Difference between revisions of "Canon 6D Gear Guide"

From Help Wiki
(→‎VIDEO SETTINGS)
 
(125 intermediate revisions by 11 users not shown)
Line 1: Line 1:
−
=INTRODUCTION=
+
{{Media Loan Covid Message}}
  
−
The Canon EOS 6D is the world's smallest and lightest full-frame DSLR. It features a 20.2 Megapixel Full-Frame CMOS sensor, a wide ISO range of 100-25600 for incredible image quality even in low light, and a DIGIC 5+ Image Processor delivers enhanced noise reduction and exceptional processing speed. A new 11-point AF including a high-precision center cross-type AF point with EV -3 sensitivity allows focusing in extreme low-light conditions, and with continuous shooting up to 4.5 fps, you are ready to capture fast action. Full HD video with manual exposure control, multiple frame rates, and the benefits of a Full-Frame sensor provides stunning performance and creative flexibility.
+
<div class="container-fluid">
  
−
APS has two complete Canon 6D kits that are setup for utilizing the advanced video functions of the camera. The kits include a shoulder mount rig with follow focus and viewfinder. The kits also include f/1.5 24mm, 35mm, and 85mm cine lenses with geared aperture and focus rings. There are 2 variable Neutral Density Filters to allow for using slow shutter speeds and wider apertures in brightly lit areas. Each kit contains 2 batteries and a plug in power supply for the camera. <br />
+
<div class="row">
−
Canon has some great tutorial videos on the [http://learn.usa.canon.com/galleries/galleries/tutorials/eos_6d_tutorials.shtml Canon] website.
+
 
 +
<div class="col-md-8">
 +
 
 +
<div class="lead">
 +
 
 +
<div class="lead">[[File:Media Loan Logo.png|left|frameless|90x90px]]A high quality camera that can take high resolution photos. </div>
 +
{{#ev:vimeo|159256566|800|center}}
 +
<div class="pull-right"></div>
 +
 
 +
</div>
 
   
 
