Help Wiki - User contributions [en]

Non Fiction Media - Final Screening Exporting

2013-06-04T20:38:49Z

Blaari09:

The final screening will be done using a laptop to playback individual files via Quicktime.

'''Checklist:'''
*Confirm that all audio stays between -6dB and -12dB
*Add two seconds of black at the beginning of your timeline
*Add five seconds of black at the end, after both the picture and audio has faded out
*Confirm that your project is set to be 1920x1080. If this is not the case please contact MML staff for assistance.
 

'''Exporting from Premiere Pro'''
#After you have completed the items on the checklist click on the sequence panel and span the work area bar to match the length of the content
#From the top menu, go to File > Export Media
#In the dialog box that appears select ''Work Area'' as the Source Range
#Click on the ''Add to Queue'' button, Premiere will pass off the file to open in Media Encoder
 

'''Media Encoder Settings'''
#In the Preset Browser click and drag the preset ''Quicktime H.264''over the preset that is already in the queue screen and replace it: ''Quicktime / 1920x1080 / 29.97 / 10 Mbps / AAC /48kHz / Stereo''
#In the queue panel, click on the Output File path to choose a location to save to, and name the file descriptively
#Click the green play button, it should take around 20 minutes for a 10 minute video to export
 

'''Submit'''
#Once exporting has finished, open the file in Quicktime player and watch and listen critically for any glitches. Is there two seconds of black at the start, and five seconds of black at the end???
#Post the final file to Nimrod > CCAM Dropbox > ____NFM Final Screening (labeled in red)

[[Category:2012-2013]]

MIDI Controlers - MML

2013-05-09T17:27:48Z

Blaari09: /* Restore Factory Settings */

=== KORG nanoKEY2 ===
==== Restore Factory Settings ====
# Hold down '''OCT -''' button, '''OCT +''' button and '''MOD''' button while connecting power through USB cable from the computer.
# The '''OCT -''' button and the '''OCT +''' button will blink when the factory-set default condition has been restored.

=== KORG nanoKONTROL2 ===
==== Restore Factory Settings ====
# Hold down '''PREV TRACK''' button, '''NEXT TRACK''' button and '''CYCLE''' button while connecting power through USB cable from the computer.
# The ''transport'' buttons (except '''CYCLE''') will blink when the factory-set default state has been restored.

=== KORG nanoPAD2 ===
==== Restore Factory Settings ====
# Hold down '''KEY/RANGE''' button, '''SCALE/TAP''' button and '''SCENE''' button while connecting power through USB cable from the computer.
# The ''scene LEDs'' will stop blinking when the factory-set default state has been restored.

===Axiom 61===
==== Restore Factory Settings ====
* Hold down both of the'''-/+''' buttons while connecting power through USB cable from the computer.

[[Category:Multimedia Lab]]

MIDI Controlers - MML

2013-05-09T17:24:55Z

Blaari09: /* KORG nanoKONTROL2 */

MIDI Controlers - MML

2013-05-09T17:24:45Z

Blaari09: /* Restore Factory Settings */

=== KORG nanoKEY2 ===
==== Restore Factory Settings ====
# Hold down '''OCT -''' button, '''OCT +''' button and '''MOD''' button while connecting power through USB cable from the computer.
# The '''OCT -''' button and the '''OCT +''' button will blink when the factory-set default condition has been restored.

=== KORG nanoKONTROL2 ===
==== Restore Factory Settings ====
# Hold down '''PREV TRACK''' button, '''NEXT TRACK''' button and '''CYCLE''' button while connecting power through USB cable from the computer.
# The ''transport'' buttons (except '''CYCLE''') will blink when the factory-set default state has been restored.

=== KORG nanoKONTROL2 ===
=== KORG nanoPAD2 ===
==== Restore Factory Settings ====
# Hold down '''KEY/RANGE''' button, '''SCALE/TAP''' button and '''SCENE''' button while connecting power through USB cable from the computer.
# The ''scene LEDs'' will stop blinking when the factory-set default state has been restored.

