Difference between revisions of "Audio Monitoring - Mixing Bench"

Revision as of 14:23, 15 September 2023

Mackie Big Knob Monitor Controller.

The Mackie Big Knob monitor controller box is used to select what audio source to listen to and to adjust the volume.

• The big silver knob is used to set the volume
• Source Select button:
  • A = Apollo x8 audio interface
  • B = Currently not used
• Mono: press down to monitor in mono.
• Mute: turns the volume all the way off.
• Dim: pressing the button lowers the volume by 20dB
• Monitor Select: Leave set to A. The up position.

Speaker Levels

There is a Mackie Big Knob volume control box to the left of the iMac

1. Start with the output level down
   • The silver knob is turned all the way to the left
2. Set the Source Select button to A to select the MOTU 828 output.
3. Start playing sound in an application.
4. Slowly turn the silver knob to the right to increase the volume.

Headphone Levels

Headphones can be connected to the front of the MOTU 828

There is a small headphone volume knob above the headphone jack on the MOTU 828

1. Turn the silver output level down on the Mackie Big Knob volume control box  
   • The knob is turned all the way to the left
2. Turn the headphone volume down
   • The is knob turned all the way to the left
3. Connect headphones to the headphone jack on the MOTU 828
4. Slowly turn the headphone volume knob to the right to increase the volume