Difference between revisions of "3D Lab Checklist"
From Help Wiki
(→Checklist) |
(→Checklist) |
||
| Line 4: | Line 4: | ||
Look at the [http://wikis.evergreen.edu/computing/index.php/3D_Lab_Manual 3D Lab Manual] article for details on the steps below | Look at the [http://wikis.evergreen.edu/computing/index.php/3D_Lab_Manual 3D Lab Manual] article for details on the steps below | ||
| − | + | # Sign the log book. | |
| − | + | # Get materials ready | |
| − | + | # Power on both the camera and lights. Make sure that the camera is set to Manual (M). | |
| − | + | # Power on the computer. | |
| − | + | # Open Dragonframe, make a '''new project''' or open an existing one. | |
| − | + | # Set Aspect Ratio masks. | |
| − | + | # Set camera settings with Dragonframe | |
* Focus the lens | * Focus the lens | ||
* Set exposure | * Set exposure | ||
| − | + | # Turn off overhead lights and check for reflections. | |
| − | + | # Animate your sequence. | |
| − | + | # [[Exporting - Dragonframe|Export]]. | |
| − | + | # Record your exit time in the log book as you leave. | |
[[Category:Animation Labs]] | [[Category:Animation Labs]] | ||
Revision as of 09:26, 5 October 2016
Checklist
Follow this checklist every time you use the lab.
Look at the 3D Lab Manual article for details on the steps below
- Sign the log book.
- Get materials ready
- Power on both the camera and lights. Make sure that the camera is set to Manual (M).
- Power on the computer.
- Open Dragonframe, make a new project or open an existing one.
- Set Aspect Ratio masks.
- Set camera settings with Dragonframe
- Focus the lens
- Set exposure
- Turn off overhead lights and check for reflections.
- Animate your sequence.
- Record your exit time in the log book as you leave.
