http://helpwiki.evergreen.edu/wiki/api.php?action=feedcontributions&feedformat=atom&user=Jonsam12 2026-06-16T01:01:28Z User contributions MediaWiki 1.26.3 http://helpwiki.evergreen.edu/wiki/index.php?title=Start_Up_Procedure/Proficiency_-_COM_118&diff=26923 2015-10-22T19:18:17Z

<p>Jonsam12: /* SIGNAL FLOW */</p> <hr /> <div>===START UP PROCEDURES===<br /> #Log into the logbook<br /> #Explain the simple room flow<br /> #Explain the norms from the NEVE to the Apollos<br /> #Use the LG Display Remote to turn on Display monitors<br /> #Turn ON and login to the computer<br /> #Turn ON the two Power Bars. One is below the Apollos, and the other is on the rack<br /> #Power ON Apollo A Interface (wait to load: HOST, INT, 48)<br /> #Power ON Apollo B interface (wait to load: HOST, EXT, 48)<br /> #Make a new folder with your name on it in the Storage drive<br /> <br /> ===SIGNAL FLOW===<br /> #Go through the signal flow of an input channel<br /> #Explain when you would put the channel in TAPE<br /> #Patch a source into an input channel of the NEVE<br /> #Listen to that source<br /> #Explain the channel Cue function and master Cue section of the NEVE<br /> #Turn the Cue send 1 and 2 up on the channel, and monitor the Cue send volume<br /> #Open '''Digital Performer'''<br /> #Select - New - 118 Multitrack Template<br /> #Record the source that's on the NEVE<br /> #Listen to the outputs of Digital Performer<br /> #Explain the Cue function in DP and where the Cue sends go on the NEVE<br /> #Monitor and adjust the Cue send level in DP and on the NEVE<br /> #Patch the recorded channel into the Portico module (Channel 6)<br /> <br /> ===MONITORING SECTION===<br /> #Show where the monitor switches are<br /> #Explain what Apollo A Monitor Out Ext. 1 monitors<br /> #Run iTunes to hear a song<br /> #Explain what ST monitoring is<br /> #Explain what Cue 1/2 monitoring is<br /> <br /> ===SHUT DOWN PROCEDURES===<br /> #Normalize board<br /> #Turn OFF both Apollos<br /> #Clear patchbay, turn off the two power switches and the Display monitors<br /> #Log out of the logbook<br /> <br /> [[Category:COM 118]]</div>

Jonsam12 http://helpwiki.evergreen.edu/wiki/index.php?title=Start_Up_Procedure/Proficiency_-_COM_118&diff=26922 2015-10-22T19:17:53Z

<p>Jonsam12: /* SIGNAL FLOW */</p> <hr /> <div>===START UP PROCEDURES===<br /> #Log into the logbook<br /> #Explain the simple room flow<br /> #Explain the norms from the NEVE to the Apollos<br /> #Use the LG Display Remote to turn on Display monitors<br /> #Turn ON and login to the computer<br /> #Turn ON the two Power Bars. One is below the Apollos, and the other is on the rack<br /> #Power ON Apollo A Interface (wait to load: HOST, INT, 48)<br /> #Power ON Apollo B interface (wait to load: HOST, EXT, 48)<br /> #Make a new folder with your name on it in the Storage drive<br /> <br /> ===SIGNAL FLOW===<br /> #Go through the signal flow of an input channel<br /> #Explain when you would put the channel in TAPE<br /> #Patch a source into an input channel of the NEVE<br /> #Listen to that source<br /> #Explain the channel Cue function and master Cue section of the NEVE<br /> #Turn the Cue send 1 and 2 up on the channel, and monitor the Cue send volume<br /> #Open '''Digital Performer'''<br /> #Select - New - 118 Multitrack Template<br /> #Record the source that's on the NEVE<br /> #Listen to the Outputs of Digital Performer<br /> #Explain the Cue function in DP and where the Cue sends go on the NEVE<br /> #Monitor and adjust the Cue send level in DP and on the NEVE<br /> #Patch the recorded channel into the Portico module (Channel 6)<br /> <br /> ===MONITORING SECTION===<br /> #Show where the monitor switches are<br /> #Explain what Apollo A Monitor Out Ext. 1 monitors<br /> #Run iTunes to hear a song<br /> #Explain what ST monitoring is<br /> #Explain what Cue 1/2 monitoring is<br /> <br /> ===SHUT DOWN PROCEDURES===<br /> #Normalize board<br /> #Turn OFF both Apollos<br /> #Clear patchbay, turn off the two power switches and the Display monitors<br /> #Log out of the logbook<br /> <br /> [[Category:COM 118]]</div>

