View source for 02R-APOLLO-PROTOOLS Cheat Sheet

== '''At a Glance''' ==
'''Directions for using the Yamaha 02R Console''':
* 	Locate Scene memory > Press '''Display''' > Toggle to Scene '''95 or 96''' > Press '''Recall'''
** 	Scene 95 is for Multitrack Recording, Scene 96 is for Surround Mixing.

*Studio: Patch in microphone to Panel A, Input 1
(Mic panels in 1362 are normalized to the inputs of 02R MIC/LINE inputs)

*02R - find '''Layer''' section and select Layer 1-24
*Trim out microphone on Channel 1 of the 02R, and use +48V On/Off switch as needed (for condenser microphones, etc.)
*Push fader up and you should see levels on the Meters
*Push up stereo fader (Main Mix fader)
*On the Control Room section, select '''STEREO'''
*Turn up '''Control Room Level''' light grey knob to control speaker volume
*Open Pro Tools and choose the '''API Stereo''' template; save to Storage drive in your folder with your name on it.
*On Layer 25-48 of the O2R, channels 33 and 34 are the MAIN L/R OUT of Pro Tools (Main Out L/R comes out of outputs 9/10 of the Apollo X16).
<br>
'''Headphone Mixes'''
*Use the '''Encoder''' knobs on the 02R to control headphone volume
*In the '''Encoder Mode''' section select '''AUX'''
**Aux 7 is normed to Cue 1, Aux 8 is normed to Cue 2
*Use the Encoder knob on your '''LIVE''' channel to control volume to the headphones
*Use the Encoder knob on channels 33 and 34 to control volume from Pro Tools Main L/R
<br>
[[Category: Audio Lab]]
<br>
[[File:02R cheat sheet 2024.pdf|left|thumb]]