Difference between revisions of "Audio Lab Surround Sound Settings"

Revision as of 11:38, 12 February 2015

Load the O2R surround sound scene

1. Power on O2R mixing console (Tripp Lite main power bar located on the right side of desk)
2. On the O2R find Scene Memory > Use the up or down arrow buttons to find "03 surround mix" > Press Recall
3. this assigns the inputs 25 - 30 to bus 1 - 6 (omni outputs to surround sound)
4. In the "LAYER" section, press 25-48 button, faders 25 - 31 should be up to unity 0, this recieves audio from the MOTU sound cards via Digital Performer
5. In the "LAYER" section, press the MASTER button, ALL BUS faders should be up to unity 0, these outputs go to the Surround Monitor Controller
6. pan is disabled in the routing page

Setting surround sound bundles in Digital Performer

1. Open up your DP project
2. DP Menu > Studio > Bundles (shift - U)
3. Select the Outputs tab
4. Select the ADD button at the left bottom of the window
5. Under the MODEL row of your new output bundle, option-click the name (Main Out 1-2) and change it to 5.1, press enter
6. Click on the Stereo option of your new 5.1 output and change it to 5.1, you should see L,R,C, LFE,LS, RS appear
7. Move them under the outputs Analog 1 - Analog 7 in the same order
8. Close the Bundles window now, top left red X

Assign the outputs of your DP tracks

1. Highlight all your tracks that you want mixed to 5.1
2. Menu > Studios > Audio Assignments > Assign all selected tracks to this output > choose "analog 1 - 6"

SPL surround controller

1. Select A surround
2. Press the 6 X 5.1 surround monitor push buttons
3. Turn on Adam speakers
4. Turn up volume