   
 +
==Overview==
 +
 +
This is a basic guide for the Canon 6D which any student can use because it is Media Loans "General Access". You first need to be proficient with the Canon Rebel camera and take the proficiency for this item follow the link in the righthand sidebar. The 6d is a Full-Frame Camera and capable of taking very high quality digital photos and video.
 +
[[File:6d_1.jpg|600x600px|center]]
 +
==Kit Contents==
 +
[[File:diagram_1.png|250px|right|thumb]]
 +
[[File:diagram_2.png|250px|right|thumb]]
 +
*1x camera body
 +
*1x 1:4 24-105mm lens
 +
* 1x remote kit
 +
* 1x battery grip
 +
* 1x battery charger
 +
* 1x class 10 memory card
 +
* 3x batteries
 +
 +
==How to Use It==
 +
 +
===Quick Exposure Settings Guide===
 +
 +
There are multiple ways to adjust the shutter speed, ISO and aperture settings on the 6D. Exposure settings are shown on the bottom of the viewfinder, the bottom of the LCD screen in live view mode, and on the top right panel display. '''In the APS 6D kit, aperture can only be adjusted with a ring on the manual lenses.'''
 +
# Q Menu: The most familiar way to adjust these is through the Quick selection button, Q.  This can only be activated in photo mode when live view is off.  Once activated, you can scroll through and adjust each setting accordingly. 
 +
# Exterior buttons: In either photo or video mode, with or without live view, there are exterior exposure button controls. The circular quick control dial changes the aperture and the top main dial changes the shutter speed.  To adjust the ISO, turn the top dial while holding down the top ISO button.
 +
 +
===Lenses===
 +
 +
EF-S Mount lenses ''cannot'' be used with the 6D.  The back of EF-S lenses extends too far back into the camera body and could damage the mirror or sensor.  ONLY USE EF LENSES WITH THE 6D.  All of the EF-S lenses at Media Loan are noted as such on their case, as well as on the lens itself.  If you want to use any lenses other than the lens(es) that come with the kit, you need to check with the Media Loan staff.
 +
 +
===FRONT CONTROLS===
 +
====Depth-of-Field Preview button====
 +
[[File:depth_preview.png]]
 +
 +
<p align "right">This button is located on the opposite side of the lens release. Press this button to preview what will actually be in focus as determined by the set aperture. The viewfinder will probably get much darker, and current settings will also be displayed near the bottom. You can program this button to do other things in the C.Fn. menu. (p. 147)</p>
 +
 +
====Lens Release Button====
 +
To remove a lens, press the lens release button and twist the body of the lens until the red dot is on top. Now pull the lens straight out. To attach a lens, line-up the lens' red dot to the red dot on the front of the top of the lens mount, push it straight in, and twist so the red dot is as shown above. You'll hear a click, and your lens is locked-in.
 +
 +
===TOP CONTROLS===
 +
 +
[[file:6d_2.jpg|400px|left|thumb|Canon 6D Top Controls]]
 +
Most of these adjustments can also be made with even more detail in the MENUs or with the QUICK [ Q ] CONTROL SCREEN. The power switch is on top, a new place not familiar to old-time Canon shooters.
 +
====Exposure Mode (Top left knob)====
 +
Use this knob to set the exposure mode. Use M for full manual mode.  The other settings will have some automatic features, depending on the mode you select.
 +
====Top Main Dial====
 +
The top, or front, dial sets many things. While shooting, it alters the exposure program (in P) or the aperture (Av mode), or the shutter speed (M or Tv modes). While playing, it usually jumps ahead or behind by 10 frames. You can set this in the playback menu. While zoomed in playback, it changes the zoom magnification.
 +
 +
====AF Mode====
 +
The Lenses in the APS VIDEO KIT are manual lenses and '''DO NOT''' work with Auto Focus, but the general access lenses do. The AF system is easy, and well-set right out of the box. With most lenses, hold the camera's AF-ON button to lock autofocus after it's focused the first time. These setting apply only to real (through the viewfinder) shooting. For movies or Live View (image seen on the rear screen while shooting) settings, see the Live View Menu.
 +
 +
You select between autofocus and manual focus with the switch on your lens. They're always in this same spot, regardless of the lens. It falls right under your thumb while shooting.
 +
 +
====Drive====
 +
DRIVE sets whether the 6D shoots continuously or not, and sets the self timer and remote control options. Press the DRIVE button and move the top dial to change the drive mode. The settings are:<br />
 +
 +
[[file:6d_drive.png]]
 +
 +
====ISO (sensitivity to light)====
 +
ISO sets the 6D's sensitivity to light. 100 is normal, and 6,400 or higher is much more sensitive for very low light. The higher the ISO, the more noise there will be in your image. Try to keep the ISO as low as possible. To adjust ISO, press ISO and turn the top dial.
 +
 +
====Metering====
 +
Use the following chart to determine which metering mode you should use.  Change the metering mode by pressing the meter button above the top LCD panel. <br />
 +
 +
[[file:6d_meter.png]]
 +
 +
====LCD Dial Light====
 +
This one's easy: tap it and the 6D lights up the top LCD in amber so you can see what you're doing.
 +
 +
===REAR CONTROLS===
 +
[[File:6d_3.jpg|400px|left|thumb|Canon 6D Rear View]]
 +
 +
====MENU Button====
 +
The MENU button (top left rear) is the key to most of the detailed settings (see notes below).
