Help Wiki - User contributions [en]

APS Sony HXR HD Camcorder Operating Guide

2019-01-12T20:12:28Z

Medialoan10: /* PRECAUTIONS */

[[File:SONY HXR N5.jpg| SONY HXR N5U CAMCORDER]]

[http://www.evergreen.edu/medialoan/docs/aps-docs/FINAL_HXR-NX5U_Ops_Manual.pdf Sony HXR Complete Manual - PDF] 
[http://blogs.evergreen.edu/medialoan/2014/03/27/sony-hxr-nx5u-nxcam/ Video Tutorials] 
==INTRODUCTION==
The Sony HXR-NX5U is a prosumer HD camcorder that records to memory cards utilizing the AVCHD format. This camcorder provides high quality, long duration recording with dual memory card slots, state-of-the-art G lens and 3 CMOS sensors. As with all Media Loan Equipment, '''''YOU ARE 100% FINANCIALLY RESPONSIBLE''''' for the HXR and all accessories when you check this camera out from APS.
==PRECAUTIONS==
*'''DO NOT HOLD THE CAMCORDER BY THE:'''
:::LENS HOOD
:::LCD PANEL
:::INTERNAL MICROPHONE
:::MICROPHONE OR MICROPHONE HOLDER
:::VIEWFINDER
*'''PROTECT THE HXR FROM WATER AND SOURCES OF MOISTURE OR SALT WATER/SPRAY. THE CAMERA IS NOT WATER RESISTANT'''
 
*'''DO NOT EXPOSE THE BATTERY PACK TO WATER. THE BATTERY PACK IS NOT WATER RESISTANT'''
 
*'''DO NOT SHAKE, KNOCK, DROP OR SUBJECT THE HXR TO EXCESSIVE SHOCK. '''
 
*'''CONNECT CABLES TO THE CAMCORDER WITH THEIR TERMINALS PLACED THE CORRECT WAY. SQUEEZING THE TERMINALS INTO THE HXR JACKS MAY DAMAGE THEM OR RESULT IN A MALFUNCTION OF THE CAMCORDER'''
 
*'''DO NOT EXPOSE THE CAMCORDER'S VIEWFINDER, LENS, LCD SCREEN TO THE SUN OR STRONG LIGHT SOURCE FOR EXTENDED PERIODS. INTENSE LIGHT SOURCES, ESPECIALLY THE SUN, WILL CONVERGE ON THE VIEWFINDER OR LENS AND DAMAGE THE INTERNAL PARTS OF THE CAMCORDER.'''
 
*'''ALWAYS CLOSE THE LENS COVER AND STORE IN CASE WHEN NOT IN USE'''
 
*'''DO NOT APPLY ANY LIQUID (CLEANING OR OTHERWISE) DIRECTLY TO THE LCD SCREEN'''
 
*'''IF THE CAMCORDER IS BROUGHT FROM A COLD PLACE TO A WARM PLACE, MOISTURE MAY CONDENSE INSIDE THE CAMCORDER AND CAUSE A MALFUNCTION. WHEN YOU BRING THE HXR FROM A COLD PLACE TO A WARM PLACE, PUT CAMCORDER IN A PLASTIC BAG AND SEAL IT TIGHTLY. REMOVE THE BAG WHEN THE AIR TEMPERATURE INSIDE THE PLASTIC BAG HAS REACHED AMBIENT TEMPERATURE (AFTER 1 HOUR)'''

==SUPPLYING POWER TO THE HXR==
===CHARGING THE BATTERY PACK===
APS provides two Lithium battery packs when you check out the HXR. Use the supplied AC Adapter/Charger to charge these batteries before use.
# Set the mode switch to charge
# Connect the power cord to the AC Adapter/Charger
# Connect the power cord to the wall outlet.
# Place the battery pack in the slot of the AC Adapter/Charger, press down, and slide battery until the charge lamp turns on and charging starts.
When the battery pack reaches a normal charge, the charge lamp turns off. You can continue to charge the battery pack for an additional hour for a full charge, which lets you use the battery a little longer. Remove the battery pack from the AC Adapter/Charger when the charge is completed.
===ATTACHING/REMOVING THE BATTERY PACK===
To attach the battery pack, press the battery against the back of the camcorder and slide it down.
 
To remove the battery pack, slide the '''POWER''' switch to '''OFF'''. Push the '''BAT RELEASE''' button and remove the battery pack.
===AC ADAPTER/CHARGER===
#Connect the power cord to the AC Adapter/Charger
#Connect the power cord to the wall outlet
#Connect the connecting cord to the AC Adapter/Charger
#Set mode switch of the AC Adapter/Charger to '''VCR/CAMERA'''
#Press the connecting part of the connecting cord against the back of the HXR in the Battery slot and slide it down
* Use a nearby wall outlet when using the AC Adapter/Charger. '''Disconnect the AC Adapter/Charger from the wall outlet immediately if any malfunction occurs while using the camcorder.'''
* '''DO NOT''' use the AC Adapter/Charger placed in a narrow space, such as between a wall and furniture.
* '''DO NOT''' short-circuit the DC plug of the AC Adapter/Charger or battery terminal with any metallic objects. This may cause a malfunction.
* '''UNPLUG THE AC ADAPTER''' from the camcorder and wall socket when camcorder is not in use. Even if your camcorder is turned off, AC power is still supplied to it while connected to the wall outlet via the AC Adapter/Charger.
==OPERATING THE MENU==
# Set the '''POWER''' switch to ON
# Press the '''MENU''' button
# Turn the '''SEL/PUSH EXEC''' dial until the icon of the desired menu is highlighted, then press the dial to select the menu.
# Turn the '''SEL/PUSH EXEC''' dial until the desired menu item is highlighted, then press the dial to select the item.
# Turn the '''SEL/PUSH EXEC''' dial until the desired setting is highlighted, the press the dial to select.
# Press the '''MENU''' button to hide the menu screen. To return to the previous screen, select '''RETURN'''.
*'''TIP''': You may select menu items with the </> buttons.
**'''NOTE''': The available menu items vary depending on the context of your camcorder during recording or playback.
==MEMORY CARDS==
APS supplies two, 32GB memory cards (installed) when you check out the HXR camcorder. This should provide you with ample recording time, even at the highest quality settings. Should you require additional memory cards for your production, you can use "Memory Stick PRO Duo" media, "Memory Stick PRO-HG Duo" media, SD memory cards and, SDHC memory cards.
* '''Remeber to re-install the memory cards supplied by APS before returning the camera should you choose to use your own media to avoid charges.'''
Before recording, format the memory card(s).
# With the camcorder powered on, press the '''MODE''' button.
# Touch '''MANAGE MEDIA''' setting '''MEDIA FORMAT'''
# Select the recording media to be formatted
# Select YES. The HXR will ask you to verify your selection.
*'''TIP''': The easiest wat to retrieve your files is to make a disk image of the memory card. You can check out a card reader from Media Loan and use the MML or Non-Linear Editing Suites to make your disk image(s). You can then use Final Cut Pro/Adobe Premiere to log and transfer your video for editing.
** '''NOTE''': While [Executing...] is displayed, do not operate the buttons on the camcorder, disconnect the AC Adapter/Charger, or removing recording media from the camcorder. (The access lamp is light or flashing while formatting recording media.)
===NOTES ON RECORDING===
'''Estimated Recording Time on one 32 GB card in minutes with HD Audio Format set to Linear PCM/Dolby Digital:'''
{| class="wikitable"
|-
! AVCHD 24M (FX) !! AVCHD 17M (FH) !! AVCHD 9M (HQ) !! AVCHD 5M (LP)
|-
| 170/180 || 225/235 || 385/435 || 605/750
|}
* When the access lamp is lit or flashing red, the camcorder is writing data on the recording media. Do not remove the battery pack or the AC Adapter/Charger.
* If a movie file exceeds 2GB during recording, the camcorder divides the file and create a new file automatically.
* The menu settings are stored in your camcorder when you turn the '''POWER''' switch to OFF. Do not remove battery pack or AC Adapter/Charger.
==RECORDING==
# Open the shutter of the lens hood.
# Slide the '''POWER''' switch to ON while pressing the green button.
The recording lamp lights up during recording.
To STOP recording, press the record button or the handle record button again.
*'''TIP''': When recording in high definition image quality (HD), the aspect ratio is fixed to 16:9. When recording in standard definition image quality (SD), you can switch the aspect ratio to 4:3.
*'''TIP''': For low angle recording, the handle record button is convenient. Release the '''HOLD''' lever to enable the handle record button. It might be helpful if you set the LCD panel face up or close it after turning it face down, or life the viewfinder up during the low angle recording.
** '''NOTE''': the camcorder will switch from Memory Card A to Memory Card B just before space runs out on Card A (and vice versa). '''Do not eject memory card that is currently being used for recording. Replace only the memory card whose slot lamp is off.'''
===SELECTING RECORDING QUALITY===
You can set the recording image quality to high definition image quality (HD) or standard definition image quality (SD).
To change the setting:
# Press '''MENU'''
# Select REC/OUT settings
# Select REC SET
# Select HD/SD SET
===SELECTING THE RECORDING FORMAT===
You can select the recording format (bit-rate, image size, frame rate, scanning system). The default setting is HD 1080/60i FX/SD 480/60i HQ.
To change the setting value:
# Press '''MENU'''
# Select REC/OUT settings
# Select REC SET
# Select REC FORMAT
If you select HD 1080/60i FX (the default), movies are recorded with the following format:
* HD - High Definition image quality
* 1080 - Effective scanning lines
* 60 - Frame Rate
* i - Scanning system
* FX - Recording mode
====SETTING DESCRIPTION====
Bit Rate:
{| class="wikitable"
|-
! FX !! FH !! HQ !! LP
|-
| Max 24 Mbps || Approx 17 Mbps || Approx 9 Mbps || Approx 5 Mbps
|}
Image Size:
{| class="wikitable"
|-
! FX !! FH !! HQ !! SP
|-
| 1920x1080/1280x720 || 1920x1080/1280x720 || HD recording 1440x1080 SD recording 720x480 || 1440x1080
|}
Frame rate: 24,30 or 60
Scanning system:
{| class="wikitable"
|-
! i !! p !! pSCAN
|-
| Interlaced || Progressive || Recording images of progressive scanning as interlace signal (60i)
|}
*For a complete list of setting values, see the complete manual, available on [http://www.evergreen.edu/medialoan/aps/docs/FINAL_HXR-NX5U_Ops_Manual.pdf here].
**'''NOTE''': The recording mode is fixed to FX or FH with the progressive scanning system.
**'''NOTE''': When the recording format is changed to or from 720/60p, you will be prompted to reboot the camcorder. Select YES. Otherwise, you cannot switch the recording format.
==ADJUSTING THE ZOOM==
===USING THE POWER ZOOM===
The power zoom lever is pressure sensitive. For a slower zoom use less pressure and for a faster zoom use more pressure.
*'''NOTE''': Be sure to keep your finger on the power zoom lever. If you move your finger off the power zoom lever, the operation sound of the power zoom lever mat also be recorded.
===USING THE HANDLE ZOOM===
* Set the handle zoom switch to VAR or FIX
* Press the handle zoom lever to zoom in or out
When you set the handle zoom switch to VAR, you can zoom in or out at variable speed.
When you set the handle zoom switch to FIX, you can zoom in or out at fixed speed set in HANDLE ZOOM.
You cannot use the handle zoom lever when the handle zoom switch is set to OFF.
===USING THE ZOOM RING===
You can zoom at the desired speed by turning the zoom ring. Fine adjustment is also possible.
Turn the zoom ring at moderate speed. If you turn it too fast, the zoom speed may lag behind the zoom ring rotation speed, or the operation sound of the zoom may also be recorded.
====ADJUSTING THE FOCUS MANUALLY====
# Set the FOCUS switch to MAN
# Rotate the focus ring and adjust the focus.
*'''TIP''': It is easier to focus on the subject when you use the zoom function. Move the power zoom lever towards T (telephoto) to adjust the focus, and then towards W (wide angle) to adjust the zoom/compose your shot recording.
====PUSH AUTO FOCUS====
Record the subject while pressing and holding the PUSH AUTO button. If you release the button, the setting returns to manual focusing. Use this function to shift the focus on one subject to another (Rack Focus). The scenes will shift smoothly.
==ADJUSTING THE IMAGE BRIGHTNESS==
You can adjust the image brightness by adjusting the iris, gain, shutter speed or by reducing the light volume with the ND Filter.
*'''NOTE''': You cannot use the back light function and the spotlight when iris, gain and shutter speed are adjusted manually.
*'''NOTE''': AE SHIFT is not effective temporarily while you adjust the iris, gain, and shutter speed manually.
===ADJUSTING THE IRIS===
You can manually adjust the iris to control the volume of the light entering the lens. By adjusting the iris, you can change or close the aperture of the lens, which is expressed as an F value between F1.6 and F11. The volume of the light increases the more you open the aperture (decreasing F value). The volume of light decreases the more that you close the aperture (increasing F value). The current F value appears on the screen.
# During recording or standby, set the '''AUTO/MANUAL''' switch to MANUAL.
# Press the '''IRIS''' button if "A" is displayed next to current iris value.
# Adjust the iris with the iris ring.
*'''TIP''': The F value becomes close to F3.4 as the zoom position changes from W to T even when you open the aperture by setting the F value low then F3.4, such as F1.6.
*'''TIP''': The range of focus, an important effect of the aperture, is called depth of field. The depth of field gets shallower as the aperture is opened and deeper as the aperture is closed.
===ADJUSTING THE GAIN===
You can adjust the gain manually when you do not want to use the AGC (Automatic Gain Control).
# During recording or standby, set the '''AUTO/MANUAL'''switch to MANUAL.
# Press the '''GAIN''' button if "A" is displayed next to current gain value.
# Set the gain switch to H,M or L. The gain value set for the selected fain switch position appears on the screen. You can set the gain value for each gain switch from [GAIN SET] of the (CAMERA SET) menu.
===GAIN SET===
you can set gain values for H, M, and L positions of the '''GAIN''' switch. The default settings of [H], [M] and [L] are 18 dB, 9 dB, and 0 dB respectively.
# Press the '''MENU''' button, select CAMERA SET then GAIN SET.
# Select [H], [M] or [L] with the '''SEL/PUSH EXEC''' dial.
# Set the gain value with the '''SEL/PUSH EXEC''' dial, then press the dial. You can select the value between -6 dB and -21 dB by 3 dB. The larger the value, the higher the gain.
# Select [OK] with the '''SEL/PUSH EXEC''' dial.
# Press the '''MENU''' button to hide the menu screen.
====SMOOTH GAIN====
You can set the transition speed at which the gain setting shifts from one value to another, set for the '''GAIN''' switch positions, when you switch the '''GAIN''' switch from a position to another. You can select the transition speed from [FAST], [MIDDLE] and [SLOW] or set to [OFF]. The default setting is [OFF].
===ADJUSTING THE SHUTTER SPEED===
You can manually adjust and fix the shutter speed. You can make a moving object look still or emphasize the movement of a moving subject by adjusting the shutter speed.
# During recording or standby, set the '''AUTO/MANUAL''' switch
# Press the '''SHUTTER SPEED''' button until the shutter speed value is highlighted.
# Change the shutter speed displayed on the screen by turning the '''SEL/PUSH EXEC''' dial. You can adjust the shutter speed in a range 1/4 second through 1/10000 second. The denominator of the set shutter speed appears on the screen when you set the shutter speed to 1/100 second. The larger the value on the screen, the faster the shutter speed.
# Press the '''SEL/PUSH EXEC''' dial to lock the shutter speed. To readjust the shutter speed, do steps 2 to 4 again.
===ADJUSTING THE ND FILTER===
You can record the subject clearly by using the ND filter when the recording environment is too bright. The ND filters 1, 2, and 3 reduce the volume of light to about 1/4, 1/16 and 1/64 respectively.
If ND1 flashes during the iris automatic adjustment, set the ND filter to 1. If ND2 flashes during the iris automatic adjustment, set the ND filter to 2. If ND3 flashes during the iris automatic adjustment, set the ND filter to 3. The ND filter indicator will stop flashing and remain on the screen.
If NDOFF flashes set the ND filter to off. The ND filter icon will disappear from the screen.
*'''NOTE''': If you change the ND filter to OFF, the ND filter icon will disappear from the screen.
*'''NOTE''': When adjusting the iris manually, the ND filter icon does not flash even if the light volume should be adjusted with the ND filter.
*'''NOTE''': If the camcorder cannot detect the ND filter position (OFF/1/2/3), ND flashes on the screen. Make sure that the ND filter is set correctly.
**'''TIP''': While recording a bright subject, diffraction may occur if you close the aperture further down, resulting in a fuzzy focus (this is a common phenomenon with video cameras). The ND filter suppresses this phenomenon and gives better recording results.
===WHITE BALANCE===
You can adjust and fix white balance according to the lighting conditions of recording environment. You can store white balance values in memory A and memory B. Unless a white balance is readjusted, values will remain even after the power has been turned off.
====SETTING WHITE BALANCE====
# During recording or standby, set the '''AUTO/MANUAL''' switch to MANUAL.
# Press the '''WHT BAL''' button.
# Set the white balance memory switch to '''A''' or '''B'''.
# Capture a white subject, such as white paper, full-screen in the same lighting condition as the subject.
# Press the '''WHT BAL''' button (one push) WHT BAL A or WHT BAL B starts flashing rapidly. It will stay on when the white balance adjustment is completed and the adjusted value is stored in WHT BAL A or WHT BAL B.
*'''NOTE''': When a white balance adjustment value has not been obtained successfully, WHT BAL A or WHT BAL B turns from rapid flashing to slow flashing. Adjust the subject appropriately and set the shutter speed to auto or around 1/60, the try adjusting white balance again.
====ZEBRA STRIPING====
You can display a zebra pattern as a guide for adjusting brightness. Zebra stripes are the only real indication of lighting levels. The Zebra pattern is a stripe pattern displayed where the image will be overexposed over a certain level and detail will be lost.
You can select the brightness level between 70 and 100 or 100+. The default setting is [70]. 70 or 80 are good Luma values for Caucasian tones. 100 IRE is the upper limit of legal video and is the correct value of white.
# Press the '''MENU''' button.
# Select DISPLAY SET with the '''SEL/PUSH EXEC''' dial.
# Select ZEBRA with the '''SEL/PUSH EXEC''' dial.
# Select the appropriate level.
*'''NOTE''': When you select [ON], the Zebra icon (a square with diagonal lines) and the brightness level appear on the screen. The zebra pattern will not be recorded with the image. the default setting is [OFF].
==AUDIO SETUP==
===CHANNEL SETTING===
# Select input with the '''CH1''' (INT MIC/INPUT 1) switch and the '''CH2''' (INT MIC/INPUT1/INPUT2).
# Set '''INPUT1''' to an appropriate position for the microphone connected to the INPUT1 jack.
* LINE: For inputting sound from an audio device.
* MIC: For inputting sound from an external microphone that does not support the +48V power source (phantom power).
* MIC+48V: For inputting sound from a device that supports the +48v power source, including the supplied microphone.
When you connect a microphone to the INPUT2 jack, set the INPUT2 switch to an appropriate position for that microphone.
'''WHEN THE CH1 SWITCH IS SET TO INT MIC'''
{| class="wikitable"
|-
! CH2 SWITCH POSITION !! INPUT CHANNEL !! SOURCE
|-
| INT MIC || Internal microphone (L) || CH1
|-
| INT MIC || Internal microphone (R) || CH2*)
|-
| INPUT1 || Internal microphone (mono) || CH1
|-
| INPUT1 || XLR INPUT1 || CH2**
|-
| INPUT2 || Internal microphone (mono) || CH1
|-
| INPUT2 || Internal microphone (mono) || CH2
|}
'''WHEN THE CH1 SWITCH IS SET TO INPUT1'''
{| class="wikitable"
|-
! CH2 SWITCH !! INPUT CHANNEL !! SOURCE
|-
| INT MIC || XLR INPUT1 || CH1
|-
| INT MIC || Internal microphone (mono) || CH2**
|-
| INPUT1 || XLR INPUT1 || CH1
|-
| INPUT1 || XLR INPUT1 || CH2**
|-
| INPUT2 || XLR INPUT1 || CH1
|-
| INPUT2 || XLR INPUT2 || CH2**
|}