Jonsam12 http://helpwiki.evergreen.edu/wiki/index.php?title=Start_Up_Procedure/Proficiency_-_COM_118&diff=26921 2015-10-22T19:17:21Z

<p>Jonsam12: /* SIGNAL FLOW */</p> <hr /> <div>===START UP PROCEDURES===<br /> #Log into the logbook<br /> #Explain the simple room flow<br /> #Explain the norms from the NEVE to the Apollos<br /> #Use the LG Display Remote to turn on Display monitors<br /> #Turn ON and login to the computer<br /> #Turn ON the two Power Bars. One is below the Apollos, and the other is on the rack<br /> #Power ON Apollo A Interface (wait to load: HOST, INT, 48)<br /> #Power ON Apollo B interface (wait to load: HOST, EXT, 48)<br /> #Make a new folder with your name on it in the Storage drive<br /> <br /> ===SIGNAL FLOW===<br /> #Go through the signal flow of an input channel<br /> #Explain when you would put the channel in TAPE<br /> #Patch a source into an input channel of the NEVE<br /> #Listen to that source<br /> #Explain the channel Cue function and master Cue section of the NEVE<br /> #Turn the Cue send 1 and 2 up on the channel, and monitor the Cue send volume<br /> #Open '''Digital Performer'''<br /> #Select - New - 118 Multitrack Template<br /> #Record the source that's on the NEVE<br /> #Explain the Cue function in DP and where the Cue sends go on the NEVE<br /> #Monitor and adjust the Cue send level in DP and on the NEVE<br /> #Patch the recorded channel into the Portico module (Channel 6)<br /> <br /> ===MONITORING SECTION===<br /> #Show where the monitor switches are<br /> #Explain what Apollo A Monitor Out Ext. 1 monitors<br /> #Run iTunes to hear a song<br /> #Explain what ST monitoring is<br /> #Explain what Cue 1/2 monitoring is<br /> <br /> ===SHUT DOWN PROCEDURES===<br /> #Normalize board<br /> #Turn OFF both Apollos<br /> #Clear patchbay, turn off the two power switches and the Display monitors<br /> #Log out of the logbook<br /> <br /> [[Category:COM 118]]</div>

Jonsam12 http://helpwiki.evergreen.edu/wiki/index.php?title=File:Input_Bundles_Protools_111A_212.png&diff=26818 2015-10-20T18:43:46Z

<p>Jonsam12: Jonsam12 uploaded a new version of &amp;quot;File:Input Bundles Protools 111A 212.png&amp;quot;</p> <hr /> <div></div>

Jonsam12 http://helpwiki.evergreen.edu/wiki/index.php?title=Start_Up_Procedure/Proficiency_-_COM_118&diff=26786 2015-10-19T22:23:16Z

