Difference between revisions of "3D Lab Checklist"

From Help Wiki
(→‎Checklist)
 
(10 intermediate revisions by 2 users not shown)
Line 1: Line 1:
 
===Checklist===
 
===Checklist===
 
Follow this checklist every time you use the lab.
 
Follow this checklist every time you use the lab.
 +
 
Look at the [http://wikis.evergreen.edu/computing/index.php/3D_Lab_Manual 3D Lab Manual]  article for details on the steps below
 
Look at the [http://wikis.evergreen.edu/computing/index.php/3D_Lab_Manual 3D Lab Manual]  article for details on the steps below
−
1. Sign the log book
+
 
−
2. Get materials ready
+
# Sign the log book.
−
3. Power on camera and lights. Make sure that the camera is set to Manual (M).
+
# Get the materials ready.
−
4. Power on the computer
+
# Power on camera and lights. Make sure that the camera is set to '''Manual''' (M).
−
5. Open Dragonframe. Make a new project or open an existing one.
+
# Power on the computer.
−
6. Set Aspect Ratio masks
+
# Open '''Dragonframe'''. Make a '''new project''' or open an existing one.  
−
7. Set camera settings with Dragonframe
+
# Set '''Aspect Ratio''' masks.
−
o Focus the lens
+
# In the DMX window set up bash light and the DMX lights.
−
o Set exposure
+
# Turn off overhead lights and check for reflections.
−
8. Turn off overhead lights and check for reflections.
+
# Set camera settings with '''Dragonframe'''
−
9. Animate
+
#* Focus the lens.
−
10. [[Exporting - Dragonframe|Export]]
+
#* Set exposure.
 +
# Animate your sequence.
 +
# [[Exporting - Dragonframe|Export]]
 +
# Back up your files
 +
# Record your exit time in the log book as you leave.
  
 
[[Category:Animation Labs]]
 
[[Category:Animation Labs]]

Latest revision as of 12:14, 2 October 2024

Checklist

Follow this checklist every time you use the lab.

Look at the 3D Lab Manual article for details on the steps below

  1. Sign the log book.
  2. Get the materials ready.
  3. Power on camera and lights. Make sure that the camera is set to Manual (M).
  4. Power on the computer.
  5. Open Dragonframe. Make a new project or open an existing one.
  6. Set Aspect Ratio masks.
  7. In the DMX window set up bash light and the DMX lights.
  8. Turn off overhead lights and check for reflections.
  9. Set camera settings with Dragonframe
    • Focus the lens.
    • Set exposure.
  10. Animate your sequence.
  11. Export
  12. Back up your files
  13. Record your exit time in the log book as you leave.
Retrieved from "http://helpwiki.evergreen.edu/wiki/index.php?title=3D_Lab_Checklist&oldid=45855"

The Evergreen State College