* The recording level of channel 2 is synchronized with that of channel 1 when only the internal microphone is used. The recording level of channel 2 is controlled with '''CH1''' (AUDIO LEVEL) dial and the '''CH1''' (AUTO/MAN) switch.
* You can adjust the recording levels of channel 1 and channel 2 separately.
*'''NOTE''': Do not operate the '''INPUT1/INPUT2''' switches during recording to prevent noise from being recorded.
*'''NOTE''': When you connect a device that supports the +48V power source to the INPUT1 or INPUT2 jack, set the '''INPUT1/INPUT2''' switches to MIC+48v prior to connecting the device. When you disconnect the device, set the '''INPUT1/INPUT2''' switch to MIC first, then disconnect it.
*'''NOTE''': When you connect a microphone that does not support the +48V power source to the INPUT1 or INPUT2 jack, set the '''INPUT1/INPUT2''' to MIC. If you use it with the INPUT1/INPUT2 switch set to MIC+48V, it may damage or the recorded sound be distorted.

===ADJUSTING THE VOLUME===
You can adjust the volume of an internal microphone or a microphone connected to the INPUT1/INPUT2 jack.
# Set '''AUTO/MAN''' (CH1/CH2) switch of the channel to be adjust to MAN.
# Turn the '''AUDIO LEVEL''' dial to adjust the volume during recording or standby.
===SETTING THE HEADPHONE SOUND===
You can select the channel, CH1 or Ch2, to output from the headphone. You can select the channel, Ch1 or CH2 or Stereo Mix, to output from the headphone.
==TIME CODE and USER BIT==
The camcorder records movies accompanied by time data, such as time code and user bit. Display the setting screen by pressing the '''MENU''' and select (TC/UB SET) with the '''SEL/PUSH EXEC''' dial.
You can synchronize the time code of this camcorder with the time code of another camcorder. See pages 44-45 of the complete manual ([http://www.evergreen.edu/medialoan/aps/docs/FINAL_HXR-NX5U_Ops_Manual.pdf available here]) for instructions.
===PRESETTING THE TIME CODE===
# Select [TC PRESET] with the '''SEL/PUSH EXEC''' dial.
# Select [PRESET] with the '''SEL/PUSH EXEC''' dial.
# Select the first 2 digits with the '''SEL/PUSH EXEC''' dial. You can set the time code between 00:00:00:00 and 23:59:59:29.
# Set other digits by repeating step 3.
# Select [OK] with the '''SEL/PUSH EXEC''' dial.
===TO RESET THE TIME CODE===
You can reset the time code (00:00:00:00). Select [RESET] in step 2 of "PRESETTING THE TIME CODE."
===PRESETTING THE USER BIT===
# Select [UB PRESET] with the '''SEL/PUSH EXEC''' dial.
# Select [PRESET] with the '''SE:/PRESET EXEC''' dial.
# Select the first 2 digits with the '''SEL/PUSH EXEC''' dial.
# Set other digits by repeating step 3.
# Select [OK] with the '''SEL/PUSH EXEC''' dial.
===TO RESET THE USER BIT===
You can reset the user bit (00 00 00 00) Select [RESET in step 2 of "PRESETTING THE USER BIT."
==PLAYBACK==
Press the '''VISUAL INDEX''' button or the '''MODE''' button followed by touching '''PLAY''' then [VISUAL INDEX] on the screen. To play back movies, touch recording media you want to play back. Touch the playback mode and select the desired image quality of movies. Touch the thumbnail of the movie you want to play twice.
[[Category:Media Loan]]

Cables and Adapters Catalog

2018-09-06T20:58:16Z

Medialoan10:

{| class="wikitable" background: LightYellow; "
!TESC
SKU
!IMAGE
!TYPE
!AUDIO/
VIDEO
!USAGE
|-
|XMM-MF
|[[File:Cable 1.jpg|centre|thumb|200x200px]]
|MINI MALE -
MINI FEMALE
|AUDIO
|Extension cable for microphones, headphones,
smartphones, tablets, or other media players.
|-
|XMF-MF
|[[File:Cable 2.jpg|centre|thumb|200x200px]]
|MINI FEMALE -
MINI FEMALE
|AUDIO
|Extension cable for microphones, headphones,
smartphones, tablets, or other media players.
|-
|X-MM-MM
|[[File:Cable 3.jpg|centre|thumb|200x200px]]
|MINI MALE -
MINI MALE
|AUDIO
|Extension cable for microphones, headphones,
smartphones, tablets, or other media players.
|-
|Y-MM-MF
|[[File:Cable 4.jpg|centre|thumb|200x200px]]
|MINI MALE -
MINI FEMALE Y
|AUDIO
|Extension cable for microphones, headphones,
smartphones, tablets, or other media players.
|-
|XPOFPOM
|[[File:Cable 5.jpg|centre|thumb|200x200px]]
|RCA MALE -
RCA FEMALE
|AUDIO/
VIDEO
|Adaptor to extend the length of your mono cable,
subwoofer cable, digital audio cable or video cable
whilst maintaining an optimized connection.
|-
|YPOMPOM
|[[File:Cable 6.jpg|centre|thumb|200x200px]]
|RCA MALE -
RCA MALE Y
|AUDIO/
VIDEO
|Ideal for home-entertainment and high-fidelity (HiFi)
systems. The split RCA on one end allows you to
connect to multiple devices.
|-
|XMM-POM
|[[File:Cable 7.jpg|centre|thumb|200x200px]]
|RCA MALE -
MINI MALE
|AUDIO
|Adapter cable connects a smartphone, tablet, or
MP3 player to a speaker, stereo receiver, or other

RCA-enabled device.
|-
|XMF-POF
|[[File:Cable 8.jpg|centre|thumb|200x200px]]
|RCA MALE -
MINI FEMALE
|AUDIO
|This cable adapter allows you to plug a separate ⅛”
cable into this adapter and then connect to RCA
auxiliary inputs on your sound system or other device.
|-
|YPOM-MM
|[[File:Cable 9.jpg|centre|thumb|200x200px]]
|RCA MALE Y -

MINI MALE
|AUDIO
|Adapter cable connects various audio
devices with various kinds of stereo players.
|-
|YPOF-MM
|[[File:Cable 10.jpg|centre|thumb|200x200px]]
|RCA FEMALE Y -
MINI MALE
|AUDIO
|This adaptor is for converting sound from a computer
or any other source that outputs a ⅛” connector to a
receiver, amp, or any device that uses a stereo RCA input.
|-
|YPOMPOF
|[[File:Cable 11.jpg|centre|thumb|200x200px]]
|RCA FEMALE -
RCA MALE Y
|AUDIO/
VIDEO
|Adaptor or extension to a split RCA cable. Converts
the signal from dual RCA jacks (stereo) to a single

RCA jack (mono)
|-
|YPOFPOM
|[[File:Cable 12.jpg|centre|thumb|200x200px]]
|RCA FEMALE Y -
RCA MALE
|AUDIO/
VIDEO
|Split RCA cable to single. Use to split any RCA
jack into two jacks.
|-
|XPOMPOM
|[[File:Cable 14.jpg|centre|thumb|200x200px]]
|RCA MALE -
RCA MALE

(MONO)
|AUDIO
|For single channel audio to many devices. (mono)
|-
|ZPOMPOM
|[[File:Cable 15.jpg|centre|thumb|200x200px]]
|RCA MALE -
RCA MALE

(STEREO)
|AUDIO
|For connecting stereo speakers or other audio
devices. (stereo)
|-
|VPOMPOM
|[[File:Cable 16.jpg|centre|thumb|200x200px]]
|RCA MALE -
RCA MALE

A/V
|AUDIO/
VIDEO
|For connecting audio and video to a TV or
similar devices.
|-
|XPEMPOM
|[[File:Cable 17.jpg|centre|thumb|200x200px]]
|1/4" MALE -
RCA MALE
|AUDIO
|Connects audio devices with the ¼” Male to RCA
for amplifiers, Hi Fi stereo audio system, speakers,
recording equipment, home theater system etc.
|-
|YPOFPEM
|[[File:Cable 18.jpg|centre|thumb|200x200px]]
|1/4" MALE -
RCA FEMALE Y
|AUDIO
|This cable is designed to split a stereo signal.
|-
|YPEFPOF
|[[File:Cable 19.jpg|centre|thumb|200x200px]]
|1/4" FEMALE -
RCA FEMALE Y
|AUDIO
|These cables allow you to interface between ¼”
Stereo and split RCA, so you can connect
between speakers and audio devices that don't
both have the same connection types.
|-
|YPEFPOF
|[[File:Cable 20.jpg|centre|thumb|200x200px]]
|1/4" FEMALE Y -

RCA FEMALE
|AUDIO
|This cable adaptor is used for connecting a 1/4 “
cable to a RCA cable, used for splitting to multiple
inputs.
|-
|XPEFPEF
|[[File:Cable 21.jpg|centre|thumb|200x200px]]
|1/4" FEMALE -
1/4" FEMALE
|AUDIO
|This adaptor is designed to couple cables with phone
plugs. It works with mono or stereo plugs.
|-
|X-MM-PEF
|[[File:Cable 22.jpg|centre|thumb|200x200px]]
|1/4" FEMALE -
MINI MALE
|AUDIO
|These cables convert a large stereo 1/4" to a small
stereo 1/8" mini male.
|-
|YMM-PEM
|[[File:Cable 23.jpg|centre|thumb|200x200px]]
|1/4" MALE Y -
MINI MALE
|AUDIO
|Connects your laptop, iPhone, or iPod with a ⅛” jack
output with an AV receiver, amplifier, mixer, Hi-Fi stereo
audio system, recording equipment, or speakers with
dual ¼” jack inputs.
|-
|XPOF-XF
|[[File:Cable 24.jpg|centre|thumb|200x200px]]
|XLR FEMALE -
RCA FEMALE
|AUDIO
|Can be used to plug your mixer's XLR line outputs into
a standalone recorder's RCA inputs, as well as other
dives with the same outputs/inputs.
|-
|XPOM-XF
|[[File:Cable 25.jpg|centre|thumb|200x200px]]
|XLR FEMALE -
RCA MALE
|AUDIO
|This cable converts a balanced audio signal into an
unbalanced signal. This is good for sending audio
signals from an XLR source to an RCA input or
vice versa.
|-
|XPOM-XM
|[[File:Cable 26.jpg|centre|thumb|200x200px]]
|XLR MALE -