<p>Jonsam12: /* SHUT DOWN PROCEDURES */</p> <hr /> <div>===START UP PROCEDURES===<br /> #Log into the logbook<br /> #Explain the simple room flow<br /> #Explain the norms from the NEVE to the Apollos<br /> #Use the LG Display Remote to turn on Display monitors<br /> #Turn ON and login to the computer<br /> #Turn ON the two Power Bars. One is below the Apollos, and the other is on the rack<br /> #Power ON Apollo A Interface (wait to load: HOST, INT, 48)<br /> #Power ON Apollo B interface (wait to load: HOST, EXT, 48)<br /> #Make a new folder with your name on it in the Storage drive<br /> <br /> ===SIGNAL FLOW===<br /> #Go through the signal flow of an input channel<br /> #Explain when you would put the channel in TAPE<br /> #Patch a source into an input channel of the NEVE<br /> #Explain the channel Cue function and master Cue section of the NEVE<br /> #Turn the Cue send 1 and 2 up on the channel, and monitor the Cue send volume<br /> #Open '''Digital Performer'''<br /> #Select - New - 118 Multitrack Template<br /> #Record the source that's on the NEVE<br /> #Explain the Cue function in DP and where the Cue sends go on the NEVE<br /> #Monitor and adjust the Cue send level in DP and on the NEVE<br /> #Patch the recorded channel into the Portico module (Channel 6)<br /> ===MONITORING SECTION===<br /> #Show where the monitor switches are<br /> #Explain what Apollo A Monitor Out Ext. 1 monitors<br /> #Run iTunes to hear a song<br /> #Explain what ST monitoring is<br /> #Explain what Cue 1/2 monitoring is<br /> <br /> ===SHUT DOWN PROCEDURES===<br /> #Normalize board<br /> #Turn OFF both Apollos<br /> #Clear patchbay, turn off the two power switches and the Display monitors<br /> #Log out of the logbook<br /> <br /> [[Category:COM 118]]</div>

Jonsam12 http://helpwiki.evergreen.edu/wiki/index.php?title=Start_Up_Procedure/Proficiency_-_COM_118&diff=26785 2015-10-19T22:18:37Z

<p>Jonsam12: /* SHUT DOWN PROCEDURES */</p> <hr /> <div>===START UP PROCEDURES===<br /> #Log into the logbook<br /> #Explain the simple room flow<br /> #Explain the norms from the NEVE to the Apollos<br /> #Use the LG Display Remote to turn on Display monitors<br /> #Turn ON and login to the computer<br /> #Turn ON the two Power Bars. One is below the Apollos, and the other is on the rack<br /> #Power ON Apollo A Interface (wait to load: HOST, INT, 48)<br /> #Power ON Apollo B interface (wait to load: HOST, EXT, 48)<br /> #Make a new folder with your name on it in the Storage drive<br /> <br /> ===SIGNAL FLOW===<br /> #Go through the signal flow of an input channel<br /> #Explain when you would put the channel in TAPE<br /> #Patch a source into an input channel of the NEVE<br /> #Explain the channel Cue function and master Cue section of the NEVE<br /> #Turn the Cue send 1 and 2 up on the channel, and monitor the Cue send volume<br /> #Open '''Digital Performer'''<br /> #Select - New - 118 Multitrack Template<br /> #Record the source that's on the NEVE<br /> #Explain the Cue function in DP and where the Cue sends go on the NEVE<br /> #Monitor and adjust the Cue send level in DP and on the NEVE<br /> #Patch the recorded channel into the Portico module (Channel 6)<br /> ===MONITORING SECTION===<br /> #Show where the monitor switches are<br /> #Explain what Apollo A Monitor Out Ext. 1 monitors<br /> #Run iTunes to hear a song<br /> #Explain what ST monitoring is<br /> #Explain what Cue 1/2 monitoring is<br /> <br /> ===SHUT DOWN PROCEDURES===<br /> #Normalize board<br /> #Turn OFF both Apollos<br /> #Clear patchbay, turn off the two power switches and the Display monitors<br /> #Logout of the logbook<br /> <br /> [[Category:COM 118]]</div>

Jonsam12 http://helpwiki.evergreen.edu/wiki/index.php?title=Start_Up_Procedure/Proficiency_-_COM_118&diff=26784 2015-10-19T22:18:04Z

