Wrrt7350 at 01:14, 26 September 2026

2026-09-26T01:14:46Z

Wrrt7350 at 01:14, 26 September 2026

2026-09-26T01:14:16Z

Wrrt7350: Created page with "==Headphone Mixes in the Audio Lab== The '''Audio Lab''' has two independent mono headphone cues that are distributed at line level to several small analog mixers in the studi..."

2026-09-26T01:13:17Z

Created page with "==Headphone Mixes in the Audio Lab== The '''Audio Lab''' has two independent mono headphone cues that are distributed at line level to several small analog mixers in the studi..."

New page

==Headphone Mixes in the Audio Lab==
The '''Audio Lab''' has two independent mono headphone cues that are distributed at line level to several small analog mixers in the studio and control room'''.''' These mixers are hard-wired from the patch bay and the 1/4" cables for Cue A and Cue B should not be unplugged or moved. The "phones" out should be used to listen on headphones.

Each mixer receives signal from both Cue A and Cue B, so each set of headphones can either hear one of two cues or a blend between the two.

API Echo Sends 1 and 2 are normalled to the Cue A and Cue B distros that feed all the mixers.

==='''CUE 1'''===
#Cue 1 out of your DAW (when using the template) will come out of Apollo X16 Line Output 15.
#Apollo X16 Line Output 15 is normalled to the API Echo 1 Module.
#Turn ON the Echo 1 module on the API.
#Press the TB button on the Echo 1 module on the API. This assigns the Talkback mic to Echo 1.
#Press the Ext. In button on the Echo 1 module on the API. This brings a mult from Apollo X16 Line Output 15 directly into the Echo 1 module.
#Turn the Echo 1 pot to about 1 o'clock. This is the overall volume level for both the API echo trim pots and the cue faders in your DAW.
#All Echo 1 sends on all API channels go to the Echo 1 module as well.
#Use these individual Echo 1 trims to control the headphone volume of each LIVE instrument.
#'''Make sure to press the PRE button on all the API echo sends on each channel. This allows you to control the headphone level separate from the faders!'''
#Use the Cue faders in your DAW to control the volume of your previously recorded material.
=== '''CUE 2''' ===
#Cue 2 out of your DAW (when using the template) will come out of Apollo X16 Line Output 16.
#Apollo X16 Line Output 16 is normalled to the API Echo 2 Module.
#Turn ON the Echo 2 module on the API.
#Press the TB button on the Echo 2 module on the API. This assigns the Talkback mic to Echo 2.
#Press the Ext. In button on the Echo 2 module on the API. This brings a mult from Apollo X16 Line Output 16 directly into the Echo 2 module.
#Turn the Echo 2 pot to about 1 o'clock. This is the overall volume level for both the API echo trim pots and the cue faders in your DAW.
#All Echo 2 sends on all API channels go to the Echo 2 module as well.
#Use these individual Echo 2 trims to control the headphone volume of each LIVE instrument.
#'''Make sure to press the PRE button on all the API echo sends on each channel. This allows you to control the headphone level separate from the faders!'''
#Use the Cue faders in your DAW to control the volume of your previously recorded material.

← Older revision		Revision as of 01:14, 26 September 2026
Line 29:		Line 29:
	#Use the Cue faders in your DAW to control the volume of your previously recorded material.		#Use the Cue faders in your DAW to control the volume of your previously recorded material.

−	[Category:Audio Lab]	+	[[Category:Audio Lab]]

← Older revision		Revision as of 01:14, 26 September 2026
Line 28:		Line 28:
	#'''Make sure to press the PRE button on all the API echo sends on each channel. This allows you to control the headphone level separate from the faders!'''		#'''Make sure to press the PRE button on all the API echo sends on each channel. This allows you to control the headphone level separate from the faders!'''
	#Use the Cue faders in your DAW to control the volume of your previously recorded material.		#Use the Cue faders in your DAW to control the volume of your previously recorded material.
		+
		+	[Category:Audio Lab]

Headphone Mixes - Audio Lab - Revision history

Wrrt7350 at 01:14, 26 September 2026

Wrrt7350 at 01:14, 26 September 2026

Wrrt7350: Created page with "==Headphone Mixes in the Audio Lab== The '''Audio Lab''' has two independent mono headphone cues that are distributed at line level to several small analog mixers in the studi..."