Difference between revisions of "Audio Interface - Mixing Bench"

From Help Wiki
(→‎Outputs)
(→‎Outputs)
 
(10 intermediate revisions by the same user not shown)
Line 1: Line 1:
  
−
This lab has a MOTU 828mk3 audio Interface.  It has multiple inputs and outputs.  Unfortunately the order and labeling of the inputs and outputs in the audio applications can be confusing.
+
This lab has a '''Apollo x8''' audio Interface which has multiple inputs and outputs.   
  
 
== Inputs ==
 
== Inputs ==
−
* There are two XLR/1/4" mic/instrument inputs on the front.
+
* On the front there are two HI-Z inputs inputs (labelled '''HI-Z 1''' and '''HI-Z 2''')
−
** Microphones can be connected to theses inputs with XLR cables.
+
** Theses are for low level signal like electric guitars.  Only use mono 1/4 cables.
−
** Guitars can be connected with 1/4" cables.
+
* There are 4 XLR mic inputs on the back of the interface.
 +
** There is a panel with 4 XLR jacks below the interface.
 +
** These are connected to the 4 mic inputs.
 +
** Microphones can be connected to these inputs using XLR cables (not included in the room).
 
** Each input has:
 
** Each input has:
−
*** Trim control knob for setting levels
+
*** Trim control knob for setting input levels
−
*** Pad for reducing inout levels
+
*** Pad for reducing input levels
−
* There are eight 1/4" line level inputs on the back.  
+
*** 48V Phantom Power for powering condenser microphones
−
** Inputs 1 and 2 are connected to the patchbay.
+
*** Low cut filter.
−
** The main outputs of the mixer are connected directly to inputs 3 and 4.  
+
* There are eight 1/4" line level inputs on the back.
−
** The other inputs are not being used.
+
** Theses are not connected to anything  
−
** Do not connect or disconnect cables on the back.
+
  
 
== Outputs ==
 
== Outputs ==
−
* There are two XLR Main outputs on the back.
+
* Outputs 1 and 2 are connected to the '''Mackie Big Knob''' monitor controller.
−
** Theses are connected directly to the Volume Control Box.
+
* The other outputs are not being used.
−
* There are eight 1/4" line level outputs on the back.
+
−
** Outputs 1 and 2 are connected to the patchbay.  
+
−
** The other outputs are not being used.
+
−
** Do not connect or disconnect cables on the back.
+
  
 
== Labeling ==
 
== Labeling ==
 
* The various audio applications may refer to the inputs and outputs with slightly different names.
 
* The various audio applications may refer to the inputs and outputs with slightly different names.
 
* We have tried to set the preferences to meaningful names but sometimes they may revert back to the default names.  
 
* We have tried to set the preferences to meaningful names but sometimes they may revert back to the default names.  
 +
* Read the [[Apollo x8 Interface]] article for additional information  
  
−
=== Inputs ===
 
−
* Mic/Instrument inputs come before the line inputs.
 
−
* This makes the numbering of the analog inputs confusing.
 
−
*** For example analog input 1 is input 3.
 
−
{|
 
−
|MOTU Inputs
 
−
|Software Label
 
−
|-
 
−
|Mic/Instrument 1
 
−
|Input 1
 
−
|-
 
−
|Mic/Instrument 2
 
−
|Input 2
 
−
|-
 
−
|Line 1
 
−
|Input 3
 
−
|-
 
−
|Line 2
 
−
|Input 4
 
−
|-
 
−
|Line 3
 
−
|Input 5
 
−
|-
 
−
|Line 4
 
−
|Input 6
 
−
|}
 
−
 
−
=== Outputs ===
 
−
* The Main outputs inputs come before the line outputs.
 
−
* This makes the numbering of the analog outputs confusing. 
 
−
*** For example analog output 1 is output 3.
 
−
{|
 
−
|MOTU Outputs
 
−
|Software Label
 
−
|-
 
−
|Main Out 1
 
−
|Output 1
 
−
|-
 
−
|Main Out 2
 
−
|Output 2
 
−
|-
 
−
|Line 1
 
−
|Output 3
 
−
|-
 
−
|Line 2
 
−
|Output 4
 
−
|}
 
−
 
−
{| class="wikitable"
 
−
!test
 
−
!
 
−
!
 
−
!
 
−
|-
 
−
|
 
−
|
 
−
|
 
−
|
 
−
|-
 
−
|
 
−
|
 
−
|
 
−
|
 
−
|-
 
−
|
 
−
|
 
−
|
 
−
|
 
−
|}
 
 
[[Category:Audio Mixing Benches]]
 
[[Category:Audio Mixing Benches]]

Latest revision as of 09:16, 19 September 2023

This lab has a Apollo x8 audio Interface which has multiple inputs and outputs. 

Inputs

  • On the front there are two HI-Z inputs inputs (labelled HI-Z 1 and HI-Z 2)
    • Theses are for low level signal like electric guitars.  Only use mono 1/4 cables.
  • There are 4 XLR mic inputs on the back of the interface.
    • There is a panel with 4 XLR jacks below the interface.
    • These are connected to the 4 mic inputs.
    • Microphones can be connected to these inputs using XLR cables (not included in the room).
    • Each input has:
      • Trim control knob for setting input levels
      • Pad for reducing input levels
      • 48V Phantom Power for powering condenser microphones
      • Low cut filter.
  • There are eight 1/4" line level inputs on the back.
    • Theses are not connected to anything  

Outputs

  • Outputs 1 and 2 are connected to the Mackie Big Knob monitor controller.
  • The other outputs are not being used.

Labeling

  • The various audio applications may refer to the inputs and outputs with slightly different names.
  • We have tried to set the preferences to meaningful names but sometimes they may revert back to the default names.  
  • Read the Apollo x8 Interface article for additional information  
Retrieved from "http://helpwiki.evergreen.edu/wiki/index.php?title=Audio_Interface_-_Mixing_Bench&oldid=44782"

The Evergreen State College