<p>Jonsam12: /* MONITORING SECTION */</p> <hr /> <div>===START UP PROCEDURES===<br /> #Log into the logbook<br /> #Explain the simple room flow<br /> #Explain the norms from the NEVE to the Apollos<br /> #Use the LG Display Remote to turn on Display monitors<br /> #Turn ON and login to the computer<br /> #Turn ON the two Power Bars. One is below the Apollos, and the other is on the rack<br /> #Power ON Apollo A Interface (wait to load: HOST, INT, 48)<br /> #Power ON Apollo B interface (wait to load: HOST, EXT, 48)<br /> #Make a new folder with your name on it in the Storage drive<br /> <br /> ===SIGNAL FLOW===<br /> #Go through the signal flow of an input channel<br /> #Explain when you would put the channel in TAPE<br /> #Patch a source into an input channel of the NEVE<br /> #Explain the channel Cue function and master Cue section of the NEVE<br /> #Turn the Cue send 1 and 2 up on the channel, and monitor the Cue send volume<br /> #Open '''Digital Performer'''<br /> #Select - New - 118 Multitrack Template<br /> #Record the source that's on the NEVE<br /> #Explain the Cue function in DP and where the Cue sends go on the NEVE<br /> #Monitor and adjust the Cue send level in DP and on the NEVE<br /> #Patch the recorded channel into the Portico module (Channel 6)<br /> ===MONITORING SECTION===<br /> #Show where the monitor switches are<br /> #Explain what Apollo A Monitor Out Ext. 1 monitors<br /> #Run iTunes to hear a song<br /> #Explain what ST monitoring is<br /> #Explain what Cue 1/2 monitoring is<br /> <br /> ===SHUT DOWN PROCEDURES===<br /> #Normalize board<br /> #Turn OFF both Apollos<br /> #Clear patchbay, turn off the two power switches and the Display monitors<br /> #Logout<br /> <br /> [[Category:COM 118]]</div>

Jonsam12 http://helpwiki.evergreen.edu/wiki/index.php?title=Start_Up_Procedure/Proficiency_-_COM_118&diff=26783 2015-10-19T22:12:50Z

<p>Jonsam12: /* START UP PROCEDURES */</p> <hr /> <div>===START UP PROCEDURES===<br /> #Log into the logbook<br /> #Explain the simple room flow<br /> #Explain the norms from the NEVE to the Apollos<br /> #Use the LG Display Remote to turn on Display monitors<br /> #Turn ON and login to the computer<br /> #Turn ON the two Power Bars. One is below the Apollos, and the other is on the rack<br /> #Power ON Apollo A Interface (wait to load: HOST, INT, 48)<br /> #Power ON Apollo B interface (wait to load: HOST, EXT, 48)<br /> #Make a new folder with your name on it in the Storage drive<br /> <br /> ===SIGNAL FLOW===<br /> #Go through the signal flow of an input channel<br /> #Explain when you would put the channel in TAPE<br /> #Patch a source into an input channel of the NEVE<br /> #Explain the channel Cue function and master Cue section of the NEVE<br /> #Turn the Cue send 1 and 2 up on the channel, and monitor the Cue send volume<br /> #Open '''Digital Performer'''<br /> #Select - New - 118 Multitrack Template<br /> #Record the source that's on the NEVE<br /> #Explain the Cue function in DP and where the Cue sends go on the NEVE<br /> #Monitor and adjust the Cue send level in DP and on the NEVE<br /> #Patch the recorded channel into the Portico module (Channel 6)<br /> ===MONITORING SECTION===<br /> #Run iTunes<br /> #Select &quot;Apollo A Monitor Out Ext. 1&quot; On NEVE console Control Room monitor select<br /> ===SHUT DOWN PROCEDURES===<br /> #Normalize board<br /> #Turn OFF both Apollos<br /> #Clear patchbay, turn off the two power switches and the Display monitors<br /> #Logout<br /> <br /> [[Category:COM 118]]</div>

Jonsam12 http://helpwiki.evergreen.edu/wiki/index.php?title=Start_Up_Procedure/Proficiency_-_COM_118&diff=26782 2015-10-19T22:12:25Z