 +
====INFO Button====
 +
Press the INFO button (next to the MENU button) with the 6D idle (tap the shutter to wake it from sleep to idle) and you'll see: Data Screen (blue and white text). Here you'll see a big list of random facts and figures. The most useful is telling you the date and time, and how much card memory you have left. If you call up this screen with the INFO button, it doesn't go away. To make this data screen go away, you have to press INFO again. Pressing INFO multiple times will display an electronic level.
 +
 +
====Diopter Control====
 +
This is the little wheel above the rubber eyepiece. Turn it until the finder displays become sharp. It can get knocked as you use the 6D, so if your finder gets blurry, readjust it.
 +
====Photo/Video Lever====
 +
To switch between movie and photo mode, turn the lever to the proper selection. For movies, you have to see the image on the rear screen to see what you're doing; you can't shoot them while looking through the optical finder. Turn the lever back to the silver camera icon to stop the rear screen display and return to still shots.
 +
 +
====Start/Stop (Live View)====
 +
For Live View (seeing the picture on the rear LCD screen before you take it), turn the lever to your desired mode. Then press START/STOP to start and stop the rear display. Live View uses a lot of battery power. This button is also used to start/stop video recording.
 +
 +
====AF-ON Button====
 +
The AF-ON button can do different things, as programmed in the menus. See Canon AF Settings for more.
 +
====Exposure-Lock (AEL or *) Button====
 +
The AE Lock button, curiously only marked as an asterisk (*), locks exposure. Once pressed, you'll also see an asterisk in your finder to let you know you've locked exposure. Hitting it again won't unlock the exposure; it simply relocks it again to a new value. There's no easy way to unlock this other than by taking the picture, changing the exposure mode, or letting the camera go to sleep.
 +
====AF-Area Mode Button====
 +
The AF-Area mode button, marked as [-|-], lets us select which of the 6D's 9 AF sensors are used, or set the 6D to use them all automatically.
 +
====Magnification Button====
 +
The magnification button, marked as a blue magnifying glass, lets you magnify or reduce the image(s) seen on the rear LCD screen. During playback, press the button and use the top dial to control how far you zoom in. Turned the other way, the top dial also lets you see many smaller images on the screen at once. It also works during Live View and Movie shooting. during Live View and Movie shooting, press the button a few times to cycle among the various magnifications.
 +
====Play Button====
 +
You know what the play button does. It also brings an image back to full-screen if it's been zoomed-in.
 +
====The Quick Control [Q] Button====
 +
The Quick Control [Q] button is one of the most useful buttons on the 6D, besides the shutter button. Press the [Q] and a screen loaded with settings appears. To change these settings once you get this screen, use the Master Controls to drive around, and the dial to change the setting. If you need more details about what you're setting, press the SET button again. There's no need to press OK or DONE or EXIT. The instant you've changed something, it's done. You can read and set apertures and shutter speeds on this screen, but in manual exposure mode, there is no indication for the correct exposure. For manual exposure, look at the bar graph in the finder or on the old top LCD. If you tap the INFO button, you'll call up the very similar INFO screen, which does drive the bar graph to let you set read manual exposure, but you'll have to set the shutter and aperture with the dials, not from the screen.
 +
====Master Controls====
 +
The master controls are what we use to juggle all the other settings. These include: the set button, the multi-controller, and quick control dial. The '''SET''' button can be programmed in the menus, and makes the 6D do whatever you just set it to do. It also selects the center or all AF points when you're setting the AF-area modes. Around the SET button is a directional control ring, called the '''multi-controller'''. It works in four directions when playing in the menus, and during zoomed playback, lets you scroll around in eight directions. Around the directional controller is the big '''quick control dial'''. It can be used to control many things. During shooting, the big rear dial is very important as it changes exposure compensation. During menus and playback the big rear dial also does a lot; try it and see. During manual exposure, it also sets the aperture. The '''LOCK''' switch only prevents the rear dial from changing the exposure compensation (or aperture in manual exposure). It doesn't lock anything else, or any other functions (like menu or playback control) of the rear dial. We can change what the LOCK switch does in the C.Fn. menu.
 +
 +
====Delete Button====
 +
This is for deleting pictures. Press it, and use the master controls above to select ERASE and then press SET to delete the picture you're playing.
 +
 +
===MENU SETTINGS===
 +
Access the MENU to change various camera system settings, such as video/photo resolution and formats.  The MENU is organized into various tabs.  You can access the video settings in the MENU when the camera is set to video mode, and the photography settings when the camera is set to photo mode. <br />
 +
 +
'''Notes on settings:'''
