Difference between revisions of "3D Lab Checklist"

From Help Wiki
(Created page with "===Checklist=== Follow this checklist every time you use the lab. Look at the  3D Lab Manual article for det...")
 
(→‎Checklist)
 
(12 intermediate revisions by 2 users not shown)
Line 1: Line 1:
 
===Checklist===
 
===Checklist===
 
Follow this checklist every time you use the lab.
 
Follow this checklist every time you use the lab.
−
Look at the [[http://wikis.evergreen.edu/computing/index.php/3D_Lab_Manual| 3D Lab Manual]]  article for details on the steps below
+
 
−
1. Sign the log book
+
Look at the [http://wikis.evergreen.edu/computing/index.php/3D_Lab_Manual 3D Lab Manual]  article for details on the steps below
−
2. Get materials ready
+
 
−
3. Power on camera and lights. Make sure that the camera is set to Manual (M).
+
# Sign the log book.
−
4. Power on the computer
+
# Get the materials ready.
−
5. Open Dragonframe. Make a new project or open an existing one.
+
# Power on camera and lights. Make sure that the camera is set to '''Manual''' (M).
−
6. Set Aspect Ratio masks
+
# Power on the computer.
−
7. Set camera settings with Dragonframe
+
# Open '''Dragonframe'''. Make a '''new project''' or open an existing one.  
−
o Focus the lens
+
# Set '''Aspect Ratio''' masks.
−
o Set exposure
+
# In the DMX window set up bash light and the DMX lights.
−
8. Turn off overhead lights and check for reflections.
+
# Turn off overhead lights and check for reflections.
−
9. Animate
+
# Set camera settings with '''Dragonframe'''
−
10. [[Exporting - Dragonframe|Export]]
+
#* Focus the lens.
 +
#* Set exposure.
 +
# Animate your sequence.
 +
# [[Exporting - Dragonframe|Export]]
 +
# Back up your files
 +
# Record your exit time in the log book as you leave.
  
 
[[Category:Animation Labs]]
 
[[Category:Animation Labs]]

Latest revision as of 12:14, 2 October 2024

Checklist

Follow this checklist every time you use the lab.

Look at the 3D Lab Manual article for details on the steps below

  1. Sign the log book.
  2. Get the materials ready.
  3. Power on camera and lights. Make sure that the camera is set to Manual (M).
  4. Power on the computer.
  5. Open Dragonframe. Make a new project or open an existing one.
  6. Set Aspect Ratio masks.
  7. In the DMX window set up bash light and the DMX lights.
  8. Turn off overhead lights and check for reflections.
  9. Set camera settings with Dragonframe
    • Focus the lens.
    • Set exposure.
  10. Animate your sequence.
  11. Export
  12. Back up your files
  13. Record your exit time in the log book as you leave.
Retrieved from "http://helpwiki.evergreen.edu/wiki/index.php?title=3D_Lab_Checklist&oldid=45855"

The Evergreen State College