[[Category:Multimedia Lab]]

MIDI Controlers - MML

2013-05-09T17:24:22Z

Blaari09: /* KORG nanoKONTROL2 */

=== KORG nanoKEY2 ===
==== Restore Factory Settings ====
# Hold down '''OCT -''' button, '''OCT +''' button and '''MOD''' button while connecting power through USB cable from the computer.
# The '''OCT -''' button and the '''OCT +''' button will blink when the factory-set default condition has been restored.

=== KORG nanoKONTROL2 ===
==== Restore Factory Settings ====
# Hold down '''PREV TRACK''' button, '''NEXT TRACK''' button and '''CYCLE''' button while connecting power through USB cable from the computer.
# The ''transport'' buttons (except '''CYCLE''') will blink when the factory-set default state has been restored.

=== KORG nanoKONTROL2 ===
==== Restore Factory Settings ====
# Hold down '''PREV TRACK''' button, '''NEXT TRACK''' button and '''CYCLE''' button while connecting power through USB cable from the computer.
# The ''transport'' buttons (except '''CYCLE''') will blink when the factory-set default state has been restored.

=== KORG nanoPAD2 ===
==== Restore Factory Settings ====
# Hold down '''KEY/RANGE''' button, '''SCALE/TAP''' button and '''SCENE''' button while connecting power through USB cable from the computer.
# The ''scene LEDs'' will stop blinking when the factory-set default state has been restored.

[[Category:Multimedia Lab]]

MIDI Controlers - MML

2013-05-09T17:21:36Z

Blaari09: /* KORG nanoKEY2 */

MIDI Controlers - MML

2013-05-09T17:17:25Z

Blaari09: /* Restore Factory Settings */

= KORG nanoKEY2 =
==== Restore Factory Settings ====
# Hold down '''OCT -''' button, '''OCT +''' button and '''MOD''' button while connecting power through USB cable from the computer.
# The '''OCT -''' button and the '''OCT +''' button will blink when the factory-set default condition has been restored.

[[Category:Multimedia Lab]]

MIDI Controlers - MML

2013-05-09T17:16:45Z

Blaari09: Created page with " = KORG nanoKEY2 = == Restore Factory Settings == # Hold down '''OCT -''' button, '''OCT +''' button and '''MOD''' button while connecting power through USB cable from the com..."

= KORG nanoKEY2 =
== Restore Factory Settings ==
# Hold down '''OCT -''' button, '''OCT +''' button and '''MOD''' button while connecting power through USB cable from the computer.
# The '''OCT -''' button and the '''OCT +''' button will blink when the factory-set default condition has been restored.

[[Category:Multimedia Lab]]

Exporting Video from After Effects

2013-04-25T18:55:39Z

Blaari09:

==After Effects==
==== Graphics with an Alpha Channel ====
To render graphics for the CCAM that have an ''Alpha Channel'' (transparent layer):
# Add your composition to the render queue by selecting '''Composition > Add to Render Queue''' from the Menu bar.
# Access the Output Module Settings window by clicking on the word '''Lossless''' in the Render Queue.
# In Video Output, under ''Channels'' select '''RGB+Alpha''' from the drop down box.
# Click on '''Format Options''' to access the QuickTime Options window.
# Set your ''Video Codec'' to '''Animation''' or '''Apple ProRes 4444''' in the drop down box.
# Back in the Render Queue, select your output destination and click '''Render''' in the upper right hand corner to render out your graphic.
*''Note: Always render your graphics to a file on the local computer, and then copy your file onto the server after it is finished.''

==== Graphics without an Alpha Channel ====
To render graphics for the CCAM that do not have an ''Alpha Channel'' (transparent layer):
# Add your composition to the render queue by selecting '''Composition > Add to Render Queue''' from the Menu bar.
# Access the Output Module Settings window by clicking on the word '''Lossless''' in the Render Queue.
# In Video Output, under ''Channels'' select '''RGB''' from the drop down box.
# Click on '''Format Options''' to access the QuickTime Options window.
# Set your ''Video Codec'' to '''Apple ProRes 422''' in the drop down box.
# Back in the Render Queue, select your output destination and click '''Render''' in the upper right hand corner to render out your graphic.
*''Note: Always render your graphics to a file on the local computer, and then copy your file onto the server after it is finished.''