 +
====Movie Rec. Size====
 +
'''IPB''' Choose IPB for normal use. The video looks the same as ALL-I below, and take up much less space. <br />
 +
 +
'''ALL-I''' Choose ALL-I only when you have huge data storage resources and need excruciating precision in frame-by frame editing for theatrical release. ALL-I is intended for the editing needs of professional tele-production and motion picture production, not for consumer use.
 +
 +
====Format card====
 +
Format the memory card before returning your camera to Media Loan.  This not only clears it for the next user, but it also ensures protection of your work.  Make sure to transfer the files off of the card before you format.  Select “low level format” to completely clear the information (without low level format, your data will be retrievable by certain computer programs).
 +
 +
====Video system====
 +
This sets the analog video output to NTSC (Never The Same Color) or PAL (Problems Are Lurking). It should be set according to your country and not need adjustment. Use NTSC in the USA and Japan, and PAL in Europe.
 +
 +
==== Custom White Balance ====
 +
Custom white balance enables you to manually set the white balance for a specific light source for better accuracy. Perform this procedure under the actual light source to be used.
 +
 +
'''Photograph a white object.'''
 +
* The plain, white object should fill the spot metering circle.
 +
* Focus manually and set the standard exposure for the white object.
 +
* You can have have any white balance set for initial photograph--AWB, daylight, etc.
 +
<br />
 +
'''Select Custom White Balance in the menus.'''
 +
* Under the second camera sub menu, select Custom White Balance, then press set.
 +
* The photo you took should appear and then select OK and this white balance data will be imported.
 +
* When the menu reappears, press the MENU button to exit the menu.
 +
<br />
 +
'''Make sure you are on the custom white balance setting.'''
 +
* Press the WB button or the Quick Menu and select custom white balance and press set.
 +
<br />
 +
[[File:Media Loan Custom White Balance.png|none|thumb|100x100px]]
 +
 +
===REMOTE===
 +
The General Access kit comes with a remote, and there is multiple ways to use it. With this remote, 6D does not need to be in "remote" drive mode.
 +
 +
Steps for usage:
 +
# Set the remote and receiver to the same channel.  On each, remove the battery cover and flip the switch up to a matching channel (typically ch. 1).  '''These must match'''.
 +
# Plug the receiver into the corresponding input on the left side of the camera body.
 +
# Power on the receiver and the camera.
 +
# The shooting mode can be selected with the remote as well as the camera. The most direct way to use the remote is to set the camera to single shooting drive mode, and then use the remote to select your actual desired mode (single, continuous, BULB, and timer). The BULB function can be used two ways: two take quick, continuous shots (set the remote to bulb and the drive mode on the camera to continuous) and to take long exposures (set the remote to bulb and the exposure mode on the camera to BULB).  In both uses, press the remote button one to start shooting and again to stop.
 +
# If set to AF, hold the main button on the remote down halfway to focus.  Press down all the way to take a picture in single shooting and timer modes.  In burst mode, keep the button pressed to take multiple shots.  In BULB, press the button once to open the shutter and a second time to close it.
 +
# After a picture is take, you can hold the remote button halfway down again for a quick preview.
 +
 +
==Troubleshooting==
 +
 +
See [[Troubleshooting Media Equipment]] Guide for general information.
 +
 +
 +
==Media Loan Gear it Connects With Well==
 +
 +
{{Collapsed|
 +
 +
See the [[Media Loan Catalog]] for more info about the below items.
 +
 +
* EF Lenses
 +
* Tripods and other stabilizers
 +
* Flashes
 +
 +
}}
 +
 +
==Similar Gear at Media Loan==
 +
 +
If you have access to APS gear, we have 6d kits for video production specifically with 3 cine lenses included
 +
<!-- Technical note for source editors: end col-md-8 --> 
 +
 +
</div>
 +
 +
<div class="col-md-1"></div>
 +
 +
<div class="col-md-3 sidebar">
 +
 +
{{APS Proficiency Information
 +
 +
|Testlink= [https://helpwiki.evergreen.edu/wiki/index.php/Canon_6D_Proficiency_Test GA Canon 6D proficiency test]
 +
 +
}}
 +
 +
<!--GA Proficiency Information is the template for the top of the side bar. There is also one for APS called APS Proficiency Information. To edit the proficiency test link, "edit source" for this page for  for the keyword "Testlink"-->
 +
{{Precautions, Help, and Other Wikis for all Media Loan Gear
 +
 +
|Exceptions= 
 +
 +
*'''For This Gear Specifically'''
 +
**Don't mount an EF-S Lens onto the body, use EF instead
 +
**Don't Point camera toward Sun
 +
**Don't leave this camera near a strong magnetic field
 +
**Don't use a blow dryer to blow dust from the camera
 +
**Keep the Camera with the case, we have a limited amount of 6D and although it looks hardy, it is delicate.
 +
}}
 +
 +
<!--Precautions, Help, and Other Wikis for all Media Loan Gear is the template for the bottom of the sidebar. To edit the precautions for this gear specifically, "edit source" for this page for the keyword "Exceptions". be sure to write in the title for the exceptions similar to the title for what they all have.-->
 +
 +
<!-- Technical note for source editors: end col-md-3-->
 +
 +
</div>
  
