Difference between revisions of "Cables and Adapters Catalog"
Medialoan10 (Talk | contribs) (Tag: VisualEditor) |
Medialoan10 (Talk | contribs) (Tag: VisualEditor) |
||
Line 406: | Line 406: | ||
changes. | changes. | ||
+ | |- | ||
+ | |X-BRIDG | ||
+ | |[[File:Cable 38a.jpg|centre|thumb|200x200px]] | ||
+ | |Bridging Transformer | ||
+ | |AUDIO | ||
+ | |Balanced low impedance to high | ||
+ | impedance matching transformer. | ||
+ | |||
+ | Use for transmitting a low impedance | ||
+ | |||
+ | source to a high impedance source. | ||
+ | |- | ||
+ | |X-LOPAS | ||
+ | |[[File:Cable 38b.jpg|centre|thumb|200x200px]] | ||
+ | |Line Pad / LoPass | ||
+ | |AUDIO | ||
+ | |Passes low frequencies and cuts | ||
+ | high frequencies. Use to balance / cut | ||
+ | |||
+ | out unwanted noise. | ||
+ | |- | ||
+ | |X-HIPAS | ||
+ | |[[File:Cable 38c.jpg|centre|thumb|200x200px]] | ||
+ | |HI-LO / HiPass | ||
+ | |AUDIO | ||
+ | |Cuts low frequencies and passes | ||
+ | high frequencies. Use to balance / | ||
+ | |||
+ | cut out unwanted noise. | ||
+ | |- | ||
+ | |X-PRESE | ||
+ | |[[File:Cable 38d.jpg|centre|thumb|200x200px]] | ||
+ | |Phase | ||
+ | |AUDIO | ||
+ | |Takes a signal and puts it 180º out | ||
+ | of phase. Use to invert an electrical | ||
+ | |||
+ | signal. | ||
+ | |- | ||
+ | |X-RESPON | ||
+ | |[[File:Cable 38e.jpg|centre|thumb|200x200px]] | ||
+ | |Response Shaper | ||
+ | |AUDIO | ||
+ | |Cuts frequencies at 5k. Use this to | ||
+ | balance / cut out unwanted noise. | ||
+ | |- | ||
+ | |XPEM-XM | ||
+ | |[[File:Cable 39.jpg|centre|thumb|200x200px]] | ||
+ | |XLR MALE - | ||
+ | 1/4" MALE | ||
+ | |AUDIO | ||
+ | |This cable is designed to connect | ||
+ | gear with balanced phone outputs | ||
+ | |||
+ | to gear with XLR inputs. It is ideal | ||
+ | |||
+ | for use in a variety of audio | ||
+ | |||
+ | applications. | ||
+ | |- | ||
+ | |XPEM-XF | ||
+ | |[[File:Cable 40.jpg|centre|thumb|200x200px]] | ||
+ | |XLR FEMALE - | ||
+ | 1/4" MALE | ||
+ | |AUDIO | ||
+ | |This cable is designed to connect | ||
+ | gear with balanced phone outputs to | ||
+ | |||
+ | gear with XLR inputs. It is ideal for | ||
+ | |||
+ | use in a variety of audio applications. | ||
+ | |- | ||
+ | |YPEM-XM | ||
+ | |[[File:Cable 41.jpg|centre|thumb|200x200px]] | ||
+ | |XLR MALE - | ||
+ | 1/4" MALE Y | ||
+ | |AUDIO | ||
+ | |This cable is perfect for connecting | ||
+ | microphones with 1/4 inch jack to | ||
+ | |||
+ | cameras, camcorders, or other | ||
+ | |||
+ | professional audio equipments with | ||
+ | |||
+ | XLR connector. Suitable for mic, mixer, | ||
+ | |||
+ | amplifier, home theater and other | ||
+ | |||
+ | environments. | ||
+ | |- | ||
+ | |YPEM-XF | ||
+ | |[[File:Cable 42.jpg|centre|thumb|200x200px]] | ||
+ | |XLR FEMALE - | ||
+ | 1/4" MALE Y | ||
+ | |AUDIO | ||
+ | |This cable is perfect for connecting | ||
+ | microphones with 1/4 inch jack to | ||
+ | |||
+ | cameras, camcorders, or other | ||
+ | |||
+ | professional audio equipments with | ||
+ | |||
+ | XLR connector. Suitable for mic, mixer, | ||
+ | |||
+ | amplifier, home theater and other | ||
