Difference between revisions of "Sem II 4107 Class Lab"

From Help Wiki
Line 1: Line 1:
−
[[Category:Media Classrooms]]
+
LIB 4300/SEM II 4107
−
===Powering The System===
+
 
 +
Computer
 +
 
 +
# Press the ‘Computer’ button on the console attached to the podium.
 +
# Select any of the three options from the touch screen console ‘Mac Mini,’ ‘VGA,’ or ‘HDMI’.
 +
# Attach the VGA or HDMI cables to your laptop, be sure to include the audio cable for VGA.
 
   
 
   
 +
Document Camera
  
−
# Press '''Display Power''' button on the '''Media Control Panel''' to turn on the television.  
+
# Press the ‘Document Camera’ button on the console attached to the podium.
−
#* A green light will appear in the bottom right corner of the monitor to indicate that it is on. (This may take a few seconds)
+
# Turn on the Document Camera. Be patient, this can take up to a minute to warm up.
−
# Press the input button on the '''Media Control Panel'''. This will allow you to select a source.
+
−
# An '''Input Source''' menu will appear on the top right corner of the screen. Use the '''Input''' button to scroll through the menu to select your source.
+
−
# For '''VHS/DVD''' select '''2AV'''.
+
−
# For '''Laptops''' select '''3RGB'''.
+
  
−
If you are unable to get the TV to power on check the bottom side of the television. The is a large red button, press it and try powering on again.
+
Bluray
  
−
===VHS/DVD===
+
# Press the ‘Bluray’ button on the console attached to the podium.
 +
# Select the ‘Open’ button on the Bluray player.
 +
# Insert your Bluray disc into the tray and close the receptacle.
  
−
# Turn on the '''VHS/DVD''' deck.
+
VCR/DVD
−
# Use the '''Remote''' or the buttons on the '''VHS/DVD''' deck to control viewing functions, or access menus.
+
  
−
===Laptop===
+
# Press the ‘VCR/DVD’ button on the console attached to the podium.
−
No permanent VGA cable in this room. You can checkout a VGA cable from Media Loan X 6253.
+
# Select either VCR or DVD from the touch screen console.
−
# Connect the '''VGA''' cable to your '''Laptop'''
+
# Insert VHS or DVD into their receptacles
−
#* If you have a Mac you will need a mac adapter to connect to VGA cable. Adapter available from Media Loan X 6253.
+
 
−
# If you need audio connect the '''Stereo Mini''' cable to the headphone jack on your laptop.
+
Music
−
# Turn on the laptop.  
+
 
−
# The laptop should now be projecting on the television monitor.
+
# Press the ‘Music’ button on the console attached to the podium.
 +
# Attach the VGA audio cable to your audio source.
 +
 
 +
Mic Only
 +
 
 +
# Press the ‘Mic Only’ button on the console attached to the podium.
 +
# Use either the wired or wireless microphones.
 +
# Adjust the volume on the mics through the touch screen panel.  
 +
 
 +
Mute All
 +
 
 +
# Press the ‘Mute All’ button on the console attached to the podium.
 +
# The image should turn black until you press the button again.
 +
 
 +
System Off
 +
 
 +
# Press the ‘System Off’ button on the console attached to the podium.
 +
# Press ‘Power Down’ to turn the system all the way off.
 +
 
 +
 
 +
[[Category:Media Classrooms]]

Revision as of 10:21, 8 December 2015

LIB 4300/SEM II 4107

Computer

  1. Press the ‘Computer’ button on the console attached to the podium.
  2. Select any of the three options from the touch screen console ‘Mac Mini,’ ‘VGA,’ or ‘HDMI’.
  3. Attach the VGA or HDMI cables to your laptop, be sure to include the audio cable for VGA.

Document Camera

  1. Press the ‘Document Camera’ button on the console attached to the podium.
  2. Turn on the Document Camera. Be patient, this can take up to a minute to warm up.

Bluray

  1. Press the ‘Bluray’ button on the console attached to the podium.
  2. Select the ‘Open’ button on the Bluray player.
  3. Insert your Bluray disc into the tray and close the receptacle.

VCR/DVD

  1. Press the ‘VCR/DVD’ button on the console attached to the podium.
  2. Select either VCR or DVD from the touch screen console.
  3. Insert VHS or DVD into their receptacles

Music

  1. Press the ‘Music’ button on the console attached to the podium.
  2. Attach the VGA audio cable to your audio source.

Mic Only

  1. Press the ‘Mic Only’ button on the console attached to the podium.
  2. Use either the wired or wireless microphones.
  3. Adjust the volume on the mics through the touch screen panel.

Mute All

  1. Press the ‘Mute All’ button on the console attached to the podium.
  2. The image should turn black until you press the button again.

System Off

  1. Press the ‘System Off’ button on the console attached to the podium.
  2. Press ‘Power Down’ to turn the system all the way off.
Retrieved from "http://helpwiki.evergreen.edu/wiki/index.php?title=Sem_II_4107_Class_Lab&oldid=27324"

The Evergreen State College