Difference between revisions of "3D Lab Checklist"
From Help Wiki
(→Checklist) |
(→Checklist) |
||
| Line 5: | Line 5: | ||
# Sign the log book. | # Sign the log book. | ||
| − | + | # Get the materials ready. | |
| − | # Get materials ready | + | # Power on camera and lights. Make sure that the camera is set to '''Manual''' (M). |
| − | + | ||
| − | # Power on | + | |
| − | + | ||
# Power on the computer. | # Power on the computer. | ||
| − | + | # Open '''Dragonframe'''. Make a '''new project''' or open an existing one. | |
| − | # | + | # Set '''Aspect Ratio''' masks. |
| − | + | # Set camera settings with '''Dragonframe''' | |
| − | # | + | #* Focus the lens. |
| − | + | #* Set exposure. | |
| − | # Set camera settings | + | |
| − | * Focus the lens | + | |
| − | * Set exposure | + | |
| − | + | ||
| − | + | ||
# Turn off overhead lights and check for reflections. | # Turn off overhead lights and check for reflections. | ||
| − | + | # Animate your sequence. | |
| − | # Animate your sequence. | + | # [[Exporting - Dragonframe|Export]] |
| − | + | ||
| − | # [[Exporting - Dragonframe|Export]] | + | |
| − | + | ||
# Record your exit time in the log book as you leave. | # Record your exit time in the log book as you leave. | ||
[[Category:Animation Labs]] | [[Category:Animation Labs]] | ||
Revision as of 09:28, 5 October 2016
Checklist
Follow this checklist every time you use the lab.
Look at the 3D Lab Manual article for details on the steps below
- Sign the log book.
- Get the materials ready.
- Power on camera and lights. Make sure that the camera is set to Manual (M).
- Power on the computer.
- Open Dragonframe. Make a new project or open an existing one.
- Set Aspect Ratio masks.
- Set camera settings with Dragonframe
- Focus the lens.
- Set exposure.
- Turn off overhead lights and check for reflections.
- Animate your sequence.
- Export
- Record your exit time in the log book as you leave.