<p>Jonsam12: /* SHUT DOWN PROCEDURES */</p> <hr /> <div>===START UP PROCEDURES===<br /> #Log into the logbook<br /> #Explain the simple room flow<br /> #Explain the norms from the NEVE to the Apollos<br /> #Use the LG Display Remote to turn on Display monitors<br /> #Turn ON and login to the computer<br /> #Turn ON the two Power Bars. One below the Apollos, and the other on the rack<br /> #Power ON Apollo A Interface (wait to load: HOST, INT, 48)<br /> #Power ON Apollo B interface (wait to load: HOST, EXT, 48)<br /> #Make a new folder with your name on it in the Storage drive<br /> <br /> ===SIGNAL FLOW===<br /> #Go through the signal flow of an input channel<br /> #Explain when you would put the channel in TAPE<br /> #Patch a source into an input channel of the NEVE<br /> #Explain the channel Cue function and master Cue section of the NEVE<br /> #Turn the Cue send 1 and 2 up on the channel, and monitor the Cue send volume<br /> #Open '''Digital Performer'''<br /> #Select - New - 118 Multitrack Template<br /> #Record the source that's on the NEVE<br /> #Explain the Cue function in DP and where the Cue sends go on the NEVE<br /> #Monitor and adjust the Cue send level in DP and on the NEVE<br /> #Patch the recorded channel into the Portico module (Channel 6)<br /> ===MONITORING SECTION===<br /> #Run iTunes<br /> #Select &quot;Apollo A Monitor Out Ext. 1&quot; On NEVE console Control Room monitor select<br /> ===SHUT DOWN PROCEDURES===<br /> #Normalize board<br /> #Turn OFF both Apollos<br /> #Clear patchbay, turn off the two power switches and the Display monitors<br /> #Logout<br /> <br /> [[Category:COM 118]]</div>

Jonsam12 http://helpwiki.evergreen.edu/wiki/index.php?title=Start_Up_Procedure/Proficiency_-_COM_118&diff=26781 2015-10-19T22:11:55Z

<p>Jonsam12: /* SHUT DOWN PROCEDURES */</p> <hr /> <div>===START UP PROCEDURES===<br /> #Log into the logbook<br /> #Explain the simple room flow<br /> #Explain the norms from the NEVE to the Apollos<br /> #Use the LG Display Remote to turn on Display monitors<br /> #Turn ON and login to the computer<br /> #Turn ON the two Power Bars. One below the Apollos, and the other on the rack<br /> #Power ON Apollo A Interface (wait to load: HOST, INT, 48)<br /> #Power ON Apollo B interface (wait to load: HOST, EXT, 48)<br /> #Make a new folder with your name on it in the Storage drive<br /> <br /> ===SIGNAL FLOW===<br /> #Go through the signal flow of an input channel<br /> #Explain when you would put the channel in TAPE<br /> #Patch a source into an input channel of the NEVE<br /> #Explain the channel Cue function and master Cue section of the NEVE<br /> #Turn the Cue send 1 and 2 up on the channel, and monitor the Cue send volume<br /> #Open '''Digital Performer'''<br /> #Select - New - 118 Multitrack Template<br /> #Record the source that's on the NEVE<br /> #Explain the Cue function in DP and where the Cue sends go on the NEVE<br /> #Monitor and adjust the Cue send level in DP and on the NEVE<br /> #Patch the recorded channel into the Portico module (Channel 6)<br /> ===MONITORING SECTION===<br /> #Run iTunes<br /> #Select &quot;Apollo A Monitor Out Ext. 1&quot; On NEVE console Control Room monitor select<br /> ===SHUT DOWN PROCEDURES===<br /> #Normalize board<br /> #Turn OFF both Apollos<br /> #Clear patchbay, turn off the two power switches and the TV<br /> #Logout<br /> <br /> [[Category:COM 118]]</div>

Jonsam12 http://helpwiki.evergreen.edu/wiki/index.php?title=Start_Up_Procedure/Proficiency_-_COM_118&diff=26780 2015-10-19T22:10:56Z