[[Category:CCAM]]
[[Category:Multimedia_Lab]]
[[Category:After_Effects]]

Exporting Video from After Effects

2013-04-23T17:49:57Z

Blaari09: /* Test */

apple.com

[[Category:CCAM]]
[[Category:Multimedia_Lab]]

Exporting Video from After Effects

2013-04-23T17:44:36Z

Blaari09:

apple.com
== Test ==
test [[Import_from_Flip_Cameras_-_FCP | fcp]]
[http://documentation.apple.com/ http://documentation.apple.com/].

[http://documentation.apple.com/ documentation.apple.com/].

[[Category:CCAM]]
[[Category:Multimedia_Lab]]

--[[User:Blaari09|Blaari09]] ([[User talk:Blaari09|talk]]) 10:36, 23 April 2013 (PDT)

Exporting Video from After Effects

2013-04-23T17:43:54Z

Blaari09:

apple.com
== Test ==
test [[http://wikis.evergreen.edu/computing/index.php/Import_from_Flip_Cameras_-_FCP|fcp]]
[http://documentation.apple.com/ http://documentation.apple.com/].

[http://documentation.apple.com/ documentation.apple.com/].

[[Category:CCAM]]
[[Category:Multimedia_Lab]]

--[[User:Blaari09|Blaari09]] ([[User talk:Blaari09|talk]]) 10:36, 23 April 2013 (PDT)

Exporting Video from After Effects

2013-04-23T17:43:31Z

Blaari09:

apple.com
== Test ==
tes [[http://wikis.evergreen.edu/computing/index.php/Import_from_Flip_Cameras_-_FCP|fcp]]
[http://documentation.apple.com/ http://documentation.apple.com/].

[http://documentation.apple.com/ documentation.apple.com/].

[[Category:CCAM]]
[[Category:Multimedia_Lab]]

--[[User:Blaari09|Blaari09]] ([[User talk:Blaari09|talk]]) 10:36, 23 April 2013 (PDT)

Exporting Video from After Effects

2013-04-23T17:41:58Z

Blaari09:

== Test ==

[http://documentation.apple.com/ http://documentation.apple.com/].

[http://documentation.apple.com/ documentation.apple.com/].

[[Category:CCAM]]
[[Category:Multimedia_Lab]]

--[[User:Blaari09|Blaari09]] ([[User talk:Blaari09|talk]]) 10:36, 23 April 2013 (PDT)

Exporting Video from After Effects

2013-04-23T17:41:29Z

Blaari09:

Exporting Video from After Effects

2013-04-23T17:36:28Z

Blaari09:

#
# == Test ==
# # fkpgo
# # fkkofr
# #* vk[fkg[s
# # lvgpl
#
# # nvhjhv

''k,jkj''
'''kkjjk'''yfjyjfjfgu

# hdjgukg
#: jyjrt
# jyfjut
# hey
# [[Category:CCAM]]
# [[Category:Multimedia_Lab]]
#

--[[User:Blaari09|Blaari09]] ([[User talk:Blaari09|talk]]) 10:36, 23 April 2013 (PDT)

Exporting Video from After Effects

2013-04-23T17:34:54Z

Blaari09:

#
# == Test ==
# # fkpgo
# # fkkofr
# #* vk[fkg[s
# # lvgpl
#
# # nvhjhv

'''kkjjk'''yfjyjfjfgu

# hdjgukg
#: jyjrt
# jyfjut
# hey
# [[Category:CCAM]]
# [[Category:Multimedia_Lab]]
#

Exporting Video from After Effects

2013-04-23T17:34:06Z

Blaari09:

#
# == Test ==
# # fkpgo
# # fkkofr
# #* vk[fkg[s
# # lvgpl
#
# # nvhjhv 

# hdjgukg
#: jyjrt
# jyfjut 
# hey
# [[Category:CCAM]]
# [[Category:Multimedia_Lab]]
#

Exporting Video from After Effects

2013-04-23T17:33:53Z

Blaari09:

#
# == Test ==
# # fkpgo
# # fkkofr
# #* vk[fkg[s
# # lvgpl
#
# # nvhjhv 

# hdjgukg
#: jyjrt
# jyfjut 

# hey
# [[Category:CCAM]]
# [[Category:Multimedia_Lab]]
#

Exporting Video from After Effects

2013-04-23T17:33:10Z

Blaari09:

#
# == Test ==
# # fkpgo
# # fkkofr
# #* vk[fkg[s
# # lvgpl
#
# # nvhjhv
#
#
# hdjgukg
#: jyjrt
# jyfjut
# hey
# [[Category:CCAM]]
# [[Category:Multimedia_Lab]]
#

Exporting Video from After Effects

2013-04-23T17:32:23Z

Blaari09:

== Test ==
# fkpgo
# fkkofr
#* vk[fkg[s
# lvgpl

# nvhjhv

* # * hdjgukg
* # * jyjrt
* # * jyfjut
* # * hey
[[Category:CCAM]]
[[Category:Multimedia_Lab]]

Exporting Video from After Effects

2013-04-23T17:30:40Z

Blaari09:

== Test ==
# fkpgo
# fkkofr
#* vk[fkg[s
# lvgpl

# nvhjhv

[[Category:CCAM]]
[[Category:Multimedia_Lab]]

Exporting Video from After Effects

2013-04-23T17:30:26Z

Blaari09:

== Test ==
# fkpgo
# fkkofr
** vk[fkg[s
# lvgpl

# nvhjhv

[[Category:CCAM]]
[[Category:Multimedia_Lab]]

Exporting Video from After Effects

2013-04-23T17:30:10Z

Blaari09: /* Test */

== Test ==
# fkpgo
# fkkofr
* vk[fkg[s
# lvgpl

# nvhjhv

[[Category:CCAM]]
[[Category:Multimedia_Lab]]

Exporting Video from After Effects

2013-04-23T17:29:46Z

Blaari09:

== Test ==
# fkpgo
# fkkofr
#* vk[fkg[s
# lvgpl

# nvhjhv

[[Category:CCAM]]
[[Category:Multimedia_Lab]]

Exporting Video from After Effects

2013-04-23T17:29:20Z

Blaari09: /* Test */

== Test ==
# fkpgo
# fkkofr
## vk[fkg[s
# lvgpl

# nvhjhv

[[Category:CCAM]]
[[Category:Multimedia_Lab]]

Exporting Video from After Effects

2013-04-23T17:29:00Z

Blaari09:

== Test ==
# fkpgo
# fkkofr
## vk[fkg[s
# lvgpl

#

[[Category:CCAM]]
[[Category:Multimedia_Lab]]

Exporting Video from After Effects

2013-04-23T17:22:53Z

Blaari09: Created page with " Test Category:CCAM Category:Multimedia_Lab"

Test
[[Category:CCAM]]
[[Category:Multimedia_Lab]]

Keyboard Shortcuts - After Effects

2012-12-14T17:39:58Z

Blaari09:

'''Layer Transformation Shortcuts'''

A - Anchor Point

T – Opacity

U – All

P - Position

S – Scale

R – Rotation

'''Masks'''

MM - All Mask Settings

M – Mask Path

F - Mask Feather

TT - Mask Opacity

'''General Shortcuts'''

Cmnd + Z – Undo

Cmnd + N – New Composition

Cmnd + K – Composition Settings

Cmnd + I - Import

Cmnd + Y – New Solid

Shift + Cmnd + Y = Solid Settings

'''Toolbar Shortcuts'''

Q – Shape Tool

G – Pen Tool

Y – Pan Behind Tool

Cmnd + T – Type Tool

Cmnd + B – Brush Tool/Clone Stamp Tool/Eraser Tool

'''Tips & Tricks'''

Shift + Drag – Snapping

B - Sets beginning of your workspace in the timeline based on the position of the playhead

N - Sets the end of your workspace in the timeline based on the position of the playhead

~ - Makes your current panel fullscreen. Press again and it will return to it's previous place in the workspace.

