Difference between revisions of "Library 1412"

From Help Wiki
Line 2: Line 2:
 
[[File:LIBPANEL.pdf]]
 
[[File:LIBPANEL.pdf]]
  
−
===Laptop:===
+
'''Contact:''' AV classroom support ext. 6270
−
# Press the projector ON button to turn data projector on. (Projector takes 30 seconds to fully warm up) Projector button stops blinking when fully turned on.
+
−
# Select “laptop” button on media control panel.
+
−
# After selecting your “laptop” button, press the “Mac Mini” button so the monitor login shows up on the screen
+
−
# Locate VGA cable and connect VGA cable to your laptop’s VGA input (audio cable attached to VGA cable). Insert audio cable into laptop headphone jack for audio.
+
−
# Locate HDMI cable and connect HDMI cable to your laptop. HDMI cable carries audio, so once connected you will have picture and audio via the HDMI cable.
+
−
# Use volume knob to adjust audio level for room audio. Laptop also has volume control.
+
−
# Turn on your laptop now.
+
  
−
===To Play DVD From Laptop:===
+
===Volume Control===
−
# Same as above
+
# Volume is controlled from the media control panel volume knob.
−
# Same as above
+
# When turning the volume up, the lights should scroll up
−
# Insert DVD into laptop’s DVD drive
+
# When turning the volume down, the lights should scroll down
−
# DVD icon will show on screen
+
# If no sound is heard, check that the volume is not turned down or muted on the computer or other playback source.
 +
 
 +
===Podium Computer (Mac Mini)===
 +
# Press the projector ON button to turn data projector on. (Projector will take a little while to fully warm up.)
 +
# Select ‘Mac’ button on media control panel.
 +
# Pull out keyboard and move mouse to wake up system.
 +
# Login using TESC login.
 +
 
 +
===Laptop:===
 +
# Press the projector ON button to turn data projector on. (Projector will take a little while to fully warm up.)
 +
# Press '''HDMI''' or '''VGA''' button on media control panel, depending on what plug your laptop uses.
 +
# For VGA: locate VGA cable and connect VGA cable to your laptop’s VGA input (audio cable attached to VGA cable). Insert audio cable into laptop headphone jack for audio.
 +
# For HDMI: locate HDMI cable and connect HDMI cable to your laptop. HDMI cable carries audio, so once connected you will have picture and audio via the HDMI cable.
  
 
===To Play DVD From Media Cabinet:===
 
===To Play DVD From Media Cabinet:===
−
# Same as above
+
# Press the projector ON button to turn data projector on. (Projector will take a little while to fully warm up.)
−
# Press “DVD” button on podium
+
# Press “DVD” button on podium.
−
# Put your disc in the player
+
# Put your disc in the player.
−
# Use either the podium control buttons or the remote control (in the equipment rack drawer) to navigate
+
# Use either the podium control buttons or the remote control (in the equipment rack drawer) to navigate.
  
 
===To Play VHS From Media Cabinet:===
 
===To Play VHS From Media Cabinet:===
−
# Same as above
+
# Press the projector ON button to turn data projector on. (Projector will take a little while to fully warm up.)
 
# Press “VCR” (vhs) button on podium
 
# Press “VCR” (vhs) button on podium
  
 
===Document Camera:===
 
===Document Camera:===
−
# Same as above
+
# Press the projector ON button to turn data projector on. (Projector will take a little while to fully warm up.)
 
# Press “Doc Cam” button on podium
 
# Press “Doc Cam” button on podium
 
# Press the “On/Off” button on document camera
 
# Press the “On/Off” button on document camera
−
# Place document on the white surface
+
# Place document on the white surface and adjust as necessary
 
# Document camera controls are on front of document camera itself
 
# Document camera controls are on front of document camera itself
  
 +
===Shutdown Procedures===
 +
# Press '''Projector Off''' button on the media control panel
 +
# LOCK Media Cabinet if it was opened.
 +
 +
 +
===Media Cabinet===
 +
Access to the Media Cabinet requires an A/V key.
 +
A key can be assigned from Key Issues or short-term checkout from Media Loan.
 +
 +
===Assistive Listening===
 +
Unfortunately, this room does not have assisted listening integration.
 +
A self-containted system will need to be used.
  
 +
===Troubleshooting:===
 +
Is the computer volume turned up?
 +
Is the main power turned on.
 +
Yamaha Receiver turned on? (located in Media Cabinet)
 +
Is the Yamaha receiver main volume turned up?
  
  
 
'''Need Help??'''  
 
'''Need Help??'''  
  
−
'''Call Media Patron Services at x6270'''
+
'''Please kindly call x6270'''
  
 
[[Category:Media Classrooms]]
 
[[Category:Media Classrooms]]

Revision as of 14:56, 23 October 2018

LIBPANEL.pdf

Contact: AV classroom support ext. 6270

Volume Control

  1. Volume is controlled from the media control panel volume knob.
  2. When turning the volume up, the lights should scroll up
  3. When turning the volume down, the lights should scroll down
  4. If no sound is heard, check that the volume is not turned down or muted on the computer or other playback source.

Podium Computer (Mac Mini)

  1. Press the projector ON button to turn data projector on. (Projector will take a little while to fully warm up.)
  2. Select ‘Mac’ button on media control panel.
  3. Pull out keyboard and move mouse to wake up system.
  4. Login using TESC login.

Laptop:

  1. Press the projector ON button to turn data projector on. (Projector will take a little while to fully warm up.)
  2. Press HDMI or VGA button on media control panel, depending on what plug your laptop uses.
  3. For VGA: locate VGA cable and connect VGA cable to your laptop’s VGA input (audio cable attached to VGA cable). Insert audio cable into laptop headphone jack for audio.
  4. For HDMI: locate HDMI cable and connect HDMI cable to your laptop. HDMI cable carries audio, so once connected you will have picture and audio via the HDMI cable.

To Play DVD From Media Cabinet:

  1. Press the projector ON button to turn data projector on. (Projector will take a little while to fully warm up.)
  2. Press “DVD” button on podium.
  3. Put your disc in the player.
  4. Use either the podium control buttons or the remote control (in the equipment rack drawer) to navigate.

To Play VHS From Media Cabinet:

  1. Press the projector ON button to turn data projector on. (Projector will take a little while to fully warm up.)
  2. Press “VCR” (vhs) button on podium

Document Camera:

  1. Press the projector ON button to turn data projector on. (Projector will take a little while to fully warm up.)
  2. Press “Doc Cam” button on podium
  3. Press the “On/Off” button on document camera
  4. Place document on the white surface and adjust as necessary
  5. Document camera controls are on front of document camera itself

Shutdown Procedures

  1. Press Projector Off button on the media control panel
  2. LOCK Media Cabinet if it was opened.


Media Cabinet

Access to the Media Cabinet requires an A/V key. A key can be assigned from Key Issues or short-term checkout from Media Loan.

Assistive Listening

Unfortunately, this room does not have assisted listening integration. A self-containted system will need to be used.

Troubleshooting:

Is the computer volume turned up?
Is the main power turned on.
Yamaha Receiver turned on? (located in Media Cabinet)
Is the Yamaha receiver main volume turned up?


Need Help??

Please kindly call x6270

Retrieved from "http://helpwiki.evergreen.edu/wiki/index.php?title=Library_1412&oldid=37512"

The Evergreen State College