 +
<!-- Technical note for source editors: end row-->
 +
</div>
  
−
==CARING FOR THE CANON 6D==
+
<!-- Technical note for source editors: end container-->
−
APS has a very limited number of Canon 6D cameras. We appreciate your help in caring for this item to insure its long-term use at Evergreen.
+
</div>
  
−
'''DO NOT''':<br>Drop this camera<br>Point camera toward Sun.<br>Submerge this camera in water<br>Leave this camera near a strong magnetic field!<br>Leave this camera in excessive heat, such as a car<br>Store this camera in excessive heat or cold<br>Use a blow dryer to blow dust from the camera<br>Store this camera in a location where there may be corrosive chemicals<br>Use excessive physical force<br>Please be gentle with this camera; it looks hardy, but it's delicate!
+
<!-- Technical note for source editors: Generator=Template:TwoColumn -->  
  
−
=VIDEO SETTINGS=
+
__NOEDITSECTION__
−
 
+
[[category:APS Gear Guides]]
−
There are two VIDEO menus: '''MOVIE •''' and '''MOVIE ••'''<br />
+
−
You get to these by turning the '''Live View''' lever down to the '''MOVIE''' icon, press '''MENU''' and click to the two movie camera icons to the right of the first four '''CAMERA''' icons.<br />
+
−
These settings apply only to VIDEO shooting, and only appear when the 6D is in MOVIE mode. To get to the Live View menu, you do the same thing, but instead move the Live View lever up to the Live View icon, which then replaces these Movie menus with Live View menus.<br />
+
−
These settings apply only to VIDEO shooting.<br />
+
−
==MOVIE •==
+
−
===Live View Shoot===
+
−
This is set to '''ENABLE''' by default. Set it to '''DISABLE '''if you don't want Live View popping up if you hit the '''LIVE VIEW''' button by accident.
+
−
===AF Method===
+
−
This set how autofocus works, only while in Movies.
+
−
===Silent LV Shoot===
+
−
These are different ways to attempt to make the 6D work more quietly as you shoot. Try the different modes if you're curious.
+
−
===Metering Timer===
+
−
This sets how long the light meter stays on.
+
−
==MOVIE ••==
+
−
===Grid display===
+
−
This allows you to place a rectangular grid over the image on the rear LCD as a help in keeping the camera level.
+
−
===Movie Rec. Size===
+
−
This is where you set resolution, frame rate and compression scheme. The higher the resolution or frame rate, or if you choose '''ALL-I''', the bigger your files.
+
−
===Resolution===
+
−
'''1920''' Choose 1920 (1,920 x 1,080) for subjects of nature, landscapes, cityscapes ,wildlife. theatrical release, and theatrical productions.<br />
+
−
'''1280''' Choose 1,280 (1,280 x 720) for sports video. It has smoother motion and is better if you want to convert it to slow motion later. Contrary to what Japanese makers pitch for selling TVs, 1,280/60 has the same resolution, and uses the same amount of data as 1,920/30. This is because 1,280/60 has higher temporal (time or motion resolution), while 1,920/30 has higher spatial (left-right/up-down) resolution instead. 1,280 is better for sports, and 1,920 is better for drama — each has the same total resolution.
+
−
===Frame Rates===
+
−
'''24''' Choose the [24] options for theatrical release. They are really 23.976 fps. Also choose them for movies that look like movies instead of just video. Another advantage of 23.976 is that it's easy to down-convert it later to NTSC and to PAL, from the same file.<br />
+
−
'''30 and 60''' Choose [30] or [60] for NTSC-based (American, Japan, Korea, etc.) TV release. It's really 29.97 progressive or 59.94 interlaced fps.<br />
+
−
'''50''' Choose 50 for PAL-based (Europe, China, Australia, Russia etc.) TV release.<br />
+
−
===Compression Scheme===
+
−
'''IPB''' Choose IPB for normal use. The video looks the same as ALL-I below, and take up much less space. IPB video files take much less space because the video is stored taking advantage of the fact that most frames have a lot of repetition from one frame to the next. IPB is far more efficient than ALL-I because it takes advantage of often storing only the changes from one frame to the next, not needing to save all the data of every frame if parts of it were the same as the frame before. Since movies have frames that are pretty much the same from one instant to the next, IPB is a very efficient way of storing video that looks great.<br />
+
−
'''ALL-I''' Choose ALL-I only when you have huge data storage resources and need excruciating precision in frame-by frame editing for theatrical release. ALL-I is intended for the editing needs of professional tele-production and motion picture production, not for consumer use. ALL-I stores each and every frame individually and in its entirety, even if most of it was the same as the frame before. ALL-I takes no advantage of the fact that most frames are very similar to the frames that came before them. Stored as ALL-I, your file has to save all of every frame, even when the background and 90% of each frame is exactly the same as the frame before it. The only real technical reason for ALL-I is that each frame is separate, so if you need to cut out and use just three frames, that all three frames are available to cut-out and use separately, while in IPB recording, most recorded frames depend to some extent on the frames before and after them to define themselves. Even shot IPB, there are still a few I (individual) frames recorded every second, and editing software recreates the entire video stream from the I, P and B frames before you start to edit.
+
−
===Sound Recording===
+
−
This is the recording level control. Leave it at AUTO, or you may set it manually. Here you also may select a low-cut (wind) filter, and an attenuator. The low-cut (wind) filter only applies with the built-in microphone.
+
−
===Time Code===
+
−
This lets you professionals set-up time code to your preferences. You even can set drop frame or NDF.
+
−
===Video Snapshot===
+
−
This is a corny feature to create a series of video clips of a few seconds each. '''Ignore it.'''
+
−
[[Category:Media Loan]]
+

Latest revision as of 11:27, 24 August 2023


Media Loan Logo.png
A high quality camera that can take high resolution photos.

