Difference between revisions of "COM 110"

From Help Wiki
Line 1: Line 1:
−
[[File:COM-110-AV-rack.png|thumbnail]]
+
<pdf width="800" height="500">File:COM308-AV-Rack9-24-14.pdf</pdf>
 
__NOTOC__
 
__NOTOC__
 +
Need help? Call Media Services X 6270 for media assistance.
  
−
Need help? Call Media Services X 6270 for media help.
+
===Exterior Wall Panel===
 +
# '''DISPLAY''' button turns on Projector
 +
# Select your video source, '''HDMI''' or '''VGA'''
 +
# Plug in your computer using either an HDMI or VGA cable
 +
# Use the '''VOLUME''' control knob to adjust volume.
 +
# DO NOT PLUG IN BOTH A VGA AND HDMI CABLE AT THE SAME TIME, the system will not work
 +
# Note: there is a short delay in video switching (5-10 sec)
  
−
===Power===
+
===Exterior Wall Panel - Microphone Use===
−
# Turn on the '''Main Power''' in the rack located at the front of the room
+
# Connect XLR cable from the microphone to the '''MIC''' input on the panel
−
# Turn on the projector power with projector remote - orange bar on front of projector should turn green.
+
# '''MIC UP''' & '''MIC DOWN''' buttons control the microphone volume
 +
# Mic volume is independent of the Wall Panel '''Volume'''
  
−
===Computer===
+
===AV Rack===
−
# Connect the VGA cable (taped to desk) to your computer.
+
# Press '''RACK''' button on external AV PANEL
−
# Plug in the stereo mini cable for computer sound.
+
# Press '''DISPLAY''' button on external AV PANEL to turn on projector
−
# On the projector remote - select '''Computer'''  
+
# Select your video source: '''VGA''' (Laptop), '''HDMI''', '''BLU RAY''', '''DVD/VCR''' or '''CASSETTE'''
−
# On the audio mixer in the rack - select '''Aux 5''' - bring up both the stereo and main faders.
+
# Insert or plug in your media
 +
# On the '''RANE''' audio mixer use the individual source knobs to control the volume.  =====MAKE SURE '''OUTPUT''' VOLUME IS TURNED UP (Around 9:00)=====
 +
# Turn down all unused volume knobs that are not in use.
 +
# Return the individual source volume on RANE mixer to zero when finished.
  
−
===Video (VHS, DVD)===
 
−
# Turn on the projector with the projector remote.
 
−
# Use the projector remote to switch the projector input to '''VIDEO'''
 
−
# In AV rack, select '''DVD''' or '''VHS''' on video switcher
 
−
# In AV rack, on the audio mixer - move selector knob to '''AUX 1 = DVD''' or '''AUX 2 = VHS'''.
 
  
−
===Cassette===
+
====Please power everything off when done & lock the AV Cabinet====
−
#On the audio mixer select '''AUX 3'''.
+
−
#Bring up the stereo and main fader.
+
−
 
+
−
===Plug In Stereo Source===
+
−
#Use jack on front panel
+
−
#Select '''AUX 4'''
+
−
#Bring up the stereo and main faders
+
−
 
+
−
===External Microphone===
+
−
# Plug in microphone on front panel
+
−
# Slowly bring up MIC fader 1!
+
−
# Slowly bring up stereo fader!
+
−
 
+
−
===Shutting Down===
+
−
# Power down the rack.
+
−
# Turn off the projector and leave the projector remote on the table.
+
  
 
[[Category:Media Classrooms]]
 
[[Category:Media Classrooms]]

Revision as of 10:23, 24 September 2014

<pdf width="800" height="500">File:COM308-AV-Rack9-24-14.pdf</pdf>

Need help? Call Media Services X 6270 for media assistance.

Exterior Wall Panel

  1. DISPLAY button turns on Projector
  2. Select your video source, HDMI or VGA
  3. Plug in your computer using either an HDMI or VGA cable
  4. Use the VOLUME control knob to adjust volume.
  5. DO NOT PLUG IN BOTH A VGA AND HDMI CABLE AT THE SAME TIME, the system will not work
  6. Note: there is a short delay in video switching (5-10 sec)

Exterior Wall Panel - Microphone Use

  1. Connect XLR cable from the microphone to the MIC input on the panel
  2. MIC UP & MIC DOWN buttons control the microphone volume
  3. Mic volume is independent of the Wall Panel Volume

AV Rack

  1. Press RACK button on external AV PANEL
  2. Press DISPLAY button on external AV PANEL to turn on projector
  3. Select your video source: VGA (Laptop), HDMI, BLU RAY, DVD/VCR or CASSETTE
  4. Insert or plug in your media
  5. On the RANE audio mixer use the individual source knobs to control the volume. =====MAKE SURE OUTPUT VOLUME IS TURNED UP (Around 9:00)=====
  6. Turn down all unused volume knobs that are not in use.
  7. Return the individual source volume on RANE mixer to zero when finished.


Please power everything off when done & lock the AV Cabinet

Retrieved from "http://helpwiki.evergreen.edu/wiki/index.php?title=COM_110&oldid=24452"

The Evergreen State College