Difference between revisions of "O2R-MOTU-Digital Performer Cheat Sheet"
From Help Wiki
| Line 5: | Line 5: | ||
*On the O2R console: | *On the O2R console: | ||
Locate scene memory | Locate scene memory | ||
| − | Press Display | + | Press "Display" |
Toggle to 95 Zena DP template | Toggle to 95 Zena DP template | ||
| − | Press | + | Press "Recall" |
*Studio: Patch in microphone to Panel A, Input 1 | *Studio: Patch in microphone to Panel A, Input 1 | ||
Revision as of 13:49, 10 February 2016
Directions:
- Turn ON Main Power (orange switch on desk to the right)
- On the O2R console:
Locate scene memory Press "Display" Toggle to 95 Zena DP template Press "Recall"
- Studio: Patch in microphone to Panel A, Input 1
(Mic panels in 1362 are normalized to the inputs of O2R MIC/LINE inputs)
- O2R - find 'Layer' section and select 1-24
- Trim out or choose +48V On/Off for each channel you plugged in to
- Push fader up and you should see levels on the Meters
- Push up stereo fader
- On the Control Room section select 'STEREO'
- Turn up 'Control Room Level' light grey knob to control speaker volume
- Open Digital Performer and choose 'Audio Lab Template', save to Storage drive in your folder with your name on it.
- On Layer 25-48 of the O2R, channels 25 & 26 are the MAIN L/R OUT of Digital Performer
Headphone Mixes
- Use the 'Encoder knobs on the O2R to control headphone volume
- In the 'Encoder Mode' section select 'AUX'
- Use the Encoder knob on your 'LIVE' channel to control volume to the headphones
- Use the Encoder knob on channels 25 & 26 to control volume from Digital Performer Mix L Mix R