+ | |||
+ | environments. | ||
+ | |- | ||
+ | |X-XM-XM | ||
+ | |[[File:Cable 43.jpg|centre|thumb|200x200px]] | ||
+ | |XLR MALE - | ||
+ | XLR MALE | ||
+ | |AUDIO | ||
+ | |Designed to change an XLR input | ||
+ | into an XLR output. | ||
+ | |- | ||
+ | |X-XF-XF | ||
+ | |[[File:Cable 44.jpg|centre|thumb|200x200px]] | ||
+ | |XLR FEMALE - | ||
+ | XLR FEMALE | ||
+ | |AUDIO | ||
+ | |Designed to change an XLR output | ||
+ | into an XLR input. | ||
+ | |- | ||
+ | |Y-XF-XM | ||
+ | |[[File:Cable 45.jpg|centre|thumb|200x200px]] | ||
+ | |XLR MALE - | ||
+ | XLR FEMALE Y | ||
+ | |AUDIO | ||
+ | |This cable is designed to connect two | ||
+ | XLR outputs to one XLR input. It may be | ||
+ | |||
+ | used to connect two microphones to one | ||
+ | |||
+ | channel on a mixing console when a second channel is unavailable. | ||
+ | |- | ||
+ | |Y-XM-XF | ||
+ | |[[File:Cable 46.jpg|centre|thumb|200x200px]] | ||
+ | |XLR FEMALE - | ||
+ | XLR MALE Y | ||
+ | |AUDIO | ||
+ | |This Y-cable is designed to connect | ||
+ | an XLR output to two XLR inputs. It is | ||
+ | |||
+ | ideal for assigning the signal from a | ||
+ | |||
+ | microphone to two channels on a | ||
+ | |||
+ | mixing console. | ||
|} | |} | ||
[[Category:Media Loan]] | [[Category:Media Loan]] |
Revision as of 13:23, 30 August 2018
TESC
SKU |
IMAGE | TYPE | AUDIO/
VIDEO |
USAGE |
---|---|---|---|---|
XMM-MF | MINI MALE -MINI FEMALE | AUDIO | Extension cable for microphones,
headphones, smartphones, tablets, or other media players. | |
XMF-MF | MINI FEMALE -
MINI FEMALE |
AUDIO | Extension cable for microphones,
headphones, smartphones, tablets, or other media players. | |
X-MM-MM | MINI MALE -
MINI MALE |
AUDIO | Extension cable for microphones,
headphones, smartphones, tablets, or other media players. | |
Y-MM-MF | MINI MALE -
MINI FEMALE Y |
AUDIO | Extension cable for microphones,
headphones, smartphones, tablets, or other media players. | |
XPOFPOM | RCA MALE -
RCA FEMALE |
AUDIO/
VIDEO |
Adaptor to extend the length of
your mono cable, subwoofer cable, digital audio cable or video cable whilst maintaining an optimized connection. | |
YPOMPOM | RCA MALE -
RCA MALE Y |
AUDIO/
VIDEO |
Ideal for home-entertainment and
high-fidelity (HiFi) systems. The split RCA on one end allows you to connect to multiple devices. | |
XMM-POM | RCA MALE -
MINI MALE |
AUDIO | Adapter cable connects a smartphone,
tablet, or MP3 player to a speaker, stereo receiver, or other RCA-enabled device. | |
XMF-POF | RCA MALE -
MINI FEMALE |
AUDIO | This cable adapter allows you to plug a
separate ⅛” cable into this adapter and then connect to RCA auxiliary inputs on your sound system or other device. | |
YPOM-MM | RCA MALE Y -
MINI MALE |
AUDIO | Adapter cable connects various audio
devices with various kinds of stereo players. | |
YPOF-MM | RCA FEMALE Y -
MINI MALE |
AUDIO | This adaptor is for converting sound from
a computer or any other source that outputs a ⅛” connector to a receiver, amp, or any device that uses a stereo RCA input. | |
YPOMPOF | RCA FEMALE -
RCA MALE Y |
AUDIO/
VIDEO |
Adaptor or extension to a split RCA cable.
