DELETE Mediaworks- Intro to Audition

From Help Wiki

A introduction into Adobe Audition

Orca

Remember, do NOT work on editing straight from ORCA!!! You must first drag your files from ORCA to the computer you are working on before editing, or else you may be responsible for crashing the server. Here are resources to help you connect to ORCA both on-campus and off-campus:

Connect to Orca - Mac

Connect to Orca - Windows

Multimedia Lab and Video Edit Suites

Please Read the MML Lab Use Guidelines Below

Lab Use Guidelines - MML

Intro to Adobe Audition

In the Waveform Editor you can edit single audio tracks, but in this mode edits are destructive. This means that unless you SAVE AS to a different file name/location you will be permanently changing your original file. One more reason to have your files saved to several locations!

Please read the Waveform Editing article.

In the Multitrack Editor you can mix together multiple audio tracks to created layered compositions and soundscapes. The Multitrack Editor is non-destructive, meaning that you can always make changes to you project.

Make a New Session - Multitrack Editor

Multitrack sessions create a .sesx project file.

Always keep all of the audio files and .sesx file in one folder.

  1. On the desktop create a new folder with your name.
  2. In Audition go to File > Multitrack Session and set the following settings:
  3. Session Name: use a meaningful name.
  4. Folder Location: Click Browse and select your folder on the local computer drive.
  5. Template : None
  6. Sample Rate: 48000
  7. Bit Depth : 24
  8. Master: Stereo
  9. Click OK

Importing Files

Before importing files copy them to a folder inside your session folder. If audio files are located outside of the session folder Audition will ask to copy the files when saving. Always click Yes

Importing to the Files Panel

  1. Go to Files > Import > Files...
  2. Browse to your files
  3. Click on a file to select one file
  4. Shift click to select multiple concurrent files
  5. Command click to select multiple non-concurrent files

Moving Clips

Use the Move tool (V) to move clips. To move a clip, click on the the name and drag to the new location.

When snapping is on clips will be aligned to the edges of the nearest clip.

Press the S key or click the magnet icon to turn snapping on or off.

Trimming and Extending Clips

  • With the Move tool (V) or the Time Selection tool (T), move to the edge of a clip until the red bracket appears.
  • In this way, clips can be shortened or lengthened.
  • This is non-destructive.
  • With the Time Selection tool (T), you can highlight a portion of audio and press delete to make that section disappear.
  • If you press option + delete then Audition will automatically connect the audio again so there is not a blank space.

Fades and Crossfades

  • For more detail see the Adobe article
  • To add a fade in or fade out to a clips click the square in the upper corner at the beginning or end of a clip.
  • Drag left or right to apply the fade.
  • Drag up or down to change the shape.
  • When clips overlap an crossfade will be added.
  • Adjust the crossfade like you adjust a fade.
  • Automatic crossfades can be turned off by selecting a clip and unselecting Clip > Automatic Crossfade Enabled
  • This only effects the selected clip.

Track Volume

  • Each track has its own volume and pan settings.
  • These settings also show up as the levels in the mixer panel.
  • These are separate from the clip volume and pan settings.
  • The levels are set for in time in the track. They do not move with clips.
  • This can be confusing.
  • On the left side of a track, click the triangle to the left of the word Read so that it is pointing down.
  • For Show Envelopes select volume or pan.
  • Hover over the volume or pan line and double click to add a point.
  • Points can be moved up or down or left to right to change the values.

Clip Volume

  • Each clip has it's own volume and pan settings that move with the clip when it is moved.
  • When looking at your envelopes, hover over the volume or pan line, etc., and double click to add a point.
  • Points can be moved up or down or left to right to change the values.
  • These settings do not affect the volume or pan control in the mixer.

Getting your video into Audition

To open your video:

  • In the Multitrack Editor, position the current‑time indicator at the desired insertion point.
  • Choose Multitrack > Insert File, and select a video file in a supported format.
  • When you finish mixing audio for the video, export a mixdown, and import it into your video application

Frame Rate:

  • Check the properties of the video to make sure the frame rate matches the Adobe Audition Settings
  • The video frame rate will need to be 24fps for 16mm digitized films

Select: Adobe Audition CC > Preferences > Time Display > SMPTE 24 fps (film) > OK

Saving

  1. Go to File > Save to save the session.
  2. If any files are located outside of your session folder a warning will appear.
  3. Click Yes to have the files copied to your session folder.

Exporting

  1. Go to Export > Multitrack Mixdown > and select
  2. Time Selection to export only the selected time
  3. Entire Session for the entire project
  4. Selected Clips for selected clips
  5. In the Export Multitrack Mixdown dialog set
  6. File Name : name the file
  7. Location : click browse to select a folder
  8. Sample Source: Click Change and set Bit Depth to 24 bits. and click OK
  9. Click OK

ORCA AGAIN

Remember, do NOT work on editing straight from ORCA!!! You must first drag your files from ORCA to the computer you are working on before editing, or else you may be responsible for crashing the server. When putting your files in your personal cubby or in the shared workspace make sure to keep all of your files together in one project folder. This will insure that you have all of the necessary files to allow you to continue editing on another day, and also it will keep your files organized so that projects do not get mixed together.

This content is out of date or no longer relevant and should be considered for deletion.