RCA MALE
|AUDIO
|This cable converts a balanced audio signal into an
unbalanced signal. This is good for sending audio
signals from an XLR source to an RCA input or
vice versa.
|-
|XPOF-XM
|[[File:Cable 27.jpg|centre|thumb|200x200px]]
|XLR MALE -
RCA FEMALE
|AUDIO
|This cable converts a balanced audio signal into an
unbalanced signal. This is good for sending audio
signals from an XLR source to an RCA input or
vice versa.
|-
|YPEFPEM
|[[File:Cable 28.jpg|centre|thumb|200x200px]]
|1/4" MALE -
1/4" FEMALE Y
|AUDIO
|For extending a ¼” male cable into a dual ¼” female
cable.
|-
|YPEMPOM
|[[File:Cable 29.jpg|centre|thumb|200x200px]]
|1/4" MALE -
RCA MALE Y
|AUDIO
|Connects audio devices with the ¼” Male to Dual
RCA for amplifiers, Hi Fi stereo audio system,

speakers, recording equipment, home theater

system etc.
|-
|XPEMPEM
|[[File:Cable 30.jpg|centre|thumb|200x200px]]
|1/4" MALE -
1/4" MALE
|AUDIO
|The audio cable male to male connectors are
compatible with microphones, musical instruments,

guitars, amplifiers, audio consoles, mixer audio,

and much more.
|-
|XPEFPEM
|[[File:Cable 31.jpg|centre|thumb|200x200px]]
|1/4" MALE -
1/4" FEMALE
|AUDIO
|This audio cable is an extension cable for a male to
male ¼” cable.
|-
|X-MF-XM
|[[File:Cable 32.jpg|centre|thumb|200x200px]]
|XLR MALE -
MINI FEMALE
|AUDIO
|This ⅛” to XLR cable connects devices with an ⅛” jack,
such as Phones, iPod, MP3 player, tablet, laptop, or voice
recorder, to a mixing console or speaker.
|-
|YPOF-MM
|[[File:Cable 33.jpg|centre|thumb|200x200px]]
|XLR FEMALE -
MINI MALE STEREO
|AUDIO
|This cable connects a professional mic to a camera,
computer, recorder, or any compatible device.
|-
|X-MF-XF
|[[File:Cable 34.jpg|centre|thumb|200x200px]]
|XLR FEMALE -
MINI FEMALE
|AUDIO
|This mini ⅛” female to XLR female cable can be used
to connect the stereo output of an audio device to a
single XLR line input on a mixing console.
|-
|X-MM-XF
|[[File:Cable 35.jpg|centre|thumb|200x200px]]
|XLR FEMALE -
MINI MALE MONO
|AUDIO
|This cable can be used with a microphone cable,
monitor speakers, audio interfaces, PA applications
and more.
|-
|X-XF-XF
|[[File:Cable 36.jpg|centre|thumb|200x200px]]
|(BARREL)
XLR FEMALE -

XLR MALE
|AUDIO
|Designed to eliminate interference associated with
ground loops.
|-
|XPEM-XF
|[[File:Cable 37.jpg|centre|thumb|200x200px]]
|(BARREL)
XLR FEMALE -

1/4" MALE
|AUDIO
|This adapter maintains the balanced nature of the
signal and is useful for line level signals requiring
connector changes.
|-
|X-BRIDG
|[[File:Cable 38a.jpg|centre|thumb|200x200px]]
|Bridging Transformer
|AUDIO
|Balanced low impedance to high impedance matching
transformer. Use for transmitting a low impedance
source to a high impedance source.
|-
|X-LOPAS
|[[File:Cable 38b.jpg|centre|thumb|200x200px]]
|Line Pad / LoPass
|AUDIO
|Passes low frequencies and cuts high frequencies.
Use to balance / cut out unwanted noise.
|-
|X-HIPAS
|[[File:Cable 38c.jpg|centre|thumb|200x200px]]
|HI-LO / HiPass
|AUDIO
|Cuts low frequencies and passes high frequencies.
Use to balance / cut out unwanted noise.
|-
|X-PRESE
|[[File:Cable 38d.jpg|centre|thumb|200x200px]]
|Phase
|AUDIO
|Takes a signal and puts it 180º out of phase.
Use to invert an electrical signal.
|-
|X-RESPON
|[[File:Cable 38e.jpg|centre|thumb|200x200px]]
|Response Shaper
|AUDIO
|Cuts frequencies at 5k. Use this to balance / cut
out unwanted noise.
|-
|XPEM-XM
|[[File:Cable 39.jpg|centre|thumb|200x200px]]
|XLR MALE -
1/4" MALE
|AUDIO
|This cable is designed to connect gear with balanced
phone outputs to gear with XLR inputs. It is ideal for
use in a variety of audio applications.
|-
|XPEM-XF
|[[File:Cable 40.jpg|centre|thumb|200x200px]]
|XLR FEMALE -
1/4" MALE
|AUDIO
|This cable is designed to connect gear with balanced
phone outputs to gear with XLR inputs. It is ideal for
use in a variety of audio applications.
|-
|YPEM-XM
|[[File:Cable 41.jpg|centre|thumb|200x200px]]
|XLR MALE -
1/4" MALE Y
|AUDIO
|This cable is perfect for connecting microphones with
1/4 inch jack to cameras, camcorders, or other
professional audio equipments with XLR connector.
Suitable for mic, mixer, amplifier, home theater and
other environments.
|-
|YPEM-XF
|[[File:Cable 42.jpg|centre|thumb|200x200px]]
|XLR FEMALE -
1/4" MALE Y
|AUDIO
|This cable is perfect for connecting microphones with
1/4 inch jack to cameras, camcorders, or other
professional audio equipments with XLR connector.
Suitable for mic, mixer, amplifier, home theater and
other environments.
|-
|X-XM-XM
|[[File:Cable 43.jpg|centre|thumb|200x200px]]
|XLR MALE -
XLR MALE
|AUDIO
|Designed to change an XLR input into an XLR output.
|-
|X-XF-XF
|[[File:Cable 44.jpg|centre|thumb|200x200px]]
|XLR FEMALE -
XLR FEMALE
|AUDIO
|Designed to change an XLR output into an XLR input.
|-
|Y-XF-XM
|[[File:Cable 45.jpg|centre|thumb|200x200px]]
|XLR MALE -
XLR FEMALE Y
|AUDIO
|This cable is designed to connect two XLR outputs
to one XLR input. It may be used to connect two
microphones to one channel on a mixing console
when a second channel is unavailable.
|-
|Y-XM-XF
|[[File:Cable 46.jpg|centre|thumb|200x200px]]
|XLR FEMALE -
XLR MALE Y
|AUDIO
|This Y-cable is designed to connect an XLR output
to two XLR inputs. It is ideal for assigning the signal
from a microphone to two channels on a mixing console.
|}
[[Category:Media Loan]]

Cables and Adapters Catalog

2018-09-06T19:45:56Z

Medialoan10:

{| class="wikitable" background: LightYellow; "
!TESC
SKU
!IMAGE
!TYPE
!AUDIO/
VIDEO
!USAGE
|-
|XMM-MF
|[[File:Cable 1.jpg|centre|thumb|200x200px]]
|MINI MALE -
MINI FEMALE
|AUDIO
|Extension cable for microphones, headphones,
smartphones, tablets, or other media players.
|-
|XMF-MF
|[[File:Cable 2.jpg|centre|thumb|200x200px]]
|MINI FEMALE -
MINI FEMALE
|AUDIO
|Extension cable for microphones, headphones,
smartphones, tablets, or other media players.
|-
|X-MM-MM
|[[File:Cable 3.jpg|centre|thumb|200x200px]]
|MINI MALE -
MINI MALE
|AUDIO
|Extension cable for microphones, headphones,
smartphones, tablets, or other media players.
|-
|Y-MM-MF
|[[File:Cable 4.jpg|centre|thumb|200x200px]]
|MINI MALE -
MINI FEMALE Y
|AUDIO
|Extension cable for microphones, headphones,
smartphones, tablets, or other media players.
|-
|XPOFPOM
|[[File:Cable 5.jpg|centre|thumb|200x200px]]
|RCA MALE -
RCA FEMALE
|AUDIO/
VIDEO
|Adaptor to extend the length of your mono cable,
subwoofer cable, digital audio cable or video cable

whilst maintaining an optimized connection.
|-
|YPOMPOM
|[[File:Cable 6.jpg|centre|thumb|200x200px]]
|RCA MALE -
RCA MALE Y
|AUDIO/
VIDEO
|Ideal for home-entertainment and high-fidelity (HiFi)
systems. The split RCA on one end allows you to

connect to multiple devices.
|-
|XMM-POM
|[[File:Cable 7.jpg|centre|thumb|200x200px]]
|RCA MALE -
MINI MALE
|AUDIO
|Adapter cable connects a smartphone, tablet, or
MP3 player to a speaker, stereo receiver, or other

RCA-enabled device.
|-
|XMF-POF
|[[File:Cable 8.jpg|centre|thumb|200x200px]]
|RCA MALE -
MINI FEMALE
|AUDIO
|This cable adapter allows you to plug a separate ⅛”
cable into this adapter and then connect to RCA

auxiliary inputs on your sound system or other device.
|-
|YPOM-MM
|[[File:Cable 9.jpg|centre|thumb|200x200px]]
|RCA MALE Y -

MINI MALE
|AUDIO
|Adapter cable connects various audio
devices with various kinds of stereo players.
|-
|YPOF-MM
|[[File:Cable 10.jpg|centre|thumb|200x200px]]
|RCA FEMALE Y -
MINI MALE
|AUDIO
|This adaptor is for converting sound from a computer
or any other source that outputs a ⅛” connector to a

eceiver, amp, or any device that uses a stereo RCA input.
|-
|YPOMPOF
|[[File:Cable 11.jpg|centre|thumb|200x200px]]
|RCA FEMALE -
RCA MALE Y
|AUDIO/
VIDEO
|Adaptor or extension to a split RCA cable. Converts
the signal from dual RCA jacks (stereo) to a single

RCA jack (mono)
|-
|YPOFPOM
|[[File:Cable 12.jpg|centre|thumb|200x200px]]
|RCA FEMALE Y -
RCA MALE
|AUDIO/
VIDEO
|Split RCA cable to single. Use to split any RCA
jack into two jacks.
|-
|XPOMPOM
|[[File:Cable 14.jpg|centre|thumb|200x200px]]
|RCA MALE -
RCA MALE

(MONO)
|AUDIO
|For single channel audio to many devices. (mono)
|-
|ZPOMPOM
|[[File:Cable 15.jpg|centre|thumb|200x200px]]
|RCA MALE -
RCA MALE

(STEREO)
|AUDIO
|For connecting stereo speakers or other audio
devices. (stereo)
|-
|VPOMPOM
|[[File:Cable 16.jpg|centre|thumb|200x200px]]
|RCA MALE -
RCA MALE

A/V
|AUDIO/
VIDEO
|For connecting audio and video to a TV or
similar devices.
|-
|XPEMPOM
|[[File:Cable 17.jpg|centre|thumb|200x200px]]
|1/4" MALE -
RCA MALE
|AUDIO
|Connects audio devices with the ¼” Male to RCA
for amplifiers, Hi Fi stereo audio system, speakers,

recording equipment, home theater system etc.
|-
|YPOFPEM
|[[File:Cable 18.jpg|centre|thumb|200x200px]]
|1/4" MALE -
RCA FEMALE Y
|AUDIO
|This cable is designed to split a stereo signal.
|-
|YPEFPOF
|[[File:Cable 19.jpg|centre|thumb|200x200px]]
|1/4" FEMALE -
RCA FEMALE Y
|AUDIO
|These cables allow you to interface between ¼”
Stereo and split RCA, so you can connect

between speakers and audio devices that don't

both have the same connection types.
|-
|YPEFPOF
|[[File:Cable 20.jpg|centre|thumb|200x200px]]
|1/4" FEMALE Y -

RCA FEMALE
|AUDIO
|This cable adaptor is used for connecting a 1/4 “
cable to a RCA cable, used for splitting to multiple

inputs.
|-
|XPEFPEF
|[[File:Cable 21.jpg|centre|thumb|200x200px]]
|1/4" FEMALE -
1/4" FEMALE
|AUDIO
|This adaptor is designed to couple cables with phone
plugs. It works with mono or stereo plugs.
|-
|X-MM-PEF
|[[File:Cable 22.jpg|centre|thumb|200x200px]]
|1/4" FEMALE -
MINI MALE
|AUDIO
|These cables convert a large stereo 1/4" to a small
stereo 1/8" mini male.
|-
|YMM-PEM
|[[File:Cable 23.jpg|centre|thumb|200x200px]]
|1/4" MALE Y -
MINI MALE
|AUDIO
|Connects your laptop, iPhone, or iPod with a ⅛” jack
output with an AV receiver, amplifier, mixer, Hi-Fi stereo

audio system, recording equipment, or speakers with

dual ¼” jack inputs.
|-
|XPOF-XF
|[[File:Cable 24.jpg|centre|thumb|200x200px]]
|XLR FEMALE -
RCA FEMALE
|AUDIO
|Can be used to plug your mixer's XLR line outputs into
a standalone recorder's RCA inputs, as well as other

dives with the same outputs/inputs.
|-
|XPOM-XF
|[[File:Cable 25.jpg|centre|thumb|200x200px]]
|XLR FEMALE -
RCA MALE
|AUDIO
|This cable converts a balanced audio signal into an
unbalanced signal. This is good for sending audio

signals from an XLR source to an RCA input or

vice versa.
|-
|XPOM-XM
|[[File:Cable 26.jpg|centre|thumb|200x200px]]
|XLR MALE -

RCA MALE
|AUDIO
|This cable converts a balanced audio signal into an
unbalanced signal. This is good for sending audio

signals from an XLR source to an RCA input or

vice versa.
|-
|XPOF-XM
|[[File:Cable 27.jpg|centre|thumb|200x200px]]
|XLR MALE -
RCA FEMALE
|AUDIO
|This cable converts a balanced audio signal into an
unbalanced signal. This is good for sending audio

signals from an XLR source to an RCA input or

vice versa.
|-
|YPEFPEM
|[[File:Cable 28.jpg|centre|thumb|200x200px]]
|1/4" MALE -
1/4" FEMALE Y
|AUDIO
|For extending a ¼” male cable into a dual ¼” female
cable.
|-
|YPEMPOM
|[[File:Cable 29.jpg|centre|thumb|200x200px]]
|1/4" MALE -
RCA MALE Y
|AUDIO
|Connects audio devices with the ¼” Male to Dual
RCA for amplifiers, Hi Fi stereo audio system,

speakers, recording equipment, home theater

system etc.
|-
|XPEMPEM
|[[File:Cable 30.jpg|centre|thumb|200x200px]]
|1/4" MALE -
1/4" MALE
|AUDIO
|The audio cable male to male connectors are
compatible with microphones, musical instruments,

guitars, amplifiers, audio consoles, mixer audio,

and much more.
|-
|XPEFPEM
|[[File:Cable 31.jpg|centre|thumb|200x200px]]
|1/4" MALE -
1/4" FEMALE
|AUDIO
|This audio cable is an extension cable for a male to
male ¼” cable.
|-
|X-MF-XM
|[[File:Cable 32.jpg|centre|thumb|200x200px]]
|XLR MALE -
MINI FEMALE
|AUDIO
|This ⅛” to XLR cable connects devices with an ⅛” jack,
such as Phones, iPod, MP3 player, tablet, laptop, or voice

recorder, to a mixing console or speaker.
|-
|YPOF-MM
|[[File:Cable 33.jpg|centre|thumb|200x200px]]
|XLR FEMALE -
MINI MALE STEREO
|AUDIO
|This cable connects a professional mic to a camera,
computer, recorder, or any compatible device.
|-
|X-MF-XF
|[[File:Cable 34.jpg|centre|thumb|200x200px]]
|XLR FEMALE -
MINI FEMALE
|AUDIO
|This mini ⅛” female to XLR female cable can be used
to connect the stereo output of an audio device to a

single XLR line input on a mixing console.
|-
|X-MM-XF
|[[File:Cable 35.jpg|centre|thumb|200x200px]]
|XLR FEMALE -
MINI MALE MONO
|AUDIO
|This cable can be used with a microphone cable,
monitor speakers, audio interfaces, PA applications

and more.
|-
|X-XF-XF
|[[File:Cable 36.jpg|centre|thumb|200x200px]]
|(BARREL)
XLR FEMALE -