Press and hold the space bar to temporarily switch to the hand tool.

[[category:After Effects]]

Advanced Media- Intro to Premiere Pro

2012-10-10T16:27:08Z

Blaari09: Created page with '==Intro to the Intro== Welcome to Premiere Pro. It follows the basic design of most editing software: a '''Project''' window where you can view all of the assets you have broug…'

==Intro to the Intro==

Welcome to Premiere Pro. It follows the basic design of most editing software: a '''Project''' window where you can view all of the assets you have brought into a project, a '''Source''' window where you can view assets and set in and out points before bringing them into a '''Sequence'''. A '''Program''' window where you see the video that has been placed into a '''Sequence''', and of course a '''Timeline''' window, where you will actually do most of your editing. You can have multiple '''Sequences''' in one '''Timeline''' window.

A unique feature of Premiere is the '''Media Browser''' window, which gives you Finder like access to your media, allowing you to easily preview and import media from any source. Premiere recognizes the file structure for most file-based camera systems, makes it even easier to view and import your files.

----
==File Organization==

It is '''super important''' to organize your media and project files. This cannot be stressed enough. Misplaced files will slow you down when you most need to work quickly. Misplaced files will devour countless hours of your life. It is really pretty easy to keep everything organized if you follow these simple steps

===Before you even think of opening Premiere===
(These steps apply the first time you start a project. For returning to a project, see below)
# Create a folder in '''Storage''' on your local computer. Name it something you will remember. Do '''not''' use special characters other than dash or underscore.
# Create 4 (or more) subfolders for your media files, and for Premiere's needs. Label them: Video, Audio, Stills, and Premiere_Foo
# Move '''ALL''' of your media from flash cards, other servers, cameras, recorders, whatever, into the appropriate folder, i.e., move all of your video files into the "Video" folder, audio & music files into the "Audio" folder, etc. Don't worry about Premiere_Foo just yet.
# After you have consolidated all of your files in to these folders, you should now '''disconnect or eject all servers & memory cards'''. This will prevent you from inadvertently trying to work directly from a troublesome source.

===When you are done editing for the day===
# Save & Quit Premiere Pro
# Connect to your share on Orca (or any other designated server)
# In the Finder, find your project folder in '''Storage'''
# Move your project folder to your server storage share
# Et voilá! Your project folder is now safely stored and ready to use on your next editing session.

===To work with an existing project===
Once you have created a project, stored all of your assets in a folder and then stored that folder on a network share, the next time you want to use that project is easy-peasy.
# Connect to your network share (Orca, Nimrod, etc)
# Drag your project folder to the '''Storage''' drive on your local computer
# Disconnect from the network share once the transfer is complete
# Double click on your project file
# Rinse & repeat!

==The Interface==

===Windows===
Windows are called panels in Premiere. Under the '''Windows''' menu you can open various '''panels'''. Many windows have a '''Panel Menu''' in the top right corner which can be used to change settings for that window. [[File:Panel_menu_pp.jpg‎‎]]

Any panel can be expanded to full screen by pressing the '''`''' (tilde) key while the mouse is over that panel. Press the '''`''' key again to return to normal.

====Media Browser====
The '''Media Browser''' makes it easy to browse to files, and to find them by their type. Unlike the '''Import''' dialog box, the '''Media Browser''' can be left open, and docked, like any other panel. The '''Media Browser''' gives you quick access to all your assets while you edit. Also, you can use the '''Media Browser''' to import clips copied from video storage media such as P2 cards, SxS cards, XDCAM disks, and DVDs. When you import an asset Premiere Pro leaves it in its current location, and creates a clip in the Project panel that points to it. '''Always''' transfer files from their file-based media to a local hard disk. Then, import them into Premiere Pro projects from the hard disk.

====Project====
The '''Project''' panel lists detailed information about each asset in your project. You can view and sort assets in either List view or Icon view. List view displays additional information about each asset. You can customize the information it displays to meet the needs of your project. In Icon view, you can use the "hover scrub" feature to preview footage without having to open it into a new window.

====Info====
The Info panel displays several data about a selected item, and timecode information for clips under the current-time indicator in the '''Timeline'''.

