Difference between revisions of "Shure Wireless Microphone Quick Guide"
From Help Wiki
(→Start Up) |
|||
| Line 2: | Line 2: | ||
===Start Up=== | ===Start Up=== | ||
<gallery> | <gallery> | ||
| − | File: | + | File:shureStep1.jpg|Step 1 |
| − | File: | + | File:shureStep2.jpg|Step 2 |
| + | File:shureStep3.jpg|Step 3 | ||
| + | File:shureStep4.jpg|Step 4 | ||
| + | File:shureStep5.jpg|Step 5 | ||
| + | File:shureStep6.jpg|Step 6a | ||
| + | File:shureStep6part2.jpg|Step 6b | ||
| + | File:shureStep7.jpg|Step 7 | ||
</gallery> | </gallery> | ||
# Turn '''OFF''' the microphone or body-pack. If left on, it will create a false busy indicator. | # Turn '''OFF''' the microphone or body-pack. If left on, it will create a false busy indicator. | ||
| Line 13: | Line 19: | ||
# Check to see that the transmitter and the receiver display the came channel. The ready '''LED''' on the receiver should be illuminated. | # Check to see that the transmitter and the receiver display the came channel. The ready '''LED''' on the receiver should be illuminated. | ||
# Replace battery cover. | # Replace battery cover. | ||
| + | ====Busy Indicator==== | ||
| + | <gallery> | ||
| + | File:busy_indicator.jpg|Busy Indicator | ||
| + | </gallery> | ||
| + | When selecting channels, a flashing dash indicates interference from the television broadcasts, electronic devices, or other wireless systems. if this occurs, change the channel. | ||
[[category:Media Loan]] | [[category:Media Loan]] | ||
Revision as of 10:11, 26 July 2013
The Shure Wireless Microphones are restricted to Staff and Faculty
Start Up
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6a
Step 6b
Step 7
- Turn OFF the microphone or body-pack. If left on, it will create a false busy indicator.
- Plug in the power supply. The channel display should illuminate. There is no power switch.
- Press and hold the channel button until the display begins flashing. If you see the Busy Indicator (A flashing dash) change the channel.
- Wait for the channel display to stop flashing.
- If you haven't installed the battery, do it now and leave the cover off.
- Turn ON the handheld or body-pack transmitter by pressing the power button. Then channel display should illuminate. It turns off after ten seconds to conserve battery.
- Check to see that the transmitter and the receiver display the came channel. The ready LED on the receiver should be illuminated.
- Replace battery cover.
Busy Indicator
- Busy indicator.jpg
Busy Indicator
When selecting channels, a flashing dash indicates interference from the television broadcasts, electronic devices, or other wireless systems. if this occurs, change the channel.
