Difference between revisions of "3D Lab Checklist"

Latest revision as of 12:14, 2 October 2024

Follow this checklist every time you use the lab.

Look at the 3D Lab Manual article for details on the steps below

@@ Line 1: / Line 1: @@
 ===Checklist===
 Follow this checklist every time you use the lab.
-Look at the [[http://wikis.evergreen.edu/computing/index.php/3D_Lab_Manual 3D Lab Manual]  article for details on the steps below
-.	Sign the log book
+Look at the [http://wikis.evergreen.edu/computing/index.php/3D_Lab_Manual 3D Lab Manual]  article for details on the steps below
-.	Get materials ready
-.	Power on camera and lights. Make sure that the camera is set to Manual (M).
+# Sign the log book.
-.	Power on the computer
+# Get the materials ready.
-.	Open Dragonframe. Make a new project or open an existing one.
+# Power on camera and lights. Make sure that the camera is set to '''Manual''' (M).
-.	Set Aspect Ratio masks
+# Power on the computer.
-.	Set camera settings with Dragonframe
+# Open '''Dragonframe'''.  Make a '''new project''' or open an existing one.
-o	Focus the lens
+# Set '''Aspect Ratio''' masks.
-o	Set exposure
+# In the DMX window set up bash light and the DMX lights.
-.	Turn off overhead lights and check for reflections.
+# Turn off overhead lights and check for reflections.
-.	Animate
+# Set camera settings with '''Dragonframe'''
-.	[[Exporting - Dragonframe|Export]]
+#* Focus the lens.
+#* Set exposure.
+# Animate your sequence.
+# [[Exporting - Dragonframe|Export]]
+# Back up your files
+# Record your exit time in the log book as you leave.
 [[Category:Animation Labs]]