Difference between revisions of "COM 110"

Revision as of 11:17, 27 January 2014

Turn on the Main Power in the rack located at the front of the room
Turn on the projector power with projector remote - orange bar on front of projector should turn green.

Connect the VGA cable (taped to desk) to your computer.
Plug in the stereo mini cable for computer sound.
On the projector remote - select Computer
On the audio mixer in the rack - select Aux 5 - bring up both the stereo and main faders.

Turn on the projector with the projector remote.
Use the projector remote to switch the projector input to VIDEO
In AV rack, select DVD or VHS on video switcher
In AV rack, on the audio mixer - move selector knob to AUX 1 = DVD or AUX 2 = VHS.

@@ Line 1: / Line 1: @@
 [[File:COM-110-AV-rack.png|thumbnail]]
 __NOTOC__
-The AV in this classroom is currently under remodel. The projector cart must be retrieved from the closet by the COM information office staff. The projector must be plugged into the back wall with power, 5 BNC cables, single RCA cable. The projector remote located on the cart must be used.
 ===Power===
@@ Line 15: / Line 14: @@
 ===Video (VHS, DVD)===
 # Turn on the projector with the projector remote.
-# Use the projector remote to switch the projector input to ?
+# Use the projector remote to switch the projector input to '''VIDEO'''
 # In AV rack, select '''DVD''' or '''VHS''' on video switcher
 # In AV rack, on the audio mixer - move selector knob to '''AUX 1 = DVD''' or '''AUX 2 = VHS'''.