Overview

This is a basic guide for the Canon 6D which any student can use because it is Media Loans "General Access". You first need to be proficient with the Canon Rebel camera and take the proficiency for this item follow the link in the righthand sidebar. The 6d is a Full-Frame Camera and capable of taking very high quality digital photos and video.

6d 1.jpg

Kit Contents

Diagram 1.png
Diagram 2.png
  • 1x camera body
  • 1x 1:4 24-105mm lens
  • 1x remote kit
  • 1x battery grip
  • 1x battery charger
  • 1x class 10 memory card
  • 3x batteries

How to Use It

Quick Exposure Settings Guide

There are multiple ways to adjust the shutter speed, ISO and aperture settings on the 6D. Exposure settings are shown on the bottom of the viewfinder, the bottom of the LCD screen in live view mode, and on the top right panel display. In the APS 6D kit, aperture can only be adjusted with a ring on the manual lenses.

  1. Q Menu: The most familiar way to adjust these is through the Quick selection button, Q. This can only be activated in photo mode when live view is off. Once activated, you can scroll through and adjust each setting accordingly.
  2. Exterior buttons: In either photo or video mode, with or without live view, there are exterior exposure button controls. The circular quick control dial changes the aperture and the top main dial changes the shutter speed. To adjust the ISO, turn the top dial while holding down the top ISO button.

Lenses

EF-S Mount lenses cannot be used with the 6D. The back of EF-S lenses extends too far back into the camera body and could damage the mirror or sensor. ONLY USE EF LENSES WITH THE 6D. All of the EF-S lenses at Media Loan are noted as such on their case, as well as on the lens itself. If you want to use any lenses other than the lens(es) that come with the kit, you need to check with the Media Loan staff.

FRONT CONTROLS

Depth-of-Field Preview button

Depth preview.png

This button is located on the opposite side of the lens release. Press this button to preview what will actually be in focus as determined by the set aperture. The viewfinder will probably get much darker, and current settings will also be displayed near the bottom. You can program this button to do other things in the C.Fn. menu. (p. 147)

Lens Release Button

To remove a lens, press the lens release button and twist the body of the lens until the red dot is on top. Now pull the lens straight out. To attach a lens, line-up the lens' red dot to the red dot on the front of the top of the lens mount, push it straight in, and twist so the red dot is as shown above. You'll hear a click, and your lens is locked-in.

TOP CONTROLS

Canon 6D Top Controls

Most of these adjustments can also be made with even more detail in the MENUs or with the QUICK [ Q ] CONTROL SCREEN. The power switch is on top, a new place not familiar to old-time Canon shooters.

Exposure Mode (Top left knob)

Use this knob to set the exposure mode. Use M for full manual mode. The other settings will have some automatic features, depending on the mode you select.

Top Main Dial

The top, or front, dial sets many things. While shooting, it alters the exposure program (in P) or the aperture (Av mode), or the shutter speed (M or Tv modes). While playing, it usually jumps ahead or behind by 10 frames. You can set this in the playback menu. While zoomed in playback, it changes the zoom magnification.

AF Mode

The Lenses in the APS VIDEO KIT are manual lenses and DO NOT work with Auto Focus, but the general access lenses do. The AF system is easy, and well-set right out of the box. With most lenses, hold the camera's AF-ON button to lock autofocus after it's focused the first time. These setting apply only to real (through the viewfinder) shooting. For movies or Live View (image seen on the rear screen while shooting) settings, see the Live View Menu.

You select between autofocus and manual focus with the switch on your lens. They're always in this same spot, regardless of the lens. It falls right under your thumb while shooting.

Drive

DRIVE sets whether the 6D shoots continuously or not, and sets the self timer and remote control options. Press the DRIVE button and move the top dial to change the drive mode. The settings are:

6d drive.png

ISO (sensitivity to light)

ISO sets the 6D's sensitivity to light. 100 is normal, and 6,400 or higher is much more sensitive for very low light. The higher the ISO, the more noise there will be in your image. Try to keep the ISO as low as possible. To adjust ISO, press ISO and turn the top dial.

Metering

Use the following chart to determine which metering mode you should use. Change the metering mode by pressing the meter button above the top LCD panel.

6d meter.png

LCD Dial Light

This one's easy: tap it and the 6D lights up the top LCD in amber so you can see what you're doing.

