Difference between revisions of "Audio Lab Surround Sound Settings"

Latest revision as of 18:01, 18 February 2026

Power on O2R mixing console (Tripp Lite main power bar located on the right side of desk)
On the O2R find Scene Memory > Use the up or down arrow buttons to find "03 surround mix" > Press Recall
this assigns the inputs 25 - 30 to bus 1 - 6 (omni outputs to surround sound)
In the "LAYER" section, press 25-48 button, faders 25 - 31 should be up to unity 0, this recieves audio from the MOTU sound cards via Digital Performer
In the "LAYER" section, press the MASTER button, ALL BUS faders should be up to unity 0, these outputs go to the Surround Monitor Controller
pan is disabled in the routing page

@@ Line 1: / Line 1: @@
-=== Programming Surround Sound Settings for Digital Performer and the Yamaha O2R96 ===
+__NOTOC__
-[[File:5 1.png|300px|right|]]
+==Load the O2R surround sound scene==
-Load the O2R surround sound scene
+# Power on O2R mixing console (Tripp Lite main power bar located on the right side of desk)
-# Power on O2R mixing console
+# On the O2R find Scene Memory > Use the up or down arrow buttons to find "03 surround mix" > Press Recall
-# Scene Memory > Select "03 surround mix > Recall
+# this assigns the inputs 25 - 30 to bus 1 - 6 (omni outputs to surround sound)
+# In the "LAYER" section, press 25-48 button, faders 25 - 31 should be up to unity 0, this recieves audio from the MOTU sound cards via Digital Performer
+# In the "LAYER" section, press the MASTER button, ALL BUS faders should be up to unity 0, these outputs go to the Surround Monitor Controller
+# pan is disabled in the routing page
+===SPL surround controller===
+# Select A surround
+# Press the 6 X 5.1 surround monitor push buttons
+# Turn on Adam speakers
+# Turn up volume
-Setting surround sound bundles in Digital Performer
+[[Category:Audio Lab]]
-# Open up your DP project
-# DP Menu > Studio > Bundles (shift - U)
-# Select the Outputs tab
-# Select the list of outputs under NAME and DELETE them.
-# Select the ADD option at the right bottom of the window
-# Under MODEL, change it to 5.1
-# Close bundles window
-===Assign the outputs of your tracks===
-[[Category:Audio Studios]]