XLR MALE
|AUDIO
|Designed to eliminate interference associated with
ground loops.
|-
|XPEM-XF
|[[File:Cable 37.jpg|centre|thumb|200x200px]]
|(BARREL)
XLR FEMALE -

1/4" MALE
|AUDIO
|This adapter maintains the balanced nature of the
signal and is useful for line level signals requiring

connector changes.
|-
|X-BRIDG
|[[File:Cable 38a.jpg|centre|thumb|200x200px]]
|Bridging Transformer
|AUDIO
|Balanced low impedance to high impedance matching
transformer. Use for transmitting a low impedance

source to a high impedance source.
|-
|X-LOPAS
|[[File:Cable 38b.jpg|centre|thumb|200x200px]]
|Line Pad / LoPass
|AUDIO
|Passes low frequencies and cuts high frequencies.
Use to balance / cut out unwanted noise.
|-
|X-HIPAS
|[[File:Cable 38c.jpg|centre|thumb|200x200px]]
|HI-LO / HiPass
|AUDIO
|Cuts low frequencies and passes high frequencies.
Use to balance / cut out unwanted noise.
|-
|X-PRESE
|[[File:Cable 38d.jpg|centre|thumb|200x200px]]
|Phase
|AUDIO
|Takes a signal and puts it 180º out of phase.
Use to invert an electrical signal.
|-
|X-RESPON
|[[File:Cable 38e.jpg|centre|thumb|200x200px]]
|Response Shaper
|AUDIO
|Cuts frequencies at 5k. Use this to balance / cut
out unwanted noise.
|-
|XPEM-XM
|[[File:Cable 39.jpg|centre|thumb|200x200px]]
|XLR MALE -
1/4" MALE
|AUDIO
|This cable is designed to connect gear with balanced
phone outputs to gear with XLR inputs. It is ideal for

use in a variety of audio applications.
|-
|XPEM-XF
|[[File:Cable 40.jpg|centre|thumb|200x200px]]
|XLR FEMALE -
1/4" MALE
|AUDIO
|This cable is designed to connect gear with balanced
phone outputs to gear with XLR inputs. It is ideal for

use in a variety of audio applications.
|-
|YPEM-XM
|[[File:Cable 41.jpg|centre|thumb|200x200px]]
|XLR MALE -
1/4" MALE Y
|AUDIO
|This cable is perfect for connecting microphones with
1/4 inch jack to cameras, camcorders, or other

professional audio equipments with XLR connector.

Suitable for mic, mixer, amplifier, home theater and

other environments.
|-
|YPEM-XF
|[[File:Cable 42.jpg|centre|thumb|200x200px]]
|XLR FEMALE -
1/4" MALE Y
|AUDIO
|This cable is perfect for connecting microphones with
1/4 inch jack to cameras, camcorders, or other

professional audio equipments with XLR connector.

Suitable for mic, mixer, amplifier, home theater and

other environments.
|-
|X-XM-XM
|[[File:Cable 43.jpg|centre|thumb|200x200px]]
|XLR MALE -
XLR MALE
|AUDIO
|Designed to change an XLR input into an XLR output.
|-
|X-XF-XF
|[[File:Cable 44.jpg|centre|thumb|200x200px]]
|XLR FEMALE -
XLR FEMALE
|AUDIO
|Designed to change an XLR output into an XLR input.
|-
|Y-XF-XM
|[[File:Cable 45.jpg|centre|thumb|200x200px]]
|XLR MALE -
XLR FEMALE Y
|AUDIO
|This cable is designed to connect two XLR outputs
to one XLR input. It may be used to connect two

microphones to one channel on a mixing console

when a second channel is unavailable.
|-
|Y-XM-XF
|[[File:Cable 46.jpg|centre|thumb|200x200px]]
|XLR FEMALE -
XLR MALE Y
|AUDIO
|This Y-cable is designed to connect an XLR output
to two XLR inputs. It is ideal for assigning the signal

from a microphone to two channels on a mixing console.
|}
[[Category:Media Loan]]

Cables and Adapters Catalog

2018-08-30T21:54:59Z

Medialoan10:

{| class="wikitable" background: LightYellow; "
!TESC
SKU
!IMAGE
!TYPE
!AUDIO/
VIDEO
!USAGE
|-
|XMM-MF
|[[File:Cable 1.jpg|centre|thumb|200x200px]]
|MINI MALE -
MINI FEMALE
|AUDIO
|Extension cable for microphones,
headphones, smartphones, tablets, or

other media players.
|-
|XMF-MF
|[[File:Cable 2.jpg|centre|thumb|200x200px]]
|MINI FEMALE -
MINI FEMALE
|AUDIO
|Extension cable for microphones,

headphones, smartphones, tablets, or

other media players.
|-
|X-MM-MM
|[[File:Cable 3.jpg|centre|thumb|200x200px]]
|MINI MALE -
MINI MALE
|AUDIO
|Extension cable for microphones,

headphones, smartphones, tablets, or

other media players.
|-
|Y-MM-MF
|[[File:Cable 4.jpg|centre|thumb|200x200px]]
|MINI MALE -
MINI FEMALE Y
|AUDIO
|Extension cable for microphones,

headphones, smartphones, tablets, or

other media players.
|-
|XPOFPOM
|[[File:Cable 5.jpg|centre|thumb|200x200px]]
|RCA MALE -
RCA FEMALE
|AUDIO/
VIDEO
|Adaptor to extend the length of

your mono cable, subwoofer cable,

digital audio cable or video cable whilst

maintaining an optimized connection.
|-
|YPOMPOM
|[[File:Cable 6.jpg|centre|thumb|200x200px]]
|RCA MALE -
RCA MALE Y
|AUDIO/
VIDEO
|Ideal for home-entertainment and
high-fidelity (HiFi) systems. The split RCA

on one end allows you to connect to

multiple devices.
|-
|XMM-POM
|[[File:Cable 7.jpg|centre|thumb|200x200px]]
|RCA MALE -
MINI MALE
|AUDIO
|Adapter cable connects a smartphone,
tablet, or MP3 player to a speaker,

stereo receiver, or other RCA-enabled device.
|-
|XMF-POF
|[[File:Cable 8.jpg|centre|thumb|200x200px]]
|RCA MALE -
MINI FEMALE
|AUDIO
|This cable adapter allows you to plug a
separate ⅛” cable into this adapter and

then connect to RCA auxiliary inputs on

your sound system or other device.
|-
|YPOM-MM
|[[File:Cable 9.jpg|centre|thumb|200x200px]]
|RCA MALE Y -

MINI MALE
|AUDIO
|Adapter cable connects various audio

devices with various kinds of stereo players.
|-
|YPOF-MM
|[[File:Cable 10.jpg|centre|thumb|200x200px]]
|RCA FEMALE Y -
MINI MALE
|AUDIO
|This adaptor is for converting sound from
a computer or any other source that outputs

a ⅛” connector to a receiver, amp, or any

device that uses a stereo RCA input.
|-
|YPOMPOF
|[[File:Cable 11.jpg|centre|thumb|200x200px]]
|RCA FEMALE -
RCA MALE Y
|AUDIO/
VIDEO
|Adaptor or extension to a split RCA cable.
Convert the signal from dual RCA jacks

(stereo) to a single RCA jack (mono)
|-
|YPOFPOM
|[[File:Cable 12.jpg|centre|thumb|200x200px]]
|RCA FEMALE Y -
RCA MALE
|AUDIO/
VIDEO
|Split RCA cable to single. Use to split any
RCA jack into two jacks.
|-
|XPOMPOM
|[[File:Cable 14.jpg|centre|thumb|200x200px]]
|RCA MALE -
RCA MALE

(MONO)
|AUDIO
|For single channel audio to many
devices. (mono)
|-
|ZPOMPOM
|[[File:Cable 15.jpg|centre|thumb|200x200px]]
|RCA MALE -
RCA MALE

(STEREO)
|AUDIO
|For connecting stereo speakers or other
audio devices. (stereo)
|-
|VPOMPOM
|[[File:Cable 16.jpg|centre|thumb|200x200px]]
|RCA MALE -
RCA MALE

A/V
|AUDIO/
VIDEO
|For connecting audio and video to a
TV or similar devices.
|-
|XPEMPOM
|[[File:Cable 17.jpg|centre|thumb|200x200px]]
|1/4" MALE -
RCA MALE
|AUDIO
|Connects audio devices with the ¼” Male
to RCA for amplifiers, Hi Fi stereo audio

system, speakers, recording equipment,

home theater system etc.
|-
|YPOFPEM
|[[File:Cable 18.jpg|centre|thumb|200x200px]]
|1/4" MALE -
RCA FEMALE Y
|AUDIO
|This cable is designed to split a stereo signal.
|-
|YPEFPOF
|[[File:Cable 19.jpg|centre|thumb|200x200px]]
|1/4" FEMALE -
RCA FEMALE Y
|AUDIO
|These cables allow you to interface between
¼” Stereo and split RCA, so you can connect

between speakers and audio devices that

don't both have the same connection types.
|-
|YPEFPOF
|[[File:Cable 20.jpg|centre|thumb|200x200px]]
|1/4" FEMALE Y -

RCA FEMALE
|AUDIO
|This cable adaptor is used for connecting a

1/4 “ cable to a RCA cable, used for splitting

to multiple inputs.
|-
|XPEFPEF
|[[File:Cable 21.jpg|centre|thumb|200x200px]]
|1/4" FEMALE -
1/4" FEMALE
|AUDIO
|This adaptor is designed to couple cables
with phone plugs. It works with mono or

stereo plugs.
|-
|X-MM-PEF
|[[File:Cable 22.jpg|centre|thumb|200x200px]]
|1/4" FEMALE -
MINI MALE
|AUDIO
|These cables convert a large stereo 1/4" to
a small stereo 1/8" mini male.
|-
|YMM-PEM
|[[File:Cable 23.jpg|centre|thumb|200x200px]]
|1/4" MALE Y -
MINI MALE
|AUDIO
|Connects your laptop, iPhone,
or iPod with a ⅛” jack output with an AV

receiver, amplifier, mixer, Hi-Fi stereo

audio system, recording equipment,

or speakers with dual ¼” jack inputs.
|-
|XPOF-XF
|[[File:Cable 24.jpg|centre|thumb|200x200px]]
|XLR FEMALE -
RCA FEMALE
|AUDIO
|Can be used to plug your mixer's XLR line
outputs into a standalone recorder's RCA

inputs, as well as other dives with the same

outputs/inputs.
|-
|XPOM-XF
|[[File:Cable 25.jpg|centre|thumb|200x200px]]
|XLR FEMALE -
RCA MALE
|AUDIO
|This cable converts a balanced audio signal
into an unbalanced signal. This is good for

sending audio signals from an XLR source

to an RCA input or vice versa.
|-
|XPOM-XM
|[[File:Cable 26.jpg|centre|thumb|200x200px]]
|XLR MALE -

RCA MALE
|AUDIO
|This cable converts a balanced audio signal

into an unbalanced signal. This is good for

sending audio signals from an XLR source

to an RCA input or vice versa.
|-
|XPOF-XM
|[[File:Cable 27.jpg|centre|thumb|200x200px]]
|XLR MALE -
RCA FEMALE
|AUDIO
|This cable converts a balanced audio signal
into an unbalanced signal. This is good for

sending audio signals from an XLR source

to an RCA input or vice versa.
|-
|YPEFPEM
|[[File:Cable 28.jpg|centre|thumb|200x200px]]
|1/4" MALE -
1/4" FEMALE Y
|AUDIO
|For extending a ¼” male cable into a
dual ¼” female cable.
|-
|YPEMPOM
|[[File:Cable 29.jpg|centre|thumb|200x200px]]
|1/4" MALE -
RCA MALE Y
|AUDIO
|Connects audio devices with the ¼” Male
to Dual RCA for amplifiers, Hi Fi stereo

audio system, speakers, recording

equipment, home theater system etc.
|-
|XPEMPEM
|[[File:Cable 30.jpg|centre|thumb|200x200px]]
|1/4" MALE -
1/4" MALE
|AUDIO
|The audio cable male to male connectors
are compatible with microphones, musical

instruments, guitars, amplifiers, audio

consoles, mixer audio, and much more.
|-
|XPEFPEM
|[[File:Cable 31.jpg|centre|thumb|200x200px]]
|1/4" MALE -
1/4" FEMALE
|AUDIO
|This audio cable is an extension cable
for a male to male ¼” cable.
|-
|X-MF-XM
|[[File:Cable 32.jpg|centre|thumb|200x200px]]
|XLR MALE -
MINI FEMALE
|AUDIO
|This ⅛” to XLR cable connects
devices with an ⅛” jack, such as

Phones, iPod, MP3 player, tablet,

laptop, or voice recorder, to a

mixing console or speaker.
|-
|YPOF-MM
|[[File:Cable 33.jpg|centre|thumb|200x200px]]
|XLR FEMALE -
MINI MALE STEREO
|AUDIO
|This cable connects a professional
mic to a camera, computer, recorder,

or any compatible device.
|-
|X-MF-XF
|[[File:Cable 34.jpg|centre|thumb|200x200px]]
|XLR FEMALE -
MINI FEMALE
|AUDIO
|This mini ⅛” female to XLR female
cable can be used to connect the

stereo output of an audio device

to a single XLR line input on a

mixing console.
|-
|X-MM-XF
|[[File:Cable 35.jpg|centre|thumb|200x200px]]
|XLR FEMALE -
MINI MALE MONO
|AUDIO
|This cable can be used with a
microphone cable, monitor speakers,

audio interfaces, PA applications

and more.
|-
|X-XF-XF
|[[File:Cable 36.jpg|centre|thumb|200x200px]]
|(BARREL)
XLR FEMALE -

XLR MALE
|AUDIO
|Designed to eliminate interference
associated with ground loops.
|-
|XPEM-XF
|[[File:Cable 37.jpg|centre|thumb|200x200px]]
|(BARREL)
XLR FEMALE -

1/4" MALE
|AUDIO
|This adapter maintains the balanced
nature of the signal and is useful

for line level signals requiring connector

changes.
|-
|X-BRIDG
|[[File:Cable 38a.jpg|centre|thumb|200x200px]]
|Bridging Transformer
|AUDIO
|Balanced low impedance to high
impedance matching transformer.