Convert the signal from dual RCA jacks (stereo) to a single RCA jack (mono) | |
YPOFPOM | RCA FEMALE Y -
RCA MALE |
AUDIO/
VIDEO |
Split RCA cable to single. Use to split any
RCA jack into two jacks. | |
XPOMPOM | RCA MALE -
RCA MALE (MONO) |
AUDIO | For single channel audio to many
devices. (mono) | |
ZPOMPOM | RCA MALE -
RCA MALE (STEREO) |
AUDIO | For connecting stereo speakers or other
audio devices. (stereo) | |
VPOMPOM | RCA MALE -
RCA MALE A/V |
AUDIO/
VIDEO |
For connecting audio and video to a
TV or similar devices. | |
XPEMPOM | 1/4" MALE -
RCA MALE |
AUDIO | Connects audio devices with the ¼” Male
to RCA for amplifiers, Hi Fi stereo audio system, speakers, recording equipment, home theater system etc. | |
YPOFPEM | 1/4" MALE -
RCA FEMALE Y |
AUDIO | This cable is designed to split a stereo signal. | |
YPEFPOF | 1/4" FEMALE -
RCA FEMALE Y |
AUDIO | These cables allow you to interface between
¼” Stereo and split RCA, so you can connect between speakers and audio devices that don't both have the same connection types. | |
YPEFPOF | 1/4" FEMALE Y -
RCA FEMALE |
AUDIO | This cable adaptor is used for connecting a
1/4 “ cable to a RCA cable, used for splitting to multiple inputs. | |
XPEFPEF | 1/4" FEMALE -
1/4" FEMALE |
AUDIO | This adaptor is designed to couple cables
with phone plugs. It works with mono or stereo plugs. | |
X-MM-PEF | 1/4" FEMALE -
MINI MALE |
AUDIO | These cables convert a large stereo 1/4" to
a small stereo 1/8" mini male. | |
YMM-PEM | 1/4" MALE Y -
MINI MALE |
AUDIO | Connects your laptop, iPhone,
or iPod with a ⅛” jack output with an AV receiver, amplifier, mixer, Hi-Fi stereo audio system, recording equipment, or speakers with dual ¼” jack inputs. | |
XPOF-XF | XLR FEMALE -
RCA FEMALE |
AUDIO | Can be used to plug your mixer's XLR line
outputs into a standalone recorder's RCA inputs, as well as other dives with the same outputs/inputs. | |
XPOM-XF | XLR FEMALE -
RCA MALE |
AUDIO | This cable converts a balanced audio signal
into an unbalanced signal. This is good for sending audio signals from an XLR source to an RCA input or vice versa. | |
XPOM-XM | XLR MALE -
RCA MALE |
AUDIO | This cable converts a balanced audio signal
into an unbalanced signal. This is good for sending audio signals from an XLR source to an RCA input or vice versa. | |
XPOF-XM | XLR MALE -
RCA FEMALE |
AUDIO | This cable converts a balanced audio signal
into an unbalanced signal. This is good for sending audio signals from an XLR source to an RCA input or vice versa. | |
YPEFPEM | 1/4" MALE -
1/4" FEMALE Y |
AUDIO | For extending a ¼” male cable into a
dual ¼” female cable. | |
YPEMPOM | 1/4" MALE -
RCA MALE Y |
AUDIO | Connects audio devices with the ¼” Male
to Dual RCA for amplifiers, Hi Fi stereo audio system, speakers, recording equipment, home theater system etc. | |
XPEMPEM | 1/4" MALE -
1/4" MALE |
AUDIO | The audio cable male to male connectors
are compatible with microphones, musical instruments, guitars, amplifiers, audio consoles, mixer audio, and much more. | |
XPEFPEM | 1/4" MALE -
1/4" FEMALE |
AUDIO | This audio