Difference between revisions of "Audio Lab Surround Sound Settings"

From Help Wiki
(→‎SPL surround controller)
 
(16 intermediate revisions by 3 users not shown)
Line 1: Line 1:
−
===Load the O2R surround sound scene===
+
__NOTOC__
−
# Power on O2R mixing console
+
==Load the O2R surround sound scene==
−
# Scene Memory > Select "03 surround mix > Recall
+
# Power on O2R mixing console (Tripp Lite main power bar located on the right side of desk)
 +
# On the O2R find Scene Memory > Use the up or down arrow buttons to find "03 surround mix" > Press Recall
 
# this assigns the inputs 25 - 30 to bus 1 - 6 (omni outputs to surround sound)
 
# this assigns the inputs 25 - 30 to bus 1 - 6 (omni outputs to surround sound)
 +
# In the "LAYER" section, press 25-48 button, faders 25 - 31 should be up to unity 0, this recieves audio from the MOTU sound cards via Digital Performer
 +
# In the "LAYER" section, press the MASTER button, ALL BUS faders should be up to unity 0, these outputs go to the Surround Monitor Controller
 
# pan is disabled in the routing page
 
# pan is disabled in the routing page
−
 
−
===Setting surround sound bundles in Digital Performer===
 
−
[[File:5 1.png|300px|right|]]
 
−
# Open up your DP project
 
−
# DP Menu > Studio > Bundles (shift - U)
 
−
# Select the Outputs tab
 
−
# Select the list of outputs under NAME and DELETE them.
 
−
# Select the ADD option at the right bottom of the window
 
−
# Under MODEL, change it to 5.1
 
−
# Close bundles window
 
−
 
−
===Assign the outputs of your DP tracks===
 
−
# Highlight all your tracks that you want mixed to 5.1
 
−
# Menu > Studios > Audio Assignments > Assign all selected tracks to this output > choose "analog 1 - 6"
 
  
 
===SPL surround controller===
 
===SPL surround controller===
Line 25: Line 14:
 
# Turn up volume
 
# Turn up volume
  
−
 
+
[[Category:Audio Lab]]
−
 
+
−
 
+
−
 
+
−
[[Category:Audio Studios]]
+

Latest revision as of 18:01, 18 February 2026

Load the O2R surround sound scene

  1. Power on O2R mixing console (Tripp Lite main power bar located on the right side of desk)
  2. On the O2R find Scene Memory > Use the up or down arrow buttons to find "03 surround mix" > Press Recall
  3. this assigns the inputs 25 - 30 to bus 1 - 6 (omni outputs to surround sound)
  4. In the "LAYER" section, press 25-48 button, faders 25 - 31 should be up to unity 0, this recieves audio from the MOTU sound cards via Digital Performer
  5. In the "LAYER" section, press the MASTER button, ALL BUS faders should be up to unity 0, these outputs go to the Surround Monitor Controller
  6. pan is disabled in the routing page

SPL surround controller

  1. Select A surround
  2. Press the 6 X 5.1 surround monitor push buttons
  3. Turn on Adam speakers
  4. Turn up volume
Retrieved from "http://helpwiki.evergreen.edu/wiki/index.php?title=Audio_Lab_Surround_Sound_Settings&oldid=47898"

The Evergreen State College