<p>Jonsam12: /* START UP PROCEDURES */</p> <hr /> <div>===START UP PROCEDURES===<br /> #Log into the logbook<br /> #Explain the simple room flow<br /> #Explain the norms from the NEVE to the Apollos<br /> #Use the LG Display Remote to turn on Display monitors<br /> #Turn ON and login to the computer<br /> #Turn ON the two Power Bars. One below the Apollos, and the other on the rack<br /> #Power ON Apollo A Interface (wait to load: HOST, INT, 48)<br /> #Power ON Apollo B interface (wait to load: HOST, EXT, 48)<br /> #Make a new folder with your name on it in the Storage drive<br /> <br /> ===SIGNAL FLOW===<br /> #Go through the signal flow of an input channel<br /> #Explain when you would put the channel in TAPE<br /> #Patch a source into an input channel of the NEVE<br /> #Explain the channel Cue function and master Cue section of the NEVE<br /> #Turn the Cue send 1 and 2 up on the channel, and monitor the Cue send volume<br /> #Open '''Digital Performer'''<br /> #Select - New - 118 Multitrack Template<br /> #Record the source that's on the NEVE<br /> #Explain the Cue function in DP and where the Cue sends go on the NEVE<br /> #Monitor and adjust the Cue send level in DP and on the NEVE<br /> #Patch the recorded channel into the Portico module (Channel 6)<br /> ===MONITORING SECTION===<br /> #Run iTunes<br /> #Select &quot;Apollo A Monitor Out Ext. 1&quot; On NEVE console Control Room monitor select<br /> ===SHUT DOWN PROCEDURES===<br /> #Normalize board<br /> #Clear patchbay, turn off the two power switches, turn off TV<br /> #Logout<br /> <br /> [[Category:COM 118]]</div>

Jonsam12 http://helpwiki.evergreen.edu/wiki/index.php?title=Start_Up_Procedure/Proficiency_-_COM_118&diff=26779 2015-10-19T22:10:00Z

<p>Jonsam12: /* START UP PROCEDURES */</p> <hr /> <div>===START UP PROCEDURES===<br /> #Log into the logbook<br /> #Explain the simple room flow<br /> #Explain the norms from the NEVE to the Apollos<br /> #Use the LG Display Remote to turn on Display monitors<br /> #Turn ON and login to the computer<br /> #Turn ON the two Power Bars below the Apollos and on the rack<br /> #Power ON Apollo A Interface (wait to load: HOST, INT, 48)<br /> #Power ON Apollo B interface (wait to load: HOST, EXT, 48)<br /> #Make a new folder with your name on it in the Storage drive<br /> <br /> ===SIGNAL FLOW===<br /> #Go through the signal flow of an input channel<br /> #Explain when you would put the channel in TAPE<br /> #Patch a source into an input channel of the NEVE<br /> #Explain the channel Cue function and master Cue section of the NEVE<br /> #Turn the Cue send 1 and 2 up on the channel, and monitor the Cue send volume<br /> #Open '''Digital Performer'''<br /> #Select - New - 118 Multitrack Template<br /> #Record the source that's on the NEVE<br /> #Explain the Cue function in DP and where the Cue sends go on the NEVE<br /> #Monitor and adjust the Cue send level in DP and on the NEVE<br /> #Patch the recorded channel into the Portico module (Channel 6)<br /> ===MONITORING SECTION===<br /> #Run iTunes<br /> #Select &quot;Apollo A Monitor Out Ext. 1&quot; On NEVE console Control Room monitor select<br /> ===SHUT DOWN PROCEDURES===<br /> #Normalize board<br /> #Clear patchbay, turn off the two power switches, turn off TV<br /> #Logout<br /> <br /> [[Category:COM 118]]</div>

Jonsam12 http://helpwiki.evergreen.edu/wiki/index.php?title=Start_Up_Procedure/Proficiency_-_COM_118&diff=26778 2015-10-19T22:09:27Z

