Difference between revisions of "Library 0406"

Revision as of 14:00, 7 April 2017

LAPTOP: (You may play a DVD through your laptop)

1. You may need to lower the screen using the pull-down cord.
2. Press the ON button to turn on the Data Projector. Projector will take 30 seconds to warm up. ON button will stop blinking when Projector is ready.
3. Select PC/Laptop
4. Locate VGA cable (hanging from hook) and insert VGA cable into VGA input on your laptop. Insert audio mini jack into laptop’s headphone input.
5. Turn on your laptop.
6. Use volume knob (located on black panel on wall) to adjust audio levels

DVD: (You may play a DVD through your laptop)

1. You may need to lower the screen using the pull-down cord.
2. Press the ON button to turn on the Data Projector. Projector will take 30 seconds to warm up. ON button will stop blinking when Projector is ready.
3. Select Video on the Media Control Panel if using the RCA input or press S/Video if using S/Video inputs.
4. Insert the RCA cable from your DVD player into either the composite or S/Video inputs.
5. Turn on DVD player.
6. Use volume knob (located on black panel on wall) to adjust audio levels.

VCR: (You may bring in a VCR)

1. You may need to lower the screen using the pull-down cord.
2. Press the ON button to turn on the Data Projector. Projector will take 30 seconds to warm up. ON button will stop blinking when Projector is ready.
3. Select Video on the Media Control Panel if using the RCA input or press S/Video if using S/Video inputs.
4. Insert the RCA cable from your DVD player into either the composite or S/Video inputs.
5. Turn on VCR player.
6. Use volume knob (located on black panel on wall) to adjust levels.