REAR CONTROLS

Canon 6D Rear View

MENU Button

The MENU button (top left rear) is the key to most of the detailed settings (see notes below).

INFO Button

Press the INFO button (next to the MENU button) with the 6D idle (tap the shutter to wake it from sleep to idle) and you'll see: Data Screen (blue and white text). Here you'll see a big list of random facts and figures. The most useful is telling you the date and time, and how much card memory you have left. If you call up this screen with the INFO button, it doesn't go away. To make this data screen go away, you have to press INFO again. Pressing INFO multiple times will display an electronic level.

Diopter Control

This is the little wheel above the rubber eyepiece. Turn it until the finder displays become sharp. It can get knocked as you use the 6D, so if your finder gets blurry, readjust it.

Photo/Video Lever

To switch between movie and photo mode, turn the lever to the proper selection. For movies, you have to see the image on the rear screen to see what you're doing; you can't shoot them while looking through the optical finder. Turn the lever back to the silver camera icon to stop the rear screen display and return to still shots.

Start/Stop (Live View)

For Live View (seeing the picture on the rear LCD screen before you take it), turn the lever to your desired mode. Then press START/STOP to start and stop the rear display. Live View uses a lot of battery power. This button is also used to start/stop video recording.

AF-ON Button

The AF-ON button can do different things, as programmed in the menus. See Canon AF Settings for more.

Exposure-Lock (AEL or *) Button

The AE Lock button, curiously only marked as an asterisk (*), locks exposure. Once pressed, you'll also see an asterisk in your finder to let you know you've locked exposure. Hitting it again won't unlock the exposure; it simply relocks it again to a new value. There's no easy way to unlock this other than by taking the picture, changing the exposure mode, or letting the camera go to sleep.

AF-Area Mode Button

The AF-Area mode button, marked as [-|-], lets us select which of the 6D's 9 AF sensors are used, or set the 6D to use them all automatically.

Magnification Button

The magnification button, marked as a blue magnifying glass, lets you magnify or reduce the image(s) seen on the rear LCD screen. During playback, press the button and use the top dial to control how far you zoom in. Turned the other way, the top dial also lets you see many smaller images on the screen at once. It also works during Live View and Movie shooting. during Live View and Movie shooting, press the button a few times to cycle among the various magnifications.

Play Button

You know what the play button does. It also brings an image back to full-screen if it's been zoomed-in.

The Quick Control [Q] Button

The Quick Control [Q] button is one of the most useful buttons on the 6D, besides the shutter button. Press the [Q] and a screen loaded with settings appears. To change these settings once you get this screen, use the Master Controls to drive around, and the dial to change the setting. If you need more details about what you're setting, press the SET button again. There's no need to press OK or DONE or EXIT. The instant you've changed something, it's done. You can read and set apertures and shutter speeds on this screen, but in manual exposure mode, there is no indication for the correct exposure. For manual exposure, look at the bar graph in the finder or on the old top LCD. If you tap the INFO button, you'll call up the very similar INFO screen, which does drive the bar graph to let you set read manual exposure, but you'll have to set the shutter and aperture with the dials, not from the screen.

Master Controls

The master controls are what we use to juggle all the other settings. These include: the set button, the multi-controller, and quick control dial. The SET button can be programmed in the menus, and makes the 6D do whatever you just set it to do. It also selects the center or all AF points when you're setting the AF-area modes. Around the SET button is a directional control ring, called the multi-controller. It works in four directions when playing in the menus, and during zoomed playback, lets you scroll around in eight directions. Around the directional controller is the big quick control dial. It can be used to control many things. During shooting, the big rear dial is very important as it changes exposure compensation. During menus and playback the big rear dial also does a lot; try it and see. During manual exposure, it also sets the aperture. The LOCK switch only prevents the rear dial from changing the exposure compensation (or aperture in manual exposure). It doesn't lock anything else, or any other functions (like menu or playback control) of the rear dial. We can change what the LOCK switch does in the C.Fn. menu.

Delete Button

This is for deleting pictures. Press it, and use the master controls above to select ERASE and then press SET to delete the picture you're playing.

MENU SETTINGS

Access the MENU to change various camera system settings, such as video/photo resolution and formats. The MENU is organized into various tabs. You can access the video settings in the MENU when the camera is set to video mode, and the photography settings when the camera is set to photo mode.

Notes on settings:

Movie Rec. Size

IPB Choose IPB for normal use. The video looks the same as ALL-I below, and take up much less space.

