Difference between revisions of "Library 1540"

From Help Wiki
Line 1: Line 1:
 
[[File:LIBPANEL.pdf]]
 
[[File:LIBPANEL.pdf]]
 
__NOTOC__
 
__NOTOC__
−
===Laptop:===
 
−
# From media control panel left, select your source (VCR, DVD, Doc Cam, PC (podium computer), etc). A solid light will indicate which source is active. You may need to hold the button for 2 seconds.
 
−
# From the media control panel right, use the Laptop/Mac Mini switch to select whether you are using a laptop or the Mac Mini.
 
−
# Securely connect the VGA cable on the podium to your computer, if you need audio connect the mini audio jack into the headphone jack, If you are using a Mac, you will need an adaptor to connect from your laptop to the VGA (available at Media Loan).
 
  
−
:For the best results, wait until all of the cables are securely connected before turning on your laptop.
+
#    To turn ON the projector, press the display "ON" button.
 +
The button will blink for 30 seconds while the projector warms up.
 +
#    On the Media Control Panel, press the button for your source. A solid light indicates which source is active.
 +
#    You may need to hold the button for 2 seconds.
  
−
===Mac Mini:===
+
===HDMI Laptop===
−
# From media control panel right, move the Laptop/Mac Mini switch to Mac Mini.
+
# Press the HDMI button on the Media Control Panel
−
# Pull out the keyboard and press any key or move the mouse to bring up TESC login on monitor.
+
# Plug in your laptop to the provided HDMI cable
−
# You can insert a flashdrive into the back of the Mac Mini and a CD/DVD into the front of the Mac Mini.
+
# Sound comes through the HDMI connector; when playing sound, adjust the volume knob on the Media Control Panel to a comfortable level.  
 +
: If you need an adapter to connect your laptop to the podium, one can be checked out at Media Loan.
  
−
On media control panel left there is volume control.
+
===VGA Laptop===
−
Important! – Make sure the audio switch on the media control panel right is switched to normal.
+
# Press the VGA button on the Media Control Panel
 +
# Plug in your laptop to the provided VGA cable
 +
# Sound comes through the mini plug (earphone) on the VGA cable. Connect it to your earphone jack & make sure the device volume is up. When playing sound, adjust the volume knob on the Media Control Panel to a comfortable level.
 +
: If you need an adapter to connect your laptop to the podium, one can be checked out at Media Loan.
  
−
===Document Camera:===
+
===Mac Mini===
−
# From media control panel left, select ‘Doc Cam’.
+
# Press the Mac Mini button on the Media Control Panel
−
# Locate the power switch on the document camera and turn it on.
+
# Log in using the keyboard and mouse (if the keyboard and mouse are not on the desktop, check the keyboard tray)
 +
# Sound level should be turned up on the mac, and the volume adjusted via the Media Control Panel volume knob. When playing sound, adjust the volume knob on the Media Control Panel to a comfortable level.  
 +
:Important: make sure the "Audio" switch on the right near the laptop wires in switched into "Normal" position (not "mixer")
  
−
===DVD/CD:===
+
===VHS===
−
# The DVD/CD player is located in the equipment rack. You will need a key to open the rack.
+
# The VHS player is in the equipment rack (which must be unlocked with a key)
−
# From media control panel left, select ‘DVD’.
+
# Press the VHS button on the Media Control Panel
−
# Turn on the DVD player in the media rack and put your DVD/CD in the player.
+
−
# On media control panel left, use the control buttons or use the remote control.
+
−
 
+
−
===VHS:===
+
−
# The VHS player is located in the equipment rack. You will need a key to open the rack.
+
−
# From media control panel left, select ‘VCR’.
+
 
# Turn on the VCR and put your VHS tape in the player.
 
# Turn on the VCR and put your VHS tape in the player.
−
# On media control panel left, use the control buttons or use the remote control.
+
# Use the Media control panel buttons to operate the VCR, or the buttons on the VCR itself. A remote is also in the rack drawer.
 +
# Closed Caption for the VCR is turned on and off by the "Close Caption" switch near the laptop wires.
 +
 +
===Blu-ray / DVD===
 +
# The Blu-ray player is in the podium below the keyboard tray
 +
# Press the BLU-RAY button on the Media Control Panel
 +
# Press the eject button on the Blu-ray player and put your disc in the player.
 +
# Use the Media control panel buttons to operate the Blu-ray, or the remote (keyboard tray or on top of the podium).
 +
# Closed Caption for the Blu-ray can be turned on/off from the "subtitles" button on the remote, or from the menu system of your video disc.
 +
 
