is enabled) you need to check some options under print.

On a PC

  1. Go to the File menu
  2. Select Print
  3. From the dialogue box that shows up, select Properties
  4. Select the Finishing tab from the group of tabs at the top of the dialogue box
  5. To enable double sided (duplex) printing, make sure the box for "print on both sides" is checked.
  6. Click ok
  7. If you are ready to print, click ok again, otherwise click cancel

On a Mac

  1. Go to the File menu
  2. Select Print
  3. From the bottom drop down menu, select Layout
  4. Select if you wish to print long edged double-sided (like a book), short edge, or not at all (off)