Difference between revisions of "Duplex Printing"

Latest revision as of 11:17, 13 September 2007

To enable double sided printing (or check if it is enabled) you need to check some options under print.

Go to the File menu
Select Print
From the dialogue box that shows up, select Properties
Select the Finishing tab from the group of tabs at the top of the dialogue box
To enable double sided (duplex) printing, make sure the box for "print on both sides" is checked.
Click ok
If you are ready to print, click ok again, otherwise click cancel

Go to the File menu
Select Print
From the bottom drop down menu, select Layout
Select if you wish to print long edged double-sided (like a book), short edge, or not at all (off)

@@ Line 1: / Line 1: @@
-'''Printing on both sides of the page'''
+==Printing on both sides of the page==
-Most if not all of the laser printers have a duplex option to print on both sides of the page. It should be on the menu of Options in your print dialogue box (under Layout on my Mac OSX). They also have a draft option that uses less toner and works just fine for most purposes. (EconoMode - Save Toner under Image Quality on my particular menu.) On a Mac, you should be able to [[save these two choices as a Preset option]] that you can choose off a menu in one step if you want to, rather than having to go through setting the choices up again every time. In Windows, you need to [[select alternate printer options]] each time you print.
+To enable double sided printing (or check if it is enabled) you need to check some options under print.
+===On a PC===
+#Go to the File menu
+#Select Print
+#From the dialogue box that shows up, select Properties
+#Select the Finishing tab from the group of tabs at the top of the dialogue box
+#To enable double sided (duplex) printing, make sure the box for "print on both sides" is checked.
+#Click ok
+#If you are ready to print, click ok again, otherwise click cancel
+===On a Mac===
+#Go to the File menu
+#Select Print
+#From the bottom drop down menu, select Layout
+#Select if you wish to print long edged double-sided (like a book), short edge, or not at all (off)
+[[Category:Printing]]