Difference between revisions of "3D Printers"
From Help Wiki
(→Scheduling) (Tag: VisualEditor) |
|||
| Line 10: | Line 10: | ||
* Media Loan is located at Library 2504 or you can call 360-867-6253. | * Media Loan is located at Library 2504 or you can call 360-867-6253. | ||
* The room is available 24 hours seven days a week but you need to schedule time and checkout the key while Media Loan is open. | * The room is available 24 hours seven days a week but you need to schedule time and checkout the key while Media Loan is open. | ||
| − | * Here | + | * Here are the [http://www.evergreen.edu/medialoan/policies Media Loan Policies] and the [http://www.evergreen.edu/electronicmedia/access scheduling policies]. |
| + | * Use the time that you have scheduled. | ||
* There are late fees for over due keys so return the keys on time. | * There are late fees for over due keys so return the keys on time. | ||
* If you schedule time when the building is closed Media Loan will give you an extra key FOB to open the Library Building exterior door. | * If you schedule time when the building is closed Media Loan will give you an extra key FOB to open the Library Building exterior door. | ||
| Line 16: | Line 17: | ||
===Equipment=== | ===Equipment=== | ||
====Makerbot Replicator 2==== | ====Makerbot Replicator 2==== | ||
| − | * There is one Makerbot Replicator 2 printer in the room | + | * There is one Makerbot Replicator 2 printer in the room. |
** Load you files onto the printer with the SD cards. | ** Load you files onto the printer with the SD cards. | ||
====Lulzbot Mini==== | ====Lulzbot Mini==== | ||
* There is one Lulzbot Mini. | * There is one Lulzbot Mini. | ||
| − | * Load files to it with the Cura application on the computer | + | * Load files to it with the Cura application on the computer in the room. |
====Computer==== | ====Computer==== | ||
* Use Cura with the Lulzbot. | * Use Cura with the Lulzbot. | ||
| Line 46: | Line 47: | ||
* If there are problems with the printer go to the Multimedia Lab or contact [http://www.evergreen.edu/directory/people/kruse-aaron Aaron Kruse] | * If there are problems with the printer go to the Multimedia Lab or contact [http://www.evergreen.edu/directory/people/kruse-aaron Aaron Kruse] | ||
* Do not try to do repairs or maintenance on the printers. | * Do not try to do repairs or maintenance on the printers. | ||
| − | |||
[[Category:Multimedia Lab]] | [[Category:Multimedia Lab]] | ||
Revision as of 14:37, 31 July 2017
Intro
- For the 2016-2017 the 3D printers have been set up in the Library building L1523.
- On the first floor on the Library building walk past the Multimedia Lab and take a left at the garbage/recycling area. There is a sign labeled "24-Hour Suites".
- For more information contact Aaron Kruse
Scheduling
- The 3D Printer room is scheduled at Media Loan or the Multimedia Lab.
- Media Loan is located at Library 2504 or you can call 360-867-6253.
- The room is available 24 hours seven days a week but you need to schedule time and checkout the key while Media Loan is open.
- Here are the Media Loan Policies and the scheduling policies.
- Use the time that you have scheduled.
- There are late fees for over due keys so return the keys on time.
- If you schedule time when the building is closed Media Loan will give you an extra key FOB to open the Library Building exterior door.
Equipment
Makerbot Replicator 2
- There is one Makerbot Replicator 2 printer in the room.
- Load you files onto the printer with the SD cards.
Lulzbot Mini
- There is one Lulzbot Mini.
- Load files to it with the Cura application on the computer in the room.
Computer
- Use Cura with the Lulzbot.
- The Makerbot software is installed if you need to convert files.
- There is a memory card reader for loading files on to SD cards.
Notes
- It OK to prop the door open while printing is you are in the room or in the hallway.
- If you leave the area while printing make sure to close the door.
- Do not leave for more than 15 minutes. The printers can jam and stop printing.
- You'll need to copy the X3G file to the SD card. There is a computer with an memory card reader in the room.
- Make sure that there is enough filament on the spool and that it feeds freely.
- Use the key pad to choose "Build from SD". find the file and print.
- The printer will heat the extruder, draw an initial line and start the print
Problems to Watch for
- Watch the first two layers closely to make sure that they stick to the bed.
- If the first layer fails, cancel the print, clear the bed and try again.
- Watch for print not sticking to the bed.
- Watch for the feed stopping. This often makes a repeating clicking sound and no plastic coming out of the nozzle.
- Continuously check that the filament is feeding off of the spool.
If Things Go Wrong
- If there are problems with the printer go to the Multimedia Lab or contact Aaron Kruse
- Do not try to do repairs or maintenance on the printers.