<p>Jonsam12: /* START UP PROCEDURES */</p> <hr /> <div>===START UP PROCEDURES===<br /> #Log into the logbook<br /> #Explain the simple room flow<br /> #Explain the norms from the NEVE to the Apollos<br /> #Use the LG Display Remote to turn on Display monitors<br /> #Turn ON and login to the computer<br /> #Turn ON the two Power Bars below the Apollos and on the rack<br /> #Power ON Apollo A Interface (wait to load: HOST, INT, 48)<br /> #Power ON Apollo B interface (wait to load: HOST, EXT, 48)<br /> #Make new folder with your name in the Storage drive<br /> ===SIGNAL FLOW===<br /> #Go through the signal flow of an input channel<br /> #Explain when you would put the channel in TAPE<br /> #Patch a source into an input channel of the NEVE<br /> #Explain the channel Cue function and master Cue section of the NEVE<br /> #Turn the Cue send 1 and 2 up on the channel, and monitor the Cue send volume<br /> #Open '''Digital Performer'''<br /> #Select - New - 118 Multitrack Template<br /> #Record the source that's on the NEVE<br /> #Explain the Cue function in DP and where the Cue sends go on the NEVE<br /> #Monitor and adjust the Cue send level in DP and on the NEVE<br /> #Patch the recorded channel into the Portico module (Channel 6)<br /> ===MONITORING SECTION===<br /> #Run iTunes<br /> #Select &quot;Apollo A Monitor Out Ext. 1&quot; On NEVE console Control Room monitor select<br /> ===SHUT DOWN PROCEDURES===<br /> #Normalize board<br /> #Clear patchbay, turn off the two power switches, turn off TV<br /> #Logout<br /> <br /> [[Category:COM 118]]</div>

Jonsam12 http://helpwiki.evergreen.edu/wiki/index.php?title=Start_Up_Procedure/Proficiency_-_COM_118&diff=26777 2015-10-19T22:06:14Z

<p>Jonsam12: /* START UP PROCEDURES */</p> <hr /> <div>===START UP PROCEDURES===<br /> #Log into the logbook<br /> #Explain the simple room flow<br /> #Explain the norms from the NEVE to the Apollos<br /> #Use the LG Display Remote to turn on Display monitors<br /> #Turn ON and login to the computer<br /> #Turn ON the two Power Bars below the Apollos and on the rack<br /> #Power ON Apollo A Interface (wait to load: HOST, INT, 48)<br /> #Power ON Apollo B interface (wait to load: HOST, EXT, 48)<br /> #Make new folder with your name in the Storage drive<br /> <br /> #Go through the signal flow of an input channel<br /> #Explain when you would put the channel in TAPE<br /> #Patch a source into an input channel of the NEVE<br /> #Explain the channel Cue function and master Cue section of the NEVE<br /> #Turn the Cue send 1 and 2 up on the channel, and monitor the Cue send volume<br /> #Open '''Digital Performer'''<br /> #Select - New - 118 Multitrack Template<br /> #Record the source that's on the NEVE<br /> #Explain the Cue function in DP and where the Cue sends go on the NEVE<br /> #Monitor and adjust the Cue send level in DP and on the NEVE<br /> #Patch the recorded channel into the Portico module (Channel 6)<br /> <br /> #Run ITunes<br /> #Select &quot;Apollo A Monitor Out Ext. 1&quot; On NEVE console Control Room monitor select<br /> <br /> #Normalize board<br /> #Shutdown studio<br /> #Logout<br /> <br /> [[Category:COM 118]]</div>

Jonsam12 http://helpwiki.evergreen.edu/wiki/index.php?title=Start_Up_Procedure/Proficiency_-_COM_118&diff=26776 2015-10-19T22:06:00Z

<p>Jonsam12: /* Signal Tracing / Proficiency Check List - COM 118 */</p> <hr /> <div>==START UP PROCEDURES==<br /> #Log into the logbook<br /> #Explain the simple room flow<br /> #Explain the norms from the NEVE to the Apollos<br /> #Use the LG Display Remote to turn on Display monitors<br /> #Turn ON and login to the computer<br /> #Turn ON the two Power Bars below the Apollos and on the rack<br /> #Power ON Apollo A Interface (wait to load: HOST, INT, 48)<br /> #Power ON Apollo B interface (wait to load: HOST, EXT, 48)<br /> #Make new folder with your name in the Storage drive<br /> <br /> #Go through the signal flow of an input channel<br /> #Explain when you would put the channel in TAPE<br /> #Patch a source into an input channel of the NEVE<br /> #Explain the channel Cue function and master Cue section of the NEVE<br /> #Turn the Cue send 1 and 2 up on the channel, and monitor the Cue send volume<br /> #Open '''Digital Performer'''<br /> #Select - New - 118 Multitrack Template<br /> #Record the source that's on the NEVE<br /> #Explain the Cue function in DP and where the Cue sends go on the NEVE<br /> #Monitor and adjust the Cue send level in DP and on the NEVE<br /> #Patch the recorded channel into the Portico module (Channel 6)<br /> <br /> #Run ITunes<br /> #Select &quot;Apollo A Monitor Out Ext. 1&quot; On NEVE console Control Room monitor select<br /> <br /> #Normalize board<br /> #Shutdown studio<br /> #Logout<br /> <br /> [[Category:COM 118]]</div>

