Template:AVclassroom template podTLP350
From Help Wiki
- Press any of the source buttons on the AV Control Panel to start the projector(s) and turn on the system
- Press the ‘Computer’ button on the AV Control Panel.
- Select the option you want from the touch screen on the AV Control Panel ‘Mac Mini,’ ‘VGA,’ or ‘HDMI’.
- Attach the VGA or HDMI cables to your laptop; make sure to plug in the audio plug on the VGA cable to the laptop's earphone jack for VGA.
- Press the ‘Document Camera’ button on the console attached to the podium.
- Turn on the Document Camera. Be patient, this can take up to a minute to warm up.
- Press the ‘Bluray’ button on the console attached to the podium.
- On the Bluray player, press the open button to load your disc.
- The Bluray player can also play DVD and CD discs.
- Press the ‘VCR/DVD’ button on the console attached to the podium.
- Select either VCR or DVD from the touch screen on the AV Control Panel.
- Insert VHS or DVD.
- The DVD player will also play CDs.
- The DVD player will not toast round food.
- Press the ‘Music’ button on the AV Control Panel.
- Attach the VGA audio cable to the headphone port on your device.
- Make sure the device volume is turned up, and while playing something, adjust listening level with the volume knob on the AV Control Panel.
- Press the ‘Mic Only’ button on the AV Control Panel.
- Use either the wired or wireless microphone.
- Adjust the volume on the mics through the touch screen panel.
- Microphone volume is separate from the main volume for AV sources (control mics from 'mic only', control everything else with the volume knob.
- Muting microphones is done with the mutes on this screen
- Press the ‘Mute All’ button on the AV Control Panel.
- The image should turn black and the accompanying sound become muted.
- Press ‘Mute All’ again to 'unmute'.
Remember to turn things off when you are done!
- Press the ‘System Off’ button on the console attached to the podium.
- Press ‘Power Down’ to turn off the projector(s) and system.
- - Try pressing 'Mute All' and then pressing again to unmute
- - Is data projector turned on? (try starting again, & call x6270)
- - Is the cable firmly connected to the laptop (or adapter, and adapter to laptop)
- - Is volume on AV control panel turned up enough to hear?
- - Laptop: Is the volume on the laptop turned up and source selected? (HDMI button for HDMI connection, etc?)