Difference between revisions of "Audio Lab Surround Sound Settings"

Revision as of 09:22, 25 October 2013

Load the O2R surround sound scene

1. Power on O2R mixing console
2. Scene Memory > Select "03 surround mix > Recall
3. this assigns the inputs 25 - 30 to bus 1 - 6 (omni outputs to surround sound)
4. pan is disabled in the routing page

Setting surround sound bundles in Digital Performer

1. Open up your DP project
2. DP Menu > Studio > Bundles (shift - U)
3. Select the Outputs tab
4. Select the list of outputs under NAME and DELETE them.
5. Select the ADD option at the right bottom of the window
6. Under MODEL, change it to 5.1
7. Close bundles window

Assign the outputs of your DP tracks

1. Highlight all your tracks that you want mixed to 5.1
2. Menu > Studios > Audio Assignments > Assign all selected tracks to this output > choose "analog 1 - 6"

SPL surround controller

1. Select A surround
2. Press the 6 X 5.1 surround monitor push buttons
3. Turn on Adam speakers
4. Turn up volume