Jonsam12 http://helpwiki.evergreen.edu/wiki/index.php?title=Start_Up_Procedure/Proficiency_-_COM_118&diff=26775 2015-10-19T22:05:41Z

<p>Jonsam12: /* Signal Tracing / Proficiency Check List - COM 118 */</p> <hr /> <div>===Signal Tracing / Proficiency Check List - COM 118===<br /> <br /> ==START UP PROCEDURES==<br /> #Log into the logbook<br /> #Explain the simple room flow<br /> #Explain the norms from the NEVE to the Apollos<br /> #Use the LG Display Remote to turn on Display monitors<br /> #Turn ON and login to the computer<br /> #Turn ON the two Power Bars below the Apollos and on the rack<br /> #Power ON Apollo A Interface (wait to load: HOST, INT, 48)<br /> #Power ON Apollo B interface (wait to load: HOST, EXT, 48)<br /> #Make new folder with your name in the Storage drive<br /> <br /> #Go through the signal flow of an input channel<br /> #Explain when you would put the channel in TAPE<br /> #Patch a source into an input channel of the NEVE<br /> #Explain the channel Cue function and master Cue section of the NEVE<br /> #Turn the Cue send 1 and 2 up on the channel, and monitor the Cue send volume<br /> #Open '''Digital Performer'''<br /> #Select - New - 118 Multitrack Template<br /> #Record the source that's on the NEVE<br /> #Explain the Cue function in DP and where the Cue sends go on the NEVE<br /> #Monitor and adjust the Cue send level in DP and on the NEVE<br /> #Patch the recorded channel into the Portico module (Channel 6)<br /> <br /> #Run ITunes<br /> #Select &quot;Apollo A Monitor Out Ext. 1&quot; On NEVE console Control Room monitor select<br /> <br /> #Normalize board<br /> #Shutdown studio<br /> #Logout<br /> <br /> [[Category:COM 118]]</div>

Jonsam12 http://helpwiki.evergreen.edu/wiki/index.php?title=Start_Up_Procedure/Proficiency_-_COM_118&diff=26774 2015-10-19T22:03:39Z

<p>Jonsam12: </p> <hr /> <div>===Signal Tracing / Proficiency Check List - COM 118===<br /> #Log into the logbook<br /> #Explain the simple room flow<br /> #Explain the norms from the NEVE to the Apollos<br /> #Use the LG Display Remote to turn on Display monitors<br /> #Turn ON and login to the computer<br /> #Turn ON the two Power Bars below the Apollos and on the rack<br /> #Power ON Apollo A Interface (wait to load: HOST, INT, 48)<br /> #Power ON Apollo B interface (wait to load: HOST, EXT, 48)<br /> #Make new folder with your name in the Storage drive<br /> <br /> #Go through the signal flow of an input channel<br /> #Explain when you would put the channel in TAPE<br /> #Patch a source into an input channel of the NEVE<br /> #Explain the channel Cue function and master Cue section of the NEVE<br /> #Turn the Cue send 1 and 2 up on the channel, and monitor the Cue send volume<br /> #Open '''Digital Performer'''<br /> #Select - New - 118 Multitrack Template<br /> #Record the source that's on the NEVE<br /> #Explain the Cue function in DP and where the Cue sends go on the NEVE<br /> #Monitor and adjust the Cue send level in DP and on the NEVE<br /> #Patch the recorded channel into the Portico module (Channel 6)<br /> <br /> #Run ITunes<br /> #Select &quot;Apollo A Monitor Out Ext. 1&quot; On NEVE console Control Room monitor select<br /> <br /> #Normalize board<br /> #Shutdown studio<br /> #Logout<br /> <br /> [[Category:COM 118]]</div>

Jonsam12