Use for transmitting a low impedance

source to a high impedance source.
|-
|X-LOPAS
|[[File:Cable 38b.jpg|centre|thumb|200x200px]]
|Line Pad / LoPass
|AUDIO
|Passes low frequencies and cuts
high frequencies. Use to balance / cut

out unwanted noise.
|-
|X-HIPAS
|[[File:Cable 38c.jpg|centre|thumb|200x200px]]
|HI-LO / HiPass
|AUDIO
|Cuts low frequencies and passes
high frequencies. Use to balance /

cut out unwanted noise.
|-
|X-PRESE
|[[File:Cable 38d.jpg|centre|thumb|200x200px]]
|Phase
|AUDIO
|Takes a signal and puts it 180º out
of phase. Use to invert an electrical

signal.
|-
|X-RESPON
|[[File:Cable 38e.jpg|centre|thumb|200x200px]]
|Response Shaper
|AUDIO
|Cuts frequencies at 5k. Use this to
balance / cut out unwanted noise.
|-
|XPEM-XM
|[[File:Cable 39.jpg|centre|thumb|200x200px]]
|XLR MALE -
1/4" MALE
|AUDIO
|This cable is designed to connect
gear with balanced phone outputs

to gear with XLR inputs. It is ideal

for use in a variety of audio

applications.
|-
|XPEM-XF
|[[File:Cable 40.jpg|centre|thumb|200x200px]]
|XLR FEMALE -
1/4" MALE
|AUDIO
|This cable is designed to connect
gear with balanced phone outputs to

gear with XLR inputs. It is ideal for

use in a variety of audio applications.
|-
|YPEM-XM
|[[File:Cable 41.jpg|centre|thumb|200x200px]]
|XLR MALE -
1/4" MALE Y
|AUDIO
|This cable is perfect for connecting
microphones with 1/4 inch jack to

cameras, camcorders, or other

professional audio equipments with

XLR connector. Suitable for mic, mixer,

amplifier, home theater and other

environments.
|-
|YPEM-XF
|[[File:Cable 42.jpg|centre|thumb|200x200px]]
|XLR FEMALE -
1/4" MALE Y
|AUDIO
|This cable is perfect for connecting
microphones with 1/4 inch jack to

cameras, camcorders, or other

professional audio equipments with

XLR connector. Suitable for mic, mixer,

amplifier, home theater and other

environments.
|-
|X-XM-XM
|[[File:Cable 43.jpg|centre|thumb|200x200px]]
|XLR MALE -
XLR MALE
|AUDIO
|Designed to change an XLR input
into an XLR output.
|-
|X-XF-XF
|[[File:Cable 44.jpg|centre|thumb|200x200px]]
|XLR FEMALE -
XLR FEMALE
|AUDIO
|Designed to change an XLR output
into an XLR input.
|-
|Y-XF-XM
|[[File:Cable 45.jpg|centre|thumb|200x200px]]
|XLR MALE -
XLR FEMALE Y
|AUDIO
|This cable is designed to connect two
XLR outputs to one XLR input. It may be

used to connect two microphones to one

channel on a mixing console when a second

channel is unavailable.
|-
|Y-XM-XF
|[[File:Cable 46.jpg|centre|thumb|200x200px]]
|XLR FEMALE -
XLR MALE Y
|AUDIO
|This Y-cable is designed to connect
an XLR output to two XLR inputs. It is

ideal for assigning the signal from a

microphone to two channels on a

mixing console.
|}
[[Category:Media Loan]]

Cables and Adapters Catalog

2018-08-30T21:54:02Z

Medialoan10:

{| class="wikitable" background: LightYellow; "
!TESC
SKU
!IMAGE
!TYPE
!AUDIO/
VIDEO
!USAGE
|-
|XMM-MF
|[[File:Cable 1.jpg|centre|thumb|200x200px]]
|MINI MALE -
MINI FEMALE
|AUDIO
|Extension cable for microphones,
headphones, smartphones, tablets, or

other media players.
|-
|XMF-MF
|[[File:Cable 2.jpg|centre|thumb|200x200px]]
|MINI FEMALE -
MINI FEMALE
|AUDIO
|Extension cable for microphones,

headphones, smartphones, tablets, or

other media players.
|-
|X-MM-MM
|[[File:Cable 3.jpg|centre|thumb|200x200px]]
|MINI MALE -
MINI MALE
|AUDIO
|Extension cable for microphones,

headphones, smartphones, tablets, or

other media players.
|-
|Y-MM-MF
|[[File:Cable 4.jpg|centre|thumb|200x200px]]
|MINI MALE -
MINI FEMALE Y
|AUDIO
|Extension cable for microphones,

headphones, smartphones, tablets, or

other media players.
|-
|XPOFPOM
|[[File:Cable 5.jpg|centre|thumb|200x200px]]
|RCA MALE -
RCA FEMALE
|AUDIO/
VIDEO
|Adaptor to extend the length of

your mono cable, subwoofer cable,

digital audio cable or video cable whilst

maintaining an optimized connection.
|-
|YPOMPOM
|[[File:Cable 6.jpg|centre|thumb|200x200px]]
|RCA MALE -
RCA MALE Y
|AUDIO/
VIDEO
|Ideal for home-entertainment and
high-fidelity (HiFi) systems. The split RCA

on one end allows you to connect to

multiple devices.
|-
|XMM-POM
|[[File:Cable 7.jpg|centre|thumb|200x200px]]
|RCA MALE -
MINI MALE
|AUDIO
|Adapter cable connects a smartphone,
tablet, or MP3 player to a speaker,

stereo receiver, or other RCA-enabled device.
|-
|XMF-POF
|[[File:Cable 8.jpg|centre|thumb|200x200px]]
|RCA MALE -
MINI FEMALE
|AUDIO
|This cable adapter allows you to plug a
separate ⅛” cable into this adapter and

then connect to RCA auxiliary inputs on

your sound system or other device.
|-
|YPOM-MM
|[[File:Cable 9.jpg|centre|thumb|200x200px]]
|RCA MALE Y -

MINI MALE
|AUDIO
|Adapter cable connects various audio

devices with various kinds of stereo players.
|-
|YPOF-MM
|[[File:Cable 10.jpg|centre|thumb|200x200px]]
|RCA FEMALE Y -
MINI MALE
|AUDIO
|This adaptor is for converting sound from
a computer or any other source that outputs

a ⅛” connector to a receiver, amp, or any

device that uses a stereo RCA input.
|-
|YPOMPOF
|[[File:Cable 11.jpg|centre|thumb|200x200px]]
|RCA FEMALE -
RCA MALE Y
|AUDIO/
VIDEO
|Adaptor or extension to a split RCA cable.
Convert the signal from dual RCA jacks

(stereo) to a single RCA jack (mono)
|-
|YPOFPOM
|[[File:Cable 12.jpg|centre|thumb|200x200px]]
|RCA FEMALE Y -
RCA MALE
|AUDIO/
VIDEO
|Split RCA cable to single. Use to split any
RCA jack into two jacks.
|-
|XPOMPOM
|[[File:Cable 14.jpg|centre|thumb|200x200px]]
|RCA MALE -
RCA MALE

(MONO)
|AUDIO
|For single channel audio to many
devices. (mono)
|-
|ZPOMPOM
|[[File:Cable 15.jpg|centre|thumb|200x200px]]
|RCA MALE -
RCA MALE

(STEREO)
|AUDIO
|For connecting stereo speakers or other
audio devices. (stereo)
|-
|VPOMPOM
|[[File:Cable 16.jpg|centre|thumb|200x200px]]
|RCA MALE -
RCA MALE

A/V
|AUDIO/
VIDEO
|For connecting audio and video to a
TV or similar devices.
|-
|XPEMPOM
|[[File:Cable 17.jpg|centre|thumb|200x200px]]
|1/4" MALE -
RCA MALE
|AUDIO
|Connects audio devices with the ¼” Male
to RCA for amplifiers, Hi Fi stereo audio

system, speakers, recording equipment,

home theater system etc.
|-
|YPOFPEM
|[[File:Cable 18.jpg|centre|thumb|200x200px]]
|1/4" MALE -
RCA FEMALE Y
|AUDIO
|This cable is designed to split a stereo signal.
|-
|YPEFPOF
|[[File:Cable 19.jpg|centre|thumb|200x200px]]
|1/4" FEMALE -
RCA FEMALE Y
|AUDIO
|These cables allow you to interface between
¼” Stereo and split RCA, so you can connect

between speakers and audio devices that

don't both have the same connection types.
|-
|YPEFPOF
|[[File:Cable 20.jpg|centre|thumb|200x200px]]
|1/4" FEMALE Y -

RCA FEMALE
|AUDIO
|This cable adaptor is used for connecting a

1/4 “ cable to a RCA cable, used for splitting

to multiple inputs.
|-
|XPEFPEF
|[[File:Cable 21.jpg|centre|thumb|200x200px]]
|1/4" FEMALE -
1/4" FEMALE
|AUDIO
|This adaptor is designed to couple cables
with phone plugs. It works with mono or

stereo plugs.
|-
|X-MM-PEF
|[[File:Cable 22.jpg|centre|thumb|200x200px]]
|1/4" FEMALE -
MINI MALE
|AUDIO
|These cables convert a large stereo 1/4" to
a small stereo 1/8" mini male.
|-
|YMM-PEM
|[[File:Cable 23.jpg|centre|thumb|200x200px]]
|1/4" MALE Y -
MINI MALE
|AUDIO
|Connects your laptop, iPhone,
or iPod with a ⅛” jack output with an AV

receiver, amplifier, mixer, Hi-Fi stereo

audio system, recording equipment,

or speakers with dual ¼” jack inputs.
|-
|XPOF-XF
|[[File:Cable 24.jpg|centre|thumb|200x200px]]
|XLR FEMALE -
RCA FEMALE
|AUDIO
|Can be used to plug your mixer's XLR line
outputs into a standalone recorder's RCA

inputs, as well as other dives with the same

outputs/inputs.
|-
|XPOM-XF
|[[File:Cable 25.jpg|centre|thumb|200x200px]]
|XLR FEMALE -
RCA MALE
|AUDIO
|This cable converts a balanced audio signal
into an unbalanced signal. This is good for

sending audio signals from an XLR source

to an RCA input or vice versa.
|-
|XPOM-XM
|[[File:Cable 26.jpg|centre|thumb|200x200px]]
|XLR MALE -

RCA MALE
|AUDIO
|This cable converts a balanced audio signal

into an unbalanced signal. This is good for

sending audio signals from an XLR source

to an RCA input or vice versa.
|-
|XPOF-XM
|[[File:Cable 27.jpg|centre|thumb|200x200px]]
|XLR MALE -
RCA FEMALE
|AUDIO
|This cable converts a balanced audio signal
into an unbalanced signal. This is good for

sending audio signals from an XLR source

to an RCA input or vice versa.
|-
|YPEFPEM
|[[File:Cable 28.jpg|centre|thumb|200x200px]]
|1/4" MALE -
1/4" FEMALE Y
|AUDIO
|For extending a ¼” male cable into a
dual ¼” female cable.
|-
|YPEMPOM
|[[File:Cable 29.jpg|centre|thumb|200x200px]]
|1/4" MALE -
RCA MALE Y
|AUDIO
|Connects audio devices with the ¼” Male
to Dual RCA for amplifiers, Hi Fi stereo

audio system, speakers, recording

equipment, home theater system etc.
|-
|XPEMPEM
|[[File:Cable 30.jpg|centre|thumb|200x200px]]
|1/4" MALE -
1/4" MALE
|AUDIO
|The audio cable male to male connectors
are compatible with microphones, musical

instruments, guitars, amplifiers, audio

consoles, mixer audio, and much more.
|-
|XPEFPEM
|[[File:Cable 31.jpg|centre|thumb|200x200px]]
|1/4" MALE -
1/4" FEMALE
|AUDIO
|This audio cable is an extension cable
for a male to male ¼” cable.
|-
|X-MF-XM
|[[File:Cable 32.jpg|centre|thumb|200x200px]]
|XLR MALE -
MINI FEMALE
|AUDIO
|This ⅛” to XLR cable connects
devices with an ⅛” jack, such as

Phones, iPod, MP3 player, tablet,

laptop, or voice recorder, to a

mixing console or speaker.
|-
|YPOF-MM
|[[File:Cable 33.jpg|centre|thumb|200x200px]]
|XLR FEMALE -
MINI MALE STEREO
|AUDIO
|This cable connects a professional
mic to a camera, computer, recorder,

or any compatible device.
|-
|X-MF-XF
|[[File:Cable 34.jpg|centre|thumb|200x200px]]
|XLR FEMALE -
MINI FEMALE
|AUDIO
|This mini ⅛” female to XLR female
cable can be used to connect the

stereo output of an audio device

to a single XLR line input on a

mixing console.
|-
|X-MM-XF
|[[File:Cable 35.jpg|centre|thumb|200x200px]]
|XLR FEMALE -
MINI MALE MONO
|AUDIO
|This cable can be used with a
microphone cable, monitor speakers,

audio interfaces, PA applications

and more.
|-
|X-XF-XF
|[[File:Cable 36.jpg|centre|thumb|200x200px]]
|(BARREL)
XLR FEMALE -

XLR MALE
|AUDIO
|Designed to eliminate interference
associated with ground loops.
|-
|XPEM-XF
|[[File:Cable 37.jpg|centre|thumb|200x200px]]
|(BARREL)
XLR FEMALE -

1/4" MALE
|AUDIO
|This adapter maintains the balanced
nature of the signal and is useful

for line level signals requiring connector

changes.
|-
|X-BRIDG
|[[File:Cable 38a.jpg|centre|thumb|200x200px]]
|Bridging Transformer
|AUDIO
|Balanced low impedance to high
impedance matching transformer.

