Difference between revisions of "APS VariZoom Dolly Track Operating Guide"
From Help Wiki
| (2 intermediate revisions by the same user not shown) | |||
| Line 76: | Line 76: | ||
<div class="col-md-3 sidebar"> | <div class="col-md-3 sidebar"> | ||
| − | {{ | + | {{APS Proficiency Information |
|Testlink= [[APS VariZoom Dolly Track Proficiency Test]] | |Testlink= [[APS VariZoom Dolly Track Proficiency Test]] | ||
| Line 82: | Line 82: | ||
}} | }} | ||
| − | <!-- | + | <!--APS Proficiency Information is the template for the top of the side bar. There is also one for GA called GA Proficiency Information. To edit the proficiency test link, "edit source" for this page for add the proficiency link using the keyword "Testlink"--> |
{{Precautions, Help, and Other Wikis for all Media Loan Gear | {{Precautions, Help, and Other Wikis for all Media Loan Gear | ||
Latest revision as of 15:22, 30 March 2021
Contents
Overview
The VariZoom Dolly Track is a portable, lightweight dolly with specially designed wheels that enable smooth and very quiet operation. It is lightweight and easy to use, but without proper setup and operation, damage to the equipment and/or injury to the user and people around the equipment may occur.
Kit Contents
- 10 Track pieces
- 10 Underpad pieces
- 2 Crossmember pieces
- Folding Dolly
- 3 Claw-Foot Adapters
How to Use It
Step One: Setting up the Track
- Start by connecting the first 2 track pieces with one of the crossmembers
- Add the underpads below the 2 track pieces
- Continue adding track pieces and underpads until you have the desired length
- Connect the final 2 track pieces with the second crossmember
Step Two: Setting up the Dolly
- Unfold the dolly and lock it in place using the knob at the center where the legs come together
- To fit the tripod, adjust the position of the foot locks by loosening the slide lock knobs
- Place the dolly onto the the track
- If the width of the track seems slightly off, adjust the position of the clamps on the end of the crossmembers
Step Three: Attaching the Tripod to the Dolly
- The foot locks can slide along the entire length of the dolly legs to accommodate the footprint of the kit tripod
- Once you have positioned the tripod feet, fix the position by engaging the foot locks and tighten the slide lock knobs and the foot lock knobs
- Depending on your setup, you may want to add a sandbag between the tripod legs to add stability, inertia, and a way smooth out your moves
Operating the Dolly
- Always keep the tracks clear of debris and objects to prevent damage or derailing
- When pushing the dolly-tripod, it's preferable to grab and push at a lower point on the tripod, as this will offer more stable operation
- It is fine to move the dolly-tripod however you want, just be aware that pushing or pulling at the highest point will create the greatest chances of wobbling or tipping
- Take care not to push the dolly off the end of track and over the crossmembers
Media Loan Gear it Connects With Well
See the Media Loan Catalog for more info about the below items.
- The APS Jib is a small crane designed to sit on top of the track to you can have moving shots with smooth and controlled rotational and linear movement.
- Canon Rebel T6i or 6D
- A normal tripod will work if you don't need the jib.
Similar Models at Media Loan
We have a smaller slider track. That a camera mounts to directly to the track. It is also APS.