ALL-I Choose ALL-I only when you have huge data storage resources and need excruciating precision in frame-by frame editing for theatrical release. ALL-I is intended for the editing needs of professional tele-production and motion picture production, not for consumer use.

Format card

Format the memory card before returning your camera to Media Loan. This not only clears it for the next user, but it also ensures protection of your work. Make sure to transfer the files off of the card before you format. Select “low level format” to completely clear the information (without low level format, your data will be retrievable by certain computer programs).

Video system

This sets the analog video output to NTSC (Never The Same Color) or PAL (Problems Are Lurking). It should be set according to your country and not need adjustment. Use NTSC in the USA and Japan, and PAL in Europe.

Custom White Balance

Custom white balance enables you to manually set the white balance for a specific light source for better accuracy. Perform this procedure under the actual light source to be used.

Photograph a white object.

  • The plain, white object should fill the spot metering circle.
  • Focus manually and set the standard exposure for the white object.
  • You can have have any white balance set for initial photograph--AWB, daylight, etc.


Select Custom White Balance in the menus.

  • Under the second camera sub menu, select Custom White Balance, then press set.
  • The photo you took should appear and then select OK and this white balance data will be imported.
  • When the menu reappears, press the MENU button to exit the menu.


Make sure you are on the custom white balance setting.

  • Press the WB button or the Quick Menu and select custom white balance and press set.


Media Loan Custom White Balance.png

REMOTE

The General Access kit comes with a remote, and there is multiple ways to use it. With this remote, 6D does not need to be in "remote" drive mode.

Steps for usage:

  1. Set the remote and receiver to the same channel. On each, remove the battery cover and flip the switch up to a matching channel (typically ch. 1). These must match.
  2. Plug the receiver into the corresponding input on the left side of the camera body.
  3. Power on the receiver and the camera.
  4. The shooting mode can be selected with the remote as well as the camera. The most direct way to use the remote is to set the camera to single shooting drive mode, and then use the remote to select your actual desired mode (single, continuous, BULB, and timer). The BULB function can be used two ways: two take quick, continuous shots (set the remote to bulb and the drive mode on the camera to continuous) and to take long exposures (set the remote to bulb and the exposure mode on the camera to BULB). In both uses, press the remote button one to start shooting and again to stop.
  5. If set to AF, hold the main button on the remote down halfway to focus. Press down all the way to take a picture in single shooting and timer modes. In burst mode, keep the button pressed to take multiple shots. In BULB, press the button once to open the shutter and a second time to close it.
  6. After a picture is take, you can hold the remote button halfway down again for a quick preview.

Troubleshooting

See Troubleshooting Media Equipment Guide for general information.


Media Loan Gear it Connects With Well

Collapse-small-silver.png
show less
Expand-small-silver.png
show more


See the Media Loan Catalog for more info about the below items.

  • EF Lenses
  • Tripods and other stabilizers
  • Flashes


Similar Gear at Media Loan

If you have access to APS gear, we have 6d kits for video production specifically with 3 cine lenses included

APS Policy Sidebar

Access

  • How do I get this Gear?
    • Be an Evergreen student in an APS class. Only a couple of advanced media classes are considered APS and given access.
    • Learn Media Loan Policies
    • Become proficient
    • Request the gear
    • Come pick it up
  • What is a Proficiency?
    • A test you must pass in order to use some Media Loan Gear.
    • Schedule a proficiency at the front desk of Media Loan or by calling 360-867-6253.
    • Read this gear guide and complete the written portion of the GA Canon 6D proficiency test prior to your scheduled proficiency.
    • Bring your answer sheet with you to the test, which should take approximately 30 - 45 minutes.

Precautions

  • For All Media Loan Gear
    • You are 100% financially responsible for gear you check out.
    • Don't...
      • get it wet or have in humid conditions.
      • drop it or have in insecure locations where is could fall.
      • use too much force.
      • Be in extreme temperatures, or dusty environments
      • Attempt to open or repair any gear.
  • For This Gear Specifically
    • Don't mount an EF-S Lens onto the body, use EF instead
    • Don't Point camera toward Sun
    • Don't leave this camera near a strong magnetic field
    • Don't use a blow dryer to blow dust from the camera
    • Keep the Camera with the case, we have a limited amount of 6D and although it looks hardy, it is delicate.

Media Loan Help

Media Loan Wikis

Media Loan
Media Loan Catalogs
Media Loan Gear Guides
Media Loan Topics



Retrieved from "http://helpwiki.evergreen.edu/wiki/index.php?title=Canon_6D_Gear_Guide&oldid=44714"

The Evergreen State College