====Timeline====
In Premiere Pro, you specify the settings for each sequence, trim your clips, and assemble clips in sequences.

You assemble and rearrange sequences in one or more Timeline panels, where their clips, transitions, and effects are represented graphically. You can open a particular sequence on a tab in a Timeline panel among other sequences, or keep it by itself in its own dedicated Timeline panel.

====Tools====
This panel is for selecting which tool to use in the '''Timeline'''. The mouse pointer will change shape when it is over the '''Timeline'''. Tools can also be change with keyboard shortcuts.

[[File:Tools_panel_pp.jpg|right]] A. Selection tool

B. Ripple Edit tool

C. Rate Stretch tool

D. Slip tool

E. Pen tool

F. Hand tool

G. Track Select tool

H. Rolling Edit tool

I. Razor tool

J. Slide tool

K. Zoom tool

====Source====
The '''Source Monitor''' plays back individual clips. In the '''Source Monitor''', you prepare clips that you want to add to a sequence. You set In points and Out points, and specify the clip’s source tracks (audio or video). You can also insert clip markers and add clips to a sequence in a '''Timeline''' panel.

====Program====

The '''Program Monitor''' plays back the sequence of clips that you are assembling. It’s your view of the active sequence in a '''Timeline panel'''. You can set sequence markers and specify sequence In points and Out points. Sequence In points and Out points define where frames are added or removed from the sequence.

----

==Starting A New Project==

====General====
* '''Video Display Format: Timecode'''
* '''Audio Display Format: Milliseconds'''
* '''Capture:''' This setting is only applies if you are capturing from DV or HDV tape. When using file based video this can be ignored.

====Scratch Disks====

Here is where we get to use the "Premiere_Foo" folder that we created earlier! Foo!

#'''Captured Video''' should get set to the "Video" folder inside your project folder.
#'''Captured Audio''' should get set to the "Audio" folder inside your project folder.
#'''Video Previews''' should be set to "Premiere_Foo". You do not need to know anything about these files. Putting them in "Premiere_Foo" just keeps them organized out of your way.
#'''Audio Previews''' should also be set to "Premiere_Foo".

====Location====
# Click the '''Browse''' button.
# Navigate to the project folder you created earlier.
# Give your project an awesome name & hit '''Okay'''!

===New Sequence Settings===

It is easier to import your files into Premiere before creating a new sequence.

# In the '''New Sequence''' dialog click '''cancel'''.
# Import your video files into the project.
# Pick a file which represents the majority of your files (in terms of dimensions, frame rate, compression etc).
# Select that file in the '''Project''' panel. Right click and select '''New Sequence From Clip'''.
# A new Sequence will be added to the '''Project''' panel and it will open int the '''Timeline''' panel.
# Change the sequence name to something meaningful by clicking on the sequence name in the '''Project''' panel.

----

==Exporting==

===Using Premiere===
# Click in the '''Timeline''' of the sequence you want to export.
# Go to '''File > Export > Media...'''.
# In the bottom left choose what part of the sequence to export.
## '''Entire Sequence''': exports the entire sequence.
## '''Sequence In/Out''': Exports the are between any in and out points set in the sequence.
## '''Work Area''': Exports the '''Work Area''' set in the '''Timeline'''.
## '''Custom''': Exports the area set by the triangles above this setting.
# For '''Export Settings chose a '''Format''' and a '''Preset'''.
# Next to '''Output Name''' click on the name in orange and name the files and choose a save location.
# Click '''Export''' to export.

===Using Adobe Media Encoder===
'''Adobe Media Encoder''' allows you to export multiple versions of the same sequence and it allows you to keep working in '''Premiere''' while export is encoding.
# To use Adobe Media Encoder first follow the steps above.
# '''Click''' the '''Queue''' button and '''Adobe Media Encoder''' will open.
# Drag a preset onto the name of your sequence to add the preset to the '''Queue'''.
# Click the '''Start Queue''' button (green play button) to start the exporting.

[[category:Premiere Pro]] [[category:Workshops - MML]]

[[category:Premiere Pro]]