Audio Monitoring - Sound Effects Studio - Revision history

Krusea: /* Headphone Levels */

2023-03-30T22:27:10Z

‎Headphone Levels

Krusea: /* Speaker Levels */

2023-03-30T22:22:17Z

‎Speaker Levels

Krusea: /* Speaker Levels */

2023-03-30T22:18:38Z

‎Speaker Levels

Krusea: Created page with "== '''Speaker Levels''' == There is a '''Mackie Big Knob''' '''volume control box''' to the left of the iMac # Start with the output level down #* The silver knob is turned..."

2023-03-27T22:54:57Z

Created page with "== '''Speaker Levels''' == There is a '''Mackie Big Knob''' '''volume control box''' to the left of the iMac # Start with the output level down #* The silver knob is turned..."

New page

== '''Speaker Levels''' ==
There is a '''Mackie Big Knob''' '''volume control box''' to the left of the iMac
# Start with the output level down
#* The silver knob is turned all the way to the left
# Set the '''Source Select''' button to '''A''' to select the '''MOTU 828 output.'''
# Start playing sound in an application.
# Slowly turn the silver knob to the right to increase the volume.

== '''Headphone Levels''' ==
Headphones can be connected to the front of the '''MOTU 828'''

There is a small headphone volume knob above the headphone jack on the '''MOTU 828'''
# Turn the silver output level down on the '''Mackie Big Knob volume control box'''
#* The knob is turned all the way to the left
# Turn the headphone volume down
#* The is knob turned all the way to the left
# Connect headphones to the headphone jack on the '''MOTU 828'''
# Slowly turn the headphone volume knob to the right to increase the volume

[[Category:Sound Effects Studio]]

@@ Line 10: / Line 10: @@
 #* The big knob is turned all the way to the left
 # Use the '''Input Monitor Mix''' knob to adjust the mix between the direct input signals and the output of the computer playback.
-# Start playing sound in an application or get signal on a microphone
+# Start playing sound in an application or get signal on a microphone.
 # Slowly turn the '''Monito'''r knob to the right to increase the volume.
 == '''Headphone Levels''' ==
-Headphones can be connected to the front of the '''MOTU 828'''
+The '''MOTU M4''' headphone output is connected to a 4 channel headphone amp.
+* There is a small headphone volume knob above the headphone jack on the '''MOTU M4'''.
-There is a small headphone volume knob above the headphone jack on the '''MOTU 828'''
+* Set the '''MOTU M4''' headphone knob to 2:00.
-# Turn the silver output level down on the '''Mackie Big Knob volume control box'''
+# Turn the '''Monitor''' level down.
-#* The knob is turned all the way to the left
+#* The big knob is turned all the way to the left
-# Turn the headphone volume down
+# Set the '''MOTU M4''' headphone knob to 2:00.
-#* The is knob turned all the way to the left
+# Turn down the headphone levels on the 4 knobs on the headphone amp.
-# Connect headphones to the headphone jack on the '''MOTU 828'''
+# Connect headphones to the headphone amp.
-# Slowly turn the headphone volume knob to the right to increase the volume
+# Use the '''Input Monitor Mix''' knob to adjust the mix between the direct input signals and the output of the computer playback.
 [[Category:Sound Effects Studio]]

@@ Line 1: / Line 1: @@
 == Input Monitoring ==
 * The '''MON''' button on inputs 1 and 2 sends the input signal directly to the outputs for low latency monitoring.
-* Use the '''Input Mon Mix''' knob to adjust the mxix between the direct input signals and the output of the computer playback.y to
+* Use the '''Input Monitor Mix''' knob to adjust the mix between the direct input signals and the output of the computer playback.
 * Turn all the way to the left for input only.
 * Turn all the way to the right for playback only.
 == '''Speaker Levels''' ==
-There is a '''Mackie Big Knob''' '''volume control box''' to the left of the iMac
+The '''Monitor''' knob on the '''MOTU 4''' adjust the speaker levels.
-# Start with the output level down
+# Start with the '''Monitor''' level down
-#* The silver knob is turned all the way to the left
+#* The big knob is turned all the way to the left
-# Set the '''Source Select''' button to '''A''' to select the '''MOTU 828 output.'''
+# Use the '''Input Monitor Mix''' knob to adjust the mix between the direct input signals and the output of the computer playback.
-# Start playing sound in an application.
+# Start playing sound in an application or get signal on a microphone
-# Slowly turn the silver knob to the right to increase the volume.
+# Slowly turn the '''Monito'''r knob to the right to increase the volume.
 == '''Headphone Levels''' ==