 +
===Document Camera===
 +
# Press "Doc Cam" on the Media Control Panel
 +
# Locate the power button on the document camera and tap to turn it on (light turns blue).
 +
# Adjust the camera arm and head to show your document or demonstration the way you want it on the screen.
 +
# If you need light, there is a switch on the front of the camera head that sets the camera light to off/low/high light
 +
;Important: turning off the camera requires twice pressing the power button: the first asks for a confirmation, pressing again will turn it off.
 +
 
  
 
===Troubleshooting:===
 
===Troubleshooting:===
−
Is the Crown Amp turned on? (located on the top of rack)
+
Are the power lights lit up?
−
Make sure the main power to the Rane mixer is on.
+
Is the plug fully seated into the connector
−
Is the Rane master volume turned up?
+
Is the volume up
−
Is the Yamaha receiver turned on?
+
Is the light on the Media Control Panel lit solid for the source you are using?
−
Is the Yamaha receiver main volume turned up?
+
Does a different source work?
−
On the Rane mixer, make sure input #1 (PC), input #2 (DVD), and input #3 (VCR) are turned up.
+
Is the Yamaha receiver turned on (in the rack)?
  
  
 
'''Need Help??'''  
 
'''Need Help??'''  
 +
'''Want Training??'''
  
−
'''Call Media Patron Services at x6270'''
+
'''Call x6270 for Classroom Support'''
  
 
[[Category:Media Classrooms]]
 
[[Category:Media Classrooms]]

Revision as of 15:40, 12 July 2019

LIBPANEL.pdf


  1. To turn ON the projector, press the display "ON" button.
The button will blink for 30 seconds while the projector warms up.
  1. On the Media Control Panel, press the button for your source. A solid light indicates which source is active.
  2. You may need to hold the button for 2 seconds.

HDMI Laptop

  1. Press the HDMI button on the Media Control Panel
  2. Plug in your laptop to the provided HDMI cable
  3. Sound comes through the HDMI connector; when playing sound, adjust the volume knob on the Media Control Panel to a comfortable level.
If you need an adapter to connect your laptop to the podium, one can be checked out at Media Loan.

VGA Laptop

  1. Press the VGA button on the Media Control Panel
  2. Plug in your laptop to the provided VGA cable
  3. Sound comes through the mini plug (earphone) on the VGA cable. Connect it to your earphone jack & make sure the device volume is up. When playing sound, adjust the volume knob on the Media Control Panel to a comfortable level.
If you need an adapter to connect your laptop to the podium, one can be checked out at Media Loan.

Mac Mini

  1. Press the Mac Mini button on the Media Control Panel
  2. Log in using the keyboard and mouse (if the keyboard and mouse are not on the desktop, check the keyboard tray)
  3. Sound level should be turned up on the mac, and the volume adjusted via the Media Control Panel volume knob. When playing sound, adjust the volume knob on the Media Control Panel to a comfortable level.
Important: make sure the "Audio" switch on the right near the laptop wires in switched into "Normal" position (not "mixer")

VHS

  1. The VHS player is in the equipment rack (which must be unlocked with a key)
  2. Press the VHS button on the Media Control Panel
  3. Turn on the VCR and put your VHS tape in the player.
  4. Use the Media control panel buttons to operate the VCR, or the buttons on the VCR itself. A remote is also in the rack drawer.
  5. Closed Caption for the VCR is turned on and off by the "Close Caption" switch near the laptop wires.

Blu-ray / DVD

  1. The Blu-ray player is in the podium below the keyboard tray
  2. Press the BLU-RAY button on the Media Control Panel
  3. Press the eject button on the Blu-ray player and put your disc in the player.
  4. Use the Media control panel buttons to operate the Blu-ray, or the remote (keyboard tray or on top of the podium).
  5. Closed Caption for the Blu-ray can be turned on/off from the "subtitles" button on the remote, or from the menu system of your video disc.

Document Camera

  1. Press "Doc Cam" on the Media Control Panel
  2. Locate the power button on the document camera and tap to turn it on (light turns blue).
  3. Adjust the camera arm and head to show your document or demonstration the way you want it on the screen.
  4. If you need light, there is a switch on the front of the camera head that sets the camera light to off/low/high light
Important
turning off the camera requires twice pressing the power button: the first asks for a confirmation, pressing again will turn it off.


Troubleshooting:

Are the power lights lit up? Is the plug fully seated into the connector Is the volume up Is the light on the Media Control Panel lit solid for the source you are using? Does a different source work? Is the Yamaha receiver turned on (in the rack)?


Need Help?? Want Training??

Call x6270 for Classroom Support

Retrieved from "http://helpwiki.evergreen.edu/wiki/index.php?title=Library_1540&oldid=38951"

The Evergreen State College