Use for transmitting a low impedance

source to a high impedance source.
|-
|X-LOPAS
|[[File:Cable 38b.jpg|centre|thumb|200x200px]]
|Line Pad / LoPass
|AUDIO
|Passes low frequencies and cuts
high frequencies. Use to balance / cut

out unwanted noise.
|-
|X-HIPAS
|[[File:Cable 38c.jpg|centre|thumb|200x200px]]
|HI-LO / HiPass
|AUDIO
|Cuts low frequencies and passes
high frequencies. Use to balance /

cut out unwanted noise.
|-
|X-PRESE
|[[File:Cable 38d.jpg|centre|thumb|200x200px]]
|Phase
|AUDIO
|Takes a signal and puts it 180º out
of phase. Use to invert an electrical

signal.
|-
|X-RESPON
|[[File:Cable 38e.jpg|centre|thumb|200x200px]]
|Response Shaper
|AUDIO
|Cuts frequencies at 5k. Use this to
balance / cut out unwanted noise.
|-
|XPEM-XM
|[[File:Cable 39.jpg|centre|thumb|200x200px]]
|XLR MALE -
1/4" MALE
|AUDIO
|This cable is designed to connect
gear with balanced phone outputs

to gear with XLR inputs. It is ideal

for use in a variety of audio

applications.
|-
|XPEM-XF
|[[File:Cable 40.jpg|centre|thumb|200x200px]]
|XLR FEMALE -
1/4" MALE
|AUDIO
|This cable is designed to connect
gear with balanced phone outputs to

gear with XLR inputs. It is ideal for

use in a variety of audio applications.
|-
|YPEM-XM
|[[File:Cable 41.jpg|centre|thumb|200x200px]]
|XLR MALE -
1/4" MALE Y
|AUDIO
|This cable is perfect for connecting
microphones with 1/4 inch jack to

cameras, camcorders, or other

professional audio equipments with

XLR connector. Suitable for mic, mixer,

amplifier, home theater and other

environments.
|-
|YPEM-XF
|[[File:Cable 42.jpg|centre|thumb|200x200px]]
|XLR FEMALE -
1/4" MALE Y
|AUDIO
|This cable is perfect for connecting
microphones with 1/4 inch jack to

cameras, camcorders, or other

professional audio equipments with

XLR connector. Suitable for mic, mixer,

amplifier, home theater and other

environments.
|-
|X-XM-XM
|[[File:Cable 43.jpg|centre|thumb|200x200px]]
|XLR MALE -
XLR MALE
|AUDIO
|Designed to change an XLR input
into an XLR output.
|-
|X-XF-XF
|[[File:Cable 44.jpg|centre|thumb|200x200px]]
|XLR FEMALE -
XLR FEMALE
|AUDIO
|Designed to change an XLR output
into an XLR input.
|-
|Y-XF-XM
|[[File:Cable 45.jpg|centre|thumb|200x200px]]
|XLR MALE -
XLR FEMALE Y
|AUDIO
|This cable is designed to connect two
XLR outputs to one XLR input. It may be

used to connect two microphones to one

channel on a mixing console when a second

channel is unavailable.
|-
|Y-XM-XF
|[[File:Cable 46.jpg|centre|thumb|200x200px]]
|XLR FEMALE -
XLR MALE Y
|AUDIO
|This Y-cable is designed to connect
an XLR output to two XLR inputs. It is

ideal for assigning the signal from a

microphone to two channels on a

mixing console.
|}
[[Category:Media Loan]]

Cables and Adapters Catalog

2018-08-30T21:52:27Z

Medialoan10:

{| class="wikitable" background: LightYellow; "
!TESC
SKU
!IMAGE
!TYPE
!AUDIO/
VIDEO
!USAGE
|-
|XMM-MF
|[[File:Cable 1.jpg|centre|thumb|200x200px]]
|MINI MALE -
MINI FEMALE
|AUDIO
|Extension cable for microphones,
headphones, smartphones, tablets, or

other media players.
|-
|XMF-MF
|[[File:Cable 2.jpg|centre|thumb|200x200px]]
|MINI FEMALE -
MINI FEMALE
|AUDIO
|Extension cable for microphones,

headphones, smartphones, tablets, or

other media players.
|-
|X-MM-MM
|[[File:Cable 3.jpg|centre|thumb|200x200px]]
|MINI MALE -
MINI MALE
|AUDIO
|Extension cable for microphones,

headphones, smartphones, tablets, or

other media players.
|-
|Y-MM-MF
|[[File:Cable 4.jpg|centre|thumb|200x200px]]
|MINI MALE -
MINI FEMALE Y
|AUDIO
|Extension cable for microphones,

headphones, smartphones, tablets, or

other media players.
|-
|XPOFPOM
|[[File:Cable 5.jpg|centre|thumb|200x200px]]
|RCA MALE -
RCA FEMALE
|AUDIO/
VIDEO
|Adaptor to extend the length of

your mono cable, subwoofer cable,

digital audio cable or video cable whilst

maintaining an optimized connection.
|-
|YPOMPOM
|[[File:Cable 6.jpg|centre|thumb|200x200px]]
|RCA MALE -
RCA MALE Y
|AUDIO/
VIDEO
|Ideal for home-entertainment and
high-fidelity (HiFi) systems. The split RCA

on one end allows you to connect to

multiple devices.
|-
|XMM-POM
|[[File:Cable 7.jpg|centre|thumb|200x200px]]
|RCA MALE -
MINI MALE
|AUDIO
|Adapter cable connects a smartphone,
tablet, or MP3 player to a speaker,

stereo receiver, or other RCA-enabled device.
|-
|XMF-POF
|[[File:Cable 8.jpg|centre|thumb|200x200px]]
|RCA MALE -
MINI FEMALE
|AUDIO
|This cable adapter allows you to plug a
separate ⅛” cable into this adapter and

then connect to RCA auxiliary inputs on

your sound system or other device.
|-
|YPOM-MM
|[[File:Cable 9.jpg|centre|thumb|200x200px]]
|RCA MALE Y -

MINI MALE
|AUDIO
|Adapter cable connects various audio

devices with various kinds of stereo players.
|-
|YPOF-MM
|[[File:Cable 10.jpg|centre|thumb|200x200px]]
|RCA FEMALE Y -
MINI MALE
|AUDIO
|This adaptor is for converting sound from
a computer or any other source that outputs

a ⅛” connector to a receiver, amp, or any

device that uses a stereo RCA input.
|-
|YPOMPOF
|[[File:Cable 11.jpg|centre|thumb|200x200px]]
|RCA FEMALE -
RCA MALE Y
|AUDIO/
VIDEO
|Adaptor or extension to a split RCA cable.
Convert the signal from dual RCA jacks

(stereo) to a single RCA jack (mono)
|-
|YPOFPOM
|[[File:Cable 12.jpg|centre|thumb|200x200px]]
|RCA FEMALE Y -
RCA MALE
|AUDIO/
VIDEO
|Split RCA cable to single. Use to split any
RCA jack into two jacks.
|-
|XPOMPOM
|[[File:Cable 14.jpg|centre|thumb|200x200px]]
|RCA MALE -
RCA MALE

(MONO)
|AUDIO
|For single channel audio to many
devices. (mono)
|-
|ZPOMPOM
|[[File:Cable 15.jpg|centre|thumb|200x200px]]
|RCA MALE -
RCA MALE

(STEREO)
|AUDIO
|For connecting stereo speakers or other
audio devices. (stereo)
|-
|VPOMPOM
|[[File:Cable 16.jpg|centre|thumb|200x200px]]
|RCA MALE -
RCA MALE

A/V
|AUDIO/
VIDEO
|For connecting audio and video to a
TV or similar devices.
|-
|XPEMPOM
|[[File:Cable 17.jpg|centre|thumb|200x200px]]
|1/4" MALE -
RCA MALE
|AUDIO
|Connects audio devices with the ¼” Male
to RCA for amplifiers, Hi Fi stereo audio

system, speakers, recording equipment,

home theater system etc.
|-
|YPOFPEM
|[[File:Cable 18.jpg|centre|thumb|200x200px]]
|1/4" MALE -
RCA FEMALE Y
|AUDIO
|This cable is designed to split a stereo signal.
|-
|YPEFPOF
|[[File:Cable 19.jpg|centre|thumb|200x200px]]
|1/4" FEMALE -
RCA FEMALE Y
|AUDIO
|These cables allow you to interface between
¼” Stereo and split RCA, so you can connect

between speakers and audio devices that

don't both have the same connection types.
|-
|YPEFPOF
|[[File:Cable 20.jpg|centre|thumb|200x200px]]
|1/4" FEMALE Y -

RCA FEMALE
|AUDIO
|This cable adaptor is used for connecting a

1/4 “ cable to a RCA cable, used for splitting

to multiple inputs.
|-
|XPEFPEF
|[[File:Cable 21.jpg|centre|thumb|200x200px]]
|1/4" FEMALE -
1/4" FEMALE
|AUDIO
|This adaptor is designed to couple cables
with phone plugs. It works with mono or

stereo plugs.
|-
|X-MM-PEF
|[[File:Cable 22.jpg|centre|thumb|200x200px]]
|1/4" FEMALE -
MINI MALE
|AUDIO
|These cables convert a large stereo 1/4" to
a small stereo 1/8" mini male.
|-
|YMM-PEM
|[[File:Cable 23.jpg|centre|thumb|200x200px]]
|1/4" MALE Y -
MINI MALE
|AUDIO
|Connects your laptop, iPhone,
or iPod with a ⅛” jack output with an AV receiver,

amplifier, mixer, Hi-Fi stereo audio system,

recording equipment, or speakers with

dual ¼” jack inputs.
|-
|XPOF-XF
|[[File:Cable 24.jpg|centre|thumb|200x200px]]
|XLR FEMALE -
RCA FEMALE
|AUDIO
|Can be used to plug your mixer's XLR line
outputs into a standalone recorder's RCA

inputs, as well as other dives with the same outputs/inputs.
|-
|XPOM-XF
|[[File:Cable 25.jpg|centre|thumb|200x200px]]
|XLR FEMALE -
RCA MALE
|AUDIO
|This cable converts a balanced audio signal
into an unbalanced signal. This is good for

sending audio signals from an XLR source

to an RCA input or vice versa.
|-
|XPOM-XM
|[[File:Cable 26.jpg|centre|thumb|200x200px]]
|XLR MALE -

RCA MALE
|AUDIO
|This cable converts a balanced audio signal

into an unbalanced signal. This is good for

sending audio signals from an XLR source

to an RCA input or vice versa.
|-
|XPOF-XM
|[[File:Cable 27.jpg|centre|thumb|200x200px]]
|XLR MALE -
RCA FEMALE
|AUDIO
|This cable converts a balanced audio signal
into an unbalanced signal. This is good for

sending audio signals from an XLR source

to an RCA input or vice versa.
|-
|YPEFPEM
|[[File:Cable 28.jpg|centre|thumb|200x200px]]
|1/4" MALE -
1/4" FEMALE Y
|AUDIO
|For extending a ¼” male cable into a
dual ¼” female cable.
|-
|YPEMPOM
|[[File:Cable 29.jpg|centre|thumb|200x200px]]
|1/4" MALE -
RCA MALE Y
|AUDIO
|Connects audio devices with the ¼” Male
to Dual RCA for amplifiers, Hi Fi stereo

audio system, speakers, recording

equipment, home theater system etc.
|-
|XPEMPEM
|[[File:Cable 30.jpg|centre|thumb|200x200px]]
|1/4" MALE -
1/4" MALE
|AUDIO
|The audio cable male to male connectors
are compatible with microphones, musical instruments, guitars, amplifiers, audio

consoles, mixer audio, and much more.
|-
|XPEFPEM
|[[File:Cable 31.jpg|centre|thumb|200x200px]]
|1/4" MALE -
1/4" FEMALE
|AUDIO
|This audio cable is an extension cable
for a male to male ¼” cable.
|-
|X-MF-XM
|[[File:Cable 32.jpg|centre|thumb|200x200px]]
|XLR MALE -
MINI FEMALE
|AUDIO
|This ⅛” to XLR cable connects
devices with an ⅛” jack, such as

Phones, iPod, MP3 player, tablet,

laptop, or voice recorder, to a

mixing console or speaker.
|-
|YPOF-MM
|[[File:Cable 33.jpg|centre|thumb|200x200px]]
|XLR FEMALE -
MINI MALE STEREO
|AUDIO
|This cable connects a professional
mic to a camera, computer, recorder,

or any compatible device.
|-
|X-MF-XF
|[[File:Cable 34.jpg|centre|thumb|200x200px]]
|XLR FEMALE -
MINI FEMALE
|AUDIO
|This mini ⅛” female to XLR female
cable can be used to connect the

stereo output of an audio device

to a single XLR line input on a

mixing console.
|-
|X-MM-XF
|[[File:Cable 35.jpg|centre|thumb|200x200px]]
|XLR FEMALE -
MINI MALE MONO
|AUDIO
|This cable can be used with a
microphone cable, monitor speakers,

audio interfaces, PA applications

and more.
|-
|X-XF-XF
|[[File:Cable 36.jpg|centre|thumb|200x200px]]
|(BARREL)
XLR FEMALE -

XLR MALE
|AUDIO
|Designed to eliminate interference
associated with ground loops.
|-
|XPEM-XF
|[[File:Cable 37.jpg|centre|thumb|200x200px]]
|(BARREL)
XLR FEMALE -

1/4" MALE
|AUDIO
|This adapter maintains the balanced
nature of the signal and is useful

for line level signals requiring connector

changes.
|-
|X-BRIDG
|[[File:Cable 38a.jpg|centre|thumb|200x200px]]
|Bridging Transformer
|AUDIO
|Balanced low impedance to high
impedance matching transformer.

Use for transmitting a low impedance

source to a high impedance source.
|-
|X-LOPAS
|[[File:Cable 38b.jpg|centre|thumb|200x200px]]
|Line Pad / LoPass
|AUDIO
|Passes low frequencies and cuts
high frequencies. Use to balance / cut

out unwanted noise.
|-
|X-HIPAS
|[[File:Cable 38c.jpg|centre|thumb|200x200px]]
|HI-LO / HiPass
|AUDIO
|Cuts low frequencies and passes
high frequencies. Use to balance /

cut out unwanted noise.
|-
|X-PRESE
|[[File:Cable 38d.jpg|centre|thumb|200x200px]]
|Phase
|AUDIO
|Takes a signal and puts it 180º out
of phase. Use to invert an electrical

signal.
|-
|X-RESPON
|[[File:Cable 38e.jpg|centre|thumb|200x200px]]
|Response Shaper
|AUDIO
|Cuts frequencies at 5k. Use this to
balance / cut out unwanted noise.
|-
|XPEM-XM
|[[File:Cable 39.jpg|centre|thumb|200x200px]]
|XLR MALE -
1/4" MALE
|AUDIO
|This cable is designed to connect
gear with balanced phone outputs

to gear with XLR inputs. It is ideal

for use in a variety of audio

applications.
|-
|XPEM-XF
|[[File:Cable 40.jpg|centre|thumb|200x200px]]
|XLR FEMALE -
1/4" MALE
|AUDIO
|This cable is designed to connect
gear with balanced phone outputs to

gear with XLR inputs. It is ideal for

use in a variety of audio applications.
|-
|YPEM-XM
|[[File:Cable 41.jpg|centre|thumb|200x200px]]
|XLR MALE -
1/4" MALE Y
|AUDIO
|This cable is perfect for connecting
microphones with 1/4 inch jack to

cameras, camcorders, or other

professional audio equipments with

XLR connector. Suitable for mic, mixer,

amplifier, home theater and other

environments.
|-
|YPEM-XF
|[[File:Cable 42.jpg|centre|thumb|200x200px]]
|XLR FEMALE -
1/4" MALE Y
|AUDIO
|This cable is perfect for connecting
microphones with 1/4 inch jack to

cameras, camcorders, or other

professional audio equipments with

XLR connector. Suitable for mic, mixer,

amplifier, home theater and other

environments.
|-
|X-XM-XM
|[[File:Cable 43.jpg|centre|thumb|200x200px]]
|XLR MALE -
XLR MALE
|AUDIO
|Designed to change an XLR input
into an XLR output.
|-
|X-XF-XF
|[[File:Cable 44.jpg|centre|thumb|200x200px]]
|XLR FEMALE -
XLR FEMALE
|AUDIO
|Designed to change an XLR output
into an XLR input.
|-
|Y-XF-XM
|[[File:Cable 45.jpg|centre|thumb|200x200px]]
|XLR MALE -
XLR FEMALE Y
|AUDIO
|This cable is designed to connect two
XLR outputs to one XLR input. It may be

used to connect two microphones to one

channel on a mixing console when a second channel is unavailable.
|-
|Y-XM-XF
|[[File:Cable 46.jpg|centre|thumb|200x200px]]
|XLR FEMALE -
XLR MALE Y
|AUDIO
|This Y-cable is designed to connect
an XLR output to two XLR inputs. It is

ideal for assigning the signal from a

microphone to two channels on a

mixing console.
|}
[[Category:Media Loan]]

Cables and Adapters Catalog

2018-08-30T21:28:58Z

Medialoan10:

{| class="wikitable" background: LightYellow;"
!TESC
SKU
!IMAGE
!TYPE
!AUDIO/
VIDEO
!USAGE
|-
|XMM-MF
|[[File:Cable 1.jpg|centre|thumb|200x200px]]
|MINI MALE -MINI FEMALE
|AUDIO
|Extension cable for microphones,
headphones, smartphones, tablets, or

other media players.
|-
|XMF-MF
|[[File:Cable 2.jpg|centre|thumb|200x200px]]
|MINI FEMALE -
MINI FEMALE
|AUDIO
|Extension cable for microphones,

headphones, smartphones, tablets, or

other media players.
|-
|X-MM-MM
|[[File:Cable 3.jpg|centre|thumb|200x200px]]
|MINI MALE -
MINI MALE
|AUDIO
|Extension cable for microphones,

headphones, smartphones, tablets, or

other media players.
|-
|Y-MM-MF
|[[File:Cable 4.jpg|centre|thumb|200x200px]]
|MINI MALE -
MINI FEMALE Y
|AUDIO
|Extension cable for microphones,

headphones, smartphones, tablets, or

other media players.
|-
|XPOFPOM
|[[File:Cable 5.jpg|centre|thumb|200x200px]]
|RCA MALE -
RCA FEMALE
|AUDIO/
VIDEO
|Adaptor to extend the length of

your mono cable, subwoofer cable,

digital audio cable or video cable whilst

maintaining an optimized connection.
|-
|YPOMPOM
|[[File:Cable 6.jpg|centre|thumb|200x200px]]
|RCA MALE -
RCA MALE Y
|AUDIO/
VIDEO
|Ideal for home-entertainment and
high-fidelity (HiFi) systems. The split RCA

on one end allows you to connect to

multiple devices.
|-
|XMM-POM
|[[File:Cable 7.jpg|centre|thumb|200x200px]]
|RCA MALE -
MINI MALE
|AUDIO
|Adapter cable connects a smartphone,
tablet, or MP3 player to a speaker,

stereo receiver, or other RCA-enabled device.
|-
|XMF-POF
|[[File:Cable 8.jpg|centre|thumb|200x200px]]
|RCA MALE -
MINI FEMALE
|AUDIO
|This cable adapter allows you to plug a
separate ⅛” cable into this adapter and

then connect to RCA auxiliary inputs on

your sound system or other device.
|-
|YPOM-MM
|[[File:Cable 9.jpg|centre|thumb|200x200px]]
|RCA MALE Y -

MINI MALE
|AUDIO
|Adapter cable connects various audio

devices with various kinds of stereo players.
|-
|YPOF-MM
|[[File:Cable 10.jpg|centre|thumb|200x200px]]
|RCA FEMALE Y -
MINI MALE
|AUDIO
|This adaptor is for converting sound from
a computer or any other source that outputs

a ⅛” connector to a receiver, amp, or any

device that uses a stereo RCA input.
|-
|YPOMPOF
|[[File:Cable 11.jpg|centre|thumb|200x200px]]
|RCA FEMALE -
RCA MALE Y
|AUDIO/
VIDEO
|Adaptor or extension to a split RCA cable.
Convert the signal from dual RCA jacks

(stereo) to a single RCA jack (mono)
|-
|YPOFPOM
|[[File:Cable 12.jpg|centre|thumb|200x200px]]
|RCA FEMALE Y -
RCA MALE
|AUDIO/
VIDEO
|Split RCA cable to single. Use to split any
RCA jack into two jacks.
|-
|XPOMPOM
|[[File:Cable 14.jpg|centre|thumb|200x200px]]
|RCA MALE -
RCA MALE

(MONO)
|AUDIO
|For single channel audio to many
devices. (mono)
|-
|ZPOMPOM
|[[File:Cable 15.jpg|centre|thumb|200x200px]]
|RCA MALE -
RCA MALE

(STEREO)
|AUDIO
|For connecting stereo speakers or other
audio devices. (stereo)
|-
|VPOMPOM
|[[File:Cable 16.jpg|centre|thumb|200x200px]]
|RCA MALE -
RCA MALE

A/V
|AUDIO/
VIDEO
|For connecting audio and video to a
TV or similar devices.
|-
|XPEMPOM
|[[File:Cable 17.jpg|centre|thumb|200x200px]]
|1/4" MALE -
RCA MALE
|AUDIO
|Connects audio devices with the ¼” Male
to RCA for amplifiers, Hi Fi stereo audio

system, speakers, recording equipment,

home theater system etc.
|-
|YPOFPEM
|[[File:Cable 18.jpg|centre|thumb|200x200px]]
|1/4" MALE -
RCA FEMALE Y
|AUDIO
|This cable is designed to split a stereo signal.
|-
|YPEFPOF
|[[File:Cable 19.jpg|centre|thumb|200x200px]]
|1/4" FEMALE -
RCA FEMALE Y
|AUDIO
|These cables allow you to interface between
¼” Stereo and split RCA, so you can connect

between speakers and audio devices that

don't both have the same connection types.
|-
|YPEFPOF
|[[File:Cable 20.jpg|centre|thumb|200x200px]]
|1/4" FEMALE Y -

RCA FEMALE
|AUDIO
|This cable adaptor is used for connecting a

1/4 “ cable to a RCA cable, used for splitting

to multiple inputs.
|-
|XPEFPEF
|[[File:Cable 21.jpg|centre|thumb|200x200px]]
|1/4" FEMALE -
1/4" FEMALE
|AUDIO
|This adaptor is designed to couple cables
with phone plugs. It works with mono or

stereo plugs.
|-
|X-MM-PEF
|[[File:Cable 22.jpg|centre|thumb|200x200px]]
|1/4" FEMALE -
MINI MALE
|AUDIO
|These cables convert a large stereo 1/4" to
a small stereo 1/8" mini male.
|-
|YMM-PEM
|[[File:Cable 23.jpg|centre|thumb|200x200px]]
|1/4" MALE Y -
MINI MALE
|AUDIO
|Connects your laptop, iPhone,
or iPod with a ⅛” jack output with an AV receiver,

amplifier, mixer, Hi-Fi stereo audio system,

recording equipment, or speakers with

dual ¼” jack inputs.
|-
|XPOF-XF
|[[File:Cable 24.jpg|centre|thumb|200x200px]]
|XLR FEMALE -
RCA FEMALE
|AUDIO
|Can be used to plug your mixer's XLR line
outputs into a standalone recorder's RCA

inputs, as well as other dives with the same outputs/inputs.
|-
|XPOM-XF
|[[File:Cable 25.jpg|centre|thumb|200x200px]]
|XLR FEMALE -
RCA MALE
|AUDIO
|This cable converts a balanced audio signal
into an unbalanced signal. This is good for

sending audio signals from an XLR source

to an RCA input or vice versa.
|-
|XPOM-XM
|[[File:Cable 26.jpg|centre|thumb|200x200px]]
|XLR MALE -

RCA MALE
|AUDIO
|This cable converts a balanced audio signal

into an unbalanced signal. This is good for

sending audio signals from an XLR source

to an RCA input or vice versa.
|-
|XPOF-XM
|[[File:Cable 27.jpg|centre|thumb|200x200px]]
|XLR MALE -
RCA FEMALE
|AUDIO
|This cable converts a balanced audio signal
into an unbalanced signal. This is good for

sending audio signals from an XLR source

to an RCA input or vice versa.
|-
|YPEFPEM
|[[File:Cable 28.jpg|centre|thumb|200x200px]]
|1/4" MALE -
1/4" FEMALE Y
|AUDIO
|For extending a ¼” male cable into a
dual ¼” female cable.
|-
|YPEMPOM
|[[File:Cable 29.jpg|centre|thumb|200x200px]]
|1/4" MALE -
RCA MALE Y
|AUDIO
|Connects audio devices with the ¼” Male
to Dual RCA for amplifiers, Hi Fi stereo

audio system, speakers, recording

equipment, home theater system etc.
|-
|XPEMPEM
|[[File:Cable 30.jpg|centre|thumb|200x200px]]
|1/4" MALE -
1/4" MALE
|AUDIO
|The audio cable male to male connectors
are compatible with microphones, musical instruments, guitars, amplifiers, audio

consoles, mixer audio, and much more.
|-
|XPEFPEM
|[[File:Cable 31.jpg|centre|thumb|200x200px]]
|1/4" MALE -
1/4" FEMALE
|AUDIO
|This audio cable is an extension cable
for a male to male ¼” cable.
|-
|X-MF-XM
|[[File:Cable 32.jpg|centre|thumb|200x200px]]
|XLR MALE -
MINI FEMALE
|AUDIO
|This ⅛” to XLR cable connects
devices with an ⅛” jack, such as

Phones, iPod, MP3 player, tablet,

laptop, or voice recorder, to a

mixing console or speaker.
|-
|YPOF-MM
|[[File:Cable 33.jpg|centre|thumb|200x200px]]
|XLR FEMALE -
MINI MALE STEREO
|AUDIO
|This cable connects a professional
mic to a camera, computer, recorder,

or any compatible device.
|-
|X-MF-XF
|[[File:Cable 34.jpg|centre|thumb|200x200px]]
|XLR FEMALE -
MINI FEMALE
|AUDIO
|This mini ⅛” female to XLR female
cable can be used to connect the

stereo output of an audio device

to a single XLR line input on a

mixing console.
|-
|X-MM-XF
|[[File:Cable 35.jpg|centre|thumb|200x200px]]
|XLR FEMALE -
MINI MALE MONO
|AUDIO
|This cable can be used with a
microphone cable, monitor speakers,

audio interfaces, PA applications

and more.
|-
|X-XF-XF
|[[File:Cable 36.jpg|centre|thumb|200x200px]]
|(BARREL)
XLR FEMALE -

XLR MALE
|AUDIO
|Designed to eliminate interference
associated with ground loops.
|-
|XPEM-XF
|[[File:Cable 37.jpg|centre|thumb|200x200px]]
|(BARREL)
XLR FEMALE -

1/4" MALE
|AUDIO
|This adapter maintains the balanced
nature of the signal and is useful

for line level signals requiring connector

changes.
|-
|X-BRIDG
|[[File:Cable 38a.jpg|centre|thumb|200x200px]]
|Bridging Transformer
|AUDIO
|Balanced low impedance to high
impedance matching transformer.

Use for transmitting a low impedance

source to a high impedance source.
|-
|X-LOPAS
|[[File:Cable 38b.jpg|centre|thumb|200x200px]]
|Line Pad / LoPass
|AUDIO
|Passes low frequencies and cuts
high frequencies. Use to balance / cut

out unwanted noise.
|-
|X-HIPAS
|[[File:Cable 38c.jpg|centre|thumb|200x200px]]
|HI-LO / HiPass
|AUDIO
|Cuts low frequencies and passes
high frequencies. Use to balance /

cut out unwanted noise.
|-
|X-PRESE
|[[File:Cable 38d.jpg|centre|thumb|200x200px]]
|Phase
|AUDIO
|Takes a signal and puts it 180º out
of phase. Use to invert an electrical

signal.
|-
|X-RESPON
|[[File:Cable 38e.jpg|centre|thumb|200x200px]]
|Response Shaper
|AUDIO
|Cuts frequencies at 5k. Use this to
balance / cut out unwanted noise.
|-
|XPEM-XM
|[[File:Cable 39.jpg|centre|thumb|200x200px]]
|XLR MALE -
1/4" MALE
|AUDIO
|This cable is designed to connect
gear with balanced phone outputs

to gear with XLR inputs. It is ideal

for use in a variety of audio

applications.
|-
|XPEM-XF
|[[File:Cable 40.jpg|centre|thumb|200x200px]]
|XLR FEMALE -
1/4" MALE
|AUDIO
|This cable is designed to connect
gear with balanced phone outputs to

gear with XLR inputs. It is ideal for

use in a variety of audio applications.
|-
|YPEM-XM
|[[File:Cable 41.jpg|centre|thumb|200x200px]]
|XLR MALE -
1/4" MALE Y
|AUDIO
|This cable is perfect for connecting
microphones with 1/4 inch jack to

cameras, camcorders, or other

professional audio equipments with

XLR connector. Suitable for mic, mixer,

amplifier, home theater and other

environments.
|-
|YPEM-XF
|[[File:Cable 42.jpg|centre|thumb|200x200px]]
|XLR FEMALE -
1/4" MALE Y
|AUDIO
|This cable is perfect for connecting
microphones with 1/4 inch jack to

cameras, camcorders, or other

professional audio equipments with

XLR connector. Suitable for mic, mixer,

amplifier, home theater and other

environments.
|-
|X-XM-XM
|[[File:Cable 43.jpg|centre|thumb|200x200px]]
|XLR MALE -
XLR MALE
|AUDIO
|Designed to change an XLR input
into an XLR output.
|-
|X-XF-XF
|[[File:Cable 44.jpg|centre|thumb|200x200px]]
|XLR FEMALE -
XLR FEMALE
|AUDIO
|Designed to change an XLR output
into an XLR input.
|-
|Y-XF-XM
|[[File:Cable 45.jpg|centre|thumb|200x200px]]
|XLR MALE -
XLR FEMALE Y
|AUDIO
|This cable is designed to connect two
XLR outputs to one XLR input. It may be

used to connect two microphones to one

channel on a mixing console when a second channel is unavailable.
|-
|Y-XM-XF
|[[File:Cable 46.jpg|centre|thumb|200x200px]]
|XLR FEMALE -
XLR MALE Y
|AUDIO
|This Y-cable is designed to connect
an XLR output to two XLR inputs. It is

ideal for assigning the signal from a

microphone to two channels on a

mixing console.
|}
[[Category:Media Loan]]

Media Loan Cables and Adapters

2018-08-30T21:27:10Z

Medialoan10: Medialoan10 moved page Media Loan Cables and Adapters to Cables and Adapters: cuz

#REDIRECT [[Cables and Adapters]]

Cables and Adapters Catalog

2018-08-30T21:27:09Z

Medialoan10: Medialoan10 moved page Media Loan Cables and Adapters to Cables and Adapters: cuz

{| class="wikitable"
!TESC
SKU
!IMAGE
!TYPE
!AUDIO/
VIDEO
!USAGE
|-
|XMM-MF
|[[File:Cable 1.jpg|centre|thumb|200x200px]]
|MINI MALE -MINI FEMALE
|AUDIO
|Extension cable for microphones,
headphones, smartphones, tablets, or

other media players.
|-
|XMF-MF
|[[File:Cable 2.jpg|centre|thumb|200x200px]]
|MINI FEMALE -
MINI FEMALE
|AUDIO
|Extension cable for microphones,

headphones, smartphones, tablets, or

other media players.
|-
|X-MM-MM
|[[File:Cable 3.jpg|centre|thumb|200x200px]]
|MINI MALE -
MINI MALE
|AUDIO
|Extension cable for microphones,

headphones, smartphones, tablets, or

other media players.
|-
|Y-MM-MF
|[[File:Cable 4.jpg|centre|thumb|200x200px]]
|MINI MALE -
MINI FEMALE Y
|AUDIO
|Extension cable for microphones,

headphones, smartphones, tablets, or

other media players.
|-
|XPOFPOM
|[[File:Cable 5.jpg|centre|thumb|200x200px]]
|RCA MALE -
RCA FEMALE
|AUDIO/
VIDEO
|Adaptor to extend the length of

your mono cable, subwoofer cable,

digital audio cable or video cable whilst

maintaining an optimized connection.
|-
|YPOMPOM
|[[File:Cable 6.jpg|centre|thumb|200x200px]]
|RCA MALE -
RCA MALE Y
|AUDIO/
VIDEO
|Ideal for home-entertainment and
high-fidelity (HiFi) systems. The split RCA

on one end allows you to connect to

multiple devices.
|-
|XMM-POM
|[[File:Cable 7.jpg|centre|thumb|200x200px]]
|RCA MALE -
MINI MALE
|AUDIO
|Adapter cable connects a smartphone,
tablet, or MP3 player to a speaker,

stereo receiver, or other RCA-enabled device.
|-
|XMF-POF
|[[File:Cable 8.jpg|centre|thumb|200x200px]]
|RCA MALE -
MINI FEMALE
|AUDIO
|This cable adapter allows you to plug a
separate ⅛” cable into this adapter and

then connect to RCA auxiliary inputs on

your sound system or other device.
|-
|YPOM-MM
|[[File:Cable 9.jpg|centre|thumb|200x200px]]
|RCA MALE Y -

MINI MALE
|AUDIO
|Adapter cable connects various audio

devices with various kinds of stereo players.
|-
|YPOF-MM
|[[File:Cable 10.jpg|centre|thumb|200x200px]]
|RCA FEMALE Y -
MINI MALE
|AUDIO
|This adaptor is for converting sound from
a computer or any other source that outputs

a ⅛” connector to a receiver, amp, or any

device that uses a stereo RCA input.
|-
|YPOMPOF
|[[File:Cable 11.jpg|centre|thumb|200x200px]]
|RCA FEMALE -
RCA MALE Y
|AUDIO/
VIDEO
|Adaptor or extension to a split RCA cable.
Convert the signal from dual RCA jacks

(stereo) to a single RCA jack (mono)
|-
|YPOFPOM
|[[File:Cable 12.jpg|centre|thumb|200x200px]]
|RCA FEMALE Y -
RCA MALE
|AUDIO/
VIDEO
|Split RCA cable to single. Use to split any
RCA jack into two jacks.
|-
|XPOMPOM
|[[File:Cable 14.jpg|centre|thumb|200x200px]]
|RCA MALE -
RCA MALE

(MONO)
|AUDIO
|For single channel audio to many
devices. (mono)
|-
|ZPOMPOM
|[[File:Cable 15.jpg|centre|thumb|200x200px]]
|RCA MALE -
RCA MALE

(STEREO)
|AUDIO
|For connecting stereo speakers or other
audio devices. (stereo)
|-
|VPOMPOM
|[[File:Cable 16.jpg|centre|thumb|200x200px]]
|RCA MALE -
RCA MALE

A/V
|AUDIO/
VIDEO
|For connecting audio and video to a
TV or similar devices.
|-
|XPEMPOM
|[[File:Cable 17.jpg|centre|thumb|200x200px]]
|1/4" MALE -
RCA MALE
|AUDIO
|Connects audio devices with the ¼” Male
to RCA for amplifiers, Hi Fi stereo audio

system, speakers, recording equipment,

home theater system etc.
|-
|YPOFPEM
|[[File:Cable 18.jpg|centre|thumb|200x200px]]
|1/4" MALE -
RCA FEMALE Y
|AUDIO
|This cable is designed to split a stereo signal.
|-
|YPEFPOF
|[[File:Cable 19.jpg|centre|thumb|200x200px]]
|1/4" FEMALE -
RCA FEMALE Y
|AUDIO
|These cables allow you to interface between
¼” Stereo and split RCA, so you can connect

between speakers and audio devices that

don't both have the same connection types.
|-
|YPEFPOF
|[[File:Cable 20.jpg|centre|thumb|200x200px]]
|1/4" FEMALE Y -

RCA FEMALE
|AUDIO
|This cable adaptor is used for connecting a

1/4 “ cable to a RCA cable, used for splitting

to multiple inputs.
|-
|XPEFPEF
|[[File:Cable 21.jpg|centre|thumb|200x200px]]
|1/4" FEMALE -
1/4" FEMALE
|AUDIO
|This adaptor is designed to couple cables
with phone plugs. It works with mono or

stereo plugs.
|-
|X-MM-PEF
|[[File:Cable 22.jpg|centre|thumb|200x200px]]
|1/4" FEMALE -
MINI MALE
|AUDIO
|These cables convert a large stereo 1/4" to
a small stereo 1/8" mini male.
|-
|YMM-PEM
|[[File:Cable 23.jpg|centre|thumb|200x200px]]
|1/4" MALE Y -
MINI MALE
|AUDIO
|Connects your laptop, iPhone,
or iPod with a ⅛” jack output with an AV receiver,

amplifier, mixer, Hi-Fi stereo audio system,

recording equipment, or speakers with

dual ¼” jack inputs.
|-
|XPOF-XF
|[[File:Cable 24.jpg|centre|thumb|200x200px]]
|XLR FEMALE -
RCA FEMALE
|AUDIO
|Can be used to plug your mixer's XLR line
outputs into a standalone recorder's RCA

inputs, as well as other dives with the same outputs/inputs.
|-
|XPOM-XF
|[[File:Cable 25.jpg|centre|thumb|200x200px]]
|XLR FEMALE -
RCA MALE
|AUDIO
|This cable converts a balanced audio signal
into an unbalanced signal. This is good for

sending audio signals from an XLR source

to an RCA input or vice versa.
|-
|XPOM-XM
|[[File:Cable 26.jpg|centre|thumb|200x200px]]
|XLR MALE -

RCA MALE
|AUDIO
|This cable converts a balanced audio signal

into an unbalanced signal. This is good for

sending audio signals from an XLR source

to an RCA input or vice versa.
|-
|XPOF-XM
|[[File:Cable 27.jpg|centre|thumb|200x200px]]
|XLR MALE -
RCA FEMALE
|AUDIO
|This cable converts a balanced audio signal
into an unbalanced signal. This is good for

sending audio signals from an XLR source

to an RCA input or vice versa.
|-
|YPEFPEM
|[[File:Cable 28.jpg|centre|thumb|200x200px]]
|1/4" MALE -
1/4" FEMALE Y
|AUDIO
|For extending a ¼” male cable into a
dual ¼” female cable.
|-
|YPEMPOM
|[[File:Cable 29.jpg|centre|thumb|200x200px]]
|1/4" MALE -
RCA MALE Y
|AUDIO
|Connects audio devices with the ¼” Male
to Dual RCA for amplifiers, Hi Fi stereo

audio system, speakers, recording

equipment, home theater system etc.
|-
|XPEMPEM
|[[File:Cable 30.jpg|centre|thumb|200x200px]]
|1/4" MALE -
1/4" MALE
|AUDIO
|The audio cable male to male connectors
are compatible with microphones, musical instruments, guitars, amplifiers, audio

consoles, mixer audio, and much more.
|-
|XPEFPEM
|[[File:Cable 31.jpg|centre|thumb|200x200px]]
|1/4" MALE -
1/4" FEMALE
|AUDIO
|This audio cable is an extension cable
for a male to male ¼” cable.
|-
|X-MF-XM
|[[File:Cable 32.jpg|centre|thumb|200x200px]]
|XLR MALE -
MINI FEMALE
|AUDIO
|This ⅛” to XLR cable connects
devices with an ⅛” jack, such as

Phones, iPod, MP3 player, tablet,

laptop, or voice recorder, to a

mixing console or speaker.
|-
|YPOF-MM
|[[File:Cable 33.jpg|centre|thumb|200x200px]]
|XLR FEMALE -
MINI MALE STEREO
|AUDIO
|This cable connects a professional
mic to a camera, computer, recorder,

or any compatible device.
|-
|X-MF-XF
|[[File:Cable 34.jpg|centre|thumb|200x200px]]
|XLR FEMALE -
MINI FEMALE
|AUDIO
|This mini ⅛” female to XLR female
cable can be used to connect the

stereo output of an audio device

to a single XLR line input on a

mixing console.
|-
|X-MM-XF
|[[File:Cable 35.jpg|centre|thumb|200x200px]]
|XLR FEMALE -
MINI MALE MONO
|AUDIO
|This cable can be used with a
microphone cable, monitor speakers,

audio interfaces, PA applications

and more.
|-
|X-XF-XF
|[[File:Cable 36.jpg|centre|thumb|200x200px]]
|(BARREL)
XLR FEMALE -

XLR MALE
|AUDIO
|Designed to eliminate interference
associated with ground loops.
|-
|XPEM-XF
|[[File:Cable 37.jpg|centre|thumb|200x200px]]
|(BARREL)
XLR FEMALE -

1/4" MALE
|AUDIO
|This adapter maintains the balanced
nature of the signal and is useful

for line level signals requiring connector

changes.
|-
|X-BRIDG
|[[File:Cable 38a.jpg|centre|thumb|200x200px]]
|Bridging Transformer
|AUDIO
|Balanced low impedance to high
impedance matching transformer.

Use for transmitting a low impedance

source to a high impedance source.
|-
|X-LOPAS
|[[File:Cable 38b.jpg|centre|thumb|200x200px]]
|Line Pad / LoPass
|AUDIO
|Passes low frequencies and cuts
high frequencies. Use to balance / cut

out unwanted noise.
|-
|X-HIPAS
|[[File:Cable 38c.jpg|centre|thumb|200x200px]]
|HI-LO / HiPass
|AUDIO
|Cuts low frequencies and passes
high frequencies. Use to balance /

cut out unwanted noise.
|-
|X-PRESE
|[[File:Cable 38d.jpg|centre|thumb|200x200px]]
|Phase
|AUDIO
|Takes a signal and puts it 180º out
of phase. Use to invert an electrical

signal.
|-
|X-RESPON
|[[File:Cable 38e.jpg|centre|thumb|200x200px]]
|Response Shaper
|AUDIO
|Cuts frequencies at 5k. Use this to
balance / cut out unwanted noise.
|-
|XPEM-XM
|[[File:Cable 39.jpg|centre|thumb|200x200px]]
|XLR MALE -
1/4" MALE
|AUDIO
|This cable is designed to connect
gear with balanced phone outputs

to gear with XLR inputs. It is ideal

for use in a variety of audio

applications.
|-
|XPEM-XF
|[[File:Cable 40.jpg|centre|thumb|200x200px]]
|XLR FEMALE -
1/4" MALE
|AUDIO
|This cable is designed to connect
gear with balanced phone outputs to

gear with XLR inputs. It is ideal for

use in a variety of audio applications.
|-
|YPEM-XM
|[[File:Cable 41.jpg|centre|thumb|200x200px]]
|XLR MALE -
1/4" MALE Y
|AUDIO
|This cable is perfect for connecting
microphones with 1/4 inch jack to

cameras, camcorders, or other

professional audio equipments with

XLR connector. Suitable for mic, mixer,

amplifier, home theater and other

environments.
|-
|YPEM-XF
|[[File:Cable 42.jpg|centre|thumb|200x200px]]
|XLR FEMALE -
1/4" MALE Y
|AUDIO
|This cable is perfect for connecting
microphones with 1/4 inch jack to

cameras, camcorders, or other

professional audio equipments with

XLR connector. Suitable for mic, mixer,

amplifier, home theater and other

environments.
|-
|X-XM-XM
|[[File:Cable 43.jpg|centre|thumb|200x200px]]
|XLR MALE -
XLR MALE
|AUDIO
|Designed to change an XLR input
into an XLR output.
|-
|X-XF-XF
|[[File:Cable 44.jpg|centre|thumb|200x200px]]
|XLR FEMALE -
XLR FEMALE
|AUDIO
|Designed to change an XLR output
into an XLR input.
|-
|Y-XF-XM
|[[File:Cable 45.jpg|centre|thumb|200x200px]]
|XLR MALE -
XLR FEMALE Y
|AUDIO
|This cable is designed to connect two
XLR outputs to one XLR input. It may be

used to connect two microphones to one

channel on a mixing console when a second channel is unavailable.
|-
|Y-XM-XF
|[[File:Cable 46.jpg|centre|thumb|200x200px]]
|XLR FEMALE -
XLR MALE Y
|AUDIO
|This Y-cable is designed to connect
an XLR output to two XLR inputs. It is

ideal for assigning the signal from a

microphone to two channels on a

mixing console.
|}
[[Category:Media Loan]]

Cables and Adapters Catalog

2018-08-30T21:23:36Z

Medialoan10:

Cables and Adapters Catalog

2018-08-30T20:53:26Z

Medialoan10:

Cables and Adapters Catalog

2018-08-30T20:42:34Z

Medialoan10:

File:Cable 43.jpg

2018-08-30T20:11:36Z

Medialoan10:

Cables and Adapters Catalog

2018-08-30T20:09:08Z

Medialoan10:

File:Cable 46.jpg

2018-08-30T20:08:53Z

Medialoan10:

File:Cable 45.jpg

2018-08-30T20:08:26Z

Medialoan10:

File:Cable 44.jpg

2018-08-30T20:08:04Z

Medialoan10:

File:Cable 42.jpg

2018-08-30T20:07:28Z

Medialoan10:

File:Cable 41.jpg

2018-08-30T20:07:06Z

Medialoan10:

File:Cable 40.jpg

2018-08-30T20:06:43Z

Medialoan10:

File:Cable 39.jpg

2018-08-30T20:06:09Z

Medialoan10:

File:Cable 38e.jpg

2018-08-30T20:05:37Z

Medialoan10:

File:Cable 38d.jpg

2018-08-30T20:04:57Z

Medialoan10:

File:Cable 38c.jpg

2018-08-30T20:04:23Z

Medialoan10:

File:Cable 38b.jpg

2018-08-30T20:03:32Z

Medialoan10:

File:Cable 38a.jpg

2018-08-30T20:03:03Z

Medialoan10:

File:Cable 37.jpg

2018-08-30T20:02:18Z

Medialoan10:

File:Cable 36.jpg

2018-08-30T20:01:44Z

Medialoan10:

File:Cable 35.jpg

2018-08-30T20:01:10Z

Medialoan10:

File:Cable 34.jpg

2018-08-30T20:00:07Z

Medialoan10:

File:Cable 33.jpg

2018-08-30T19:59:31Z

Medialoan10:

File:Cable 32.jpg

2018-08-30T19:57:12Z

Medialoan10:

File:Cable 31.jpg

2018-08-30T19:56:40Z

Medialoan10:

File:Cable 30.jpg

2018-08-30T19:54:46Z

Medialoan10:

File:Cable 29.jpg

2018-08-30T19:54:07Z

Medialoan10:

File:Cable 28.jpg

2018-08-30T19:53:00Z

Medialoan10:

File:Cable 27.jpg

2018-08-30T19:52:30Z

Medialoan10:

File:Cable 26.jpg

2018-08-30T19:52:02Z

Medialoan10:

Cables and Adapters Catalog

2018-08-30T19:51:33Z

Medialoan10:

Cables and Adapters Catalog

2018-08-30T19:06:46Z

Medialoan10:

File:Cable 25.jpg

2018-08-30T18:28:32Z

Medialoan10:

File:Cable 24.jpg

2018-08-30T18:27:46Z

Medialoan10:

File:Cable 23.jpg

2018-08-30T18:27:25Z

Medialoan10:

File:Cable 22.jpg

2018-08-30T18:26:45Z

Medialoan10:

File:Cable 21.jpg

2018-08-30T18:25:54Z

Medialoan10:

File:Cable 20.jpg

2018-08-30T18:25:22Z

Medialoan10:

File:Cable 19.jpg

2018-08-30T18:24:37Z

Medialoan10:

Cables and Adapters Catalog

2018-08-30T18:24:11Z

Medialoan10:

File:Cable 18.jpg

2018-08-30T18:23:08Z

Medialoan10:

File:Cable 17.jpg

2018-08-30T18:22:29Z

Medialoan10: