Difference between revisions of "3D Lab Checklist"

Latest revision as of 12:14, 2 October 2024

Follow this checklist every time you use the lab.

Look at the 3D Lab Manual article for details on the steps below

@@ Line 4: / Line 4: @@
 Look at the [http://wikis.evergreen.edu/computing/index.php/3D_Lab_Manual 3D Lab Manual]  article for details on the steps below
-.	Sign the log book.
+# Sign the log book.
+# Get the materials ready.
-.	Get materials ready
+# Power on camera and lights. Make sure that the camera is set to '''Manual''' (M).
+# Power on the computer.
-.	Power on both the camera and lights. Make sure that the camera is set to Manual (M).
+# Open '''Dragonframe'''.  Make a '''new project''' or open an existing one.
+# Set '''Aspect Ratio''' masks.
-.	Power on the computer.
+# In the DMX window set up bash light and the DMX lights.
+# Turn off overhead lights and check for reflections.
-.	Open Dragonframe, make a '''new project''' or open an existing one.
+# Set camera settings with '''Dragonframe'''
+#* Focus the lens.
-.	Set Aspect Ratio masks.
+#* Set exposure.
+# Animate your sequence.
-.	Set camera settings with Dragonframe
+# [[Exporting - Dragonframe|Export]]
-*	Focus the lens
+# Back up your files
-*	Set exposure
+# Record your exit time in the log book as you leave.
-.	Turn off overhead lights and check for reflections.
-.	Animate your sequence.
-.	[[Exporting - Dragonframe|Export]].
-. Record your exit time in the log book as you leave.
 [[Category:Animation Labs]]