Difference between revisions of "Imaging A SD Card For Your Pi"
From Help Wiki
(Created page with " Category:Raspberry Pi") |
|||
| (3 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
| + | ===How to image your SD=== | ||
| + | #Download [https://www.raspberrypi.org/downloads/raspbian/ Rasbian With Desktop] as a zip (recommended) or whatever your preferred OS to image is. | ||
| + | #Connect the SD card you wish to image. ''Please note this will erase all data on the SD card'' | ||
| + | #Open "Etcher" from the applications folder. | ||
| + | #In Etcher, select either the zip or img file you downloaded, as well as the SD card you wish to flash. | ||
| + | #Press the "Flash" button to begin the process, and do not interrupt it until finished. | ||
| + | |||
| + | |||
| + | |||
| + | For more detailed instructions, please refer to the [https://www.raspberrypi.org/documentation/installation/installing-images/README.md Raspberry Pi Documentation] | ||
[[Category:Raspberry Pi]] | [[Category:Raspberry Pi]] | ||
Latest revision as of 14:36, 10 July 2018
How to image your SD
- Download Rasbian With Desktop as a zip (recommended) or whatever your preferred OS to image is.
- Connect the SD card you wish to image. Please note this will erase all data on the SD card
- Open "Etcher" from the applications folder.
- In Etcher, select either the zip or img file you downloaded, as well as the SD card you wish to flash.
- Press the "Flash" button to begin the process, and do not interrupt it until finished.
For more detailed instructions, please refer to the Raspberry Pi Documentation
