Difference between revisions of "O2R-MOTU-Digital Performer Cheat Sheet"
From Help Wiki
| Line 12: | Line 12: | ||
(Mic panels in 1362 are normalized to the inputs of O2R MIC/LINE inputs) | (Mic panels in 1362 are normalized to the inputs of O2R MIC/LINE inputs) | ||
| − | *O2R - find 'Layer' section and select 1-24 | + | *O2R - find '''Layer''' section and select 1-24 |
*Trim out or choose +48V On/Off for each channel you plugged in to | *Trim out or choose +48V On/Off for each channel you plugged in to | ||
*Push fader up and you should see levels on the Meters | *Push fader up and you should see levels on the Meters | ||
*Push up stereo fader | *Push up stereo fader | ||
| − | *On the Control Room section select 'STEREO' | + | *On the Control Room section select '''STEREO''' |
*Turn up 'Control Room Level' light grey knob to control speaker volume | *Turn up 'Control Room Level' light grey knob to control speaker volume | ||
| − | *Open Digital Performer and choose 'Audio Lab Template', save to Storage drive in your folder with your name on it. | + | *Open Digital Performer and choose '''Audio Lab Template''', save to Storage drive in your folder with your name on it. |
*On Layer 25-48 of the O2R, channels 25 & 26 are the MAIN L/R OUT of Digital Performer | *On Layer 25-48 of the O2R, channels 25 & 26 are the MAIN L/R OUT of Digital Performer | ||
'''Headphone Mixes''' | '''Headphone Mixes''' | ||
| − | *Use the 'Encoder knobs on the O2R to control headphone volume | + | *Use the '''Encoder''' knobs on the O2R to control headphone volume |
| − | *In the 'Encoder Mode' section select 'AUX' | + | *In the '''Encoder Mode''' section select '''AUX''' |
| − | *Use the Encoder knob on your 'LIVE' channel to control volume to the headphones | + | *Use the Encoder knob on your '''LIVE''' channel to control volume to the headphones |
*Use the Encoder knob on channels 25 & 26 to control volume from Digital Performer Mix L Mix R | *Use the Encoder knob on channels 25 & 26 to control volume from Digital Performer Mix L Mix R | ||
Revision as of 13:54, 10 February 2016
Directions:
- Turn ON Main Power (orange switch on desk to the right)
- On the O2R console:
Locate scene memory Press "Display" Toggle to "95 Zena DP template" Press "Recall"
- Studio: Patch in microphone to Panel A, Input 1
(Mic panels in 1362 are normalized to the inputs of O2R MIC/LINE inputs)
- O2R - find Layer section and select 1-24
- Trim out or choose +48V On/Off for each channel you plugged in to
- Push fader up and you should see levels on the Meters
- Push up stereo fader
- On the Control Room section select STEREO
- Turn up 'Control Room Level' light grey knob to control speaker volume
- Open Digital Performer and choose Audio Lab Template, save to Storage drive in your folder with your name on it.
- On Layer 25-48 of the O2R, channels 25 & 26 are the MAIN L/R OUT of Digital Performer
Headphone Mixes
- Use the Encoder knobs on the O2R to control headphone volume
- In the Encoder Mode section select AUX
- Use the Encoder knob on your LIVE channel to control volume to the headphones
- Use the Encoder knob on channels 25 & 26 to control volume from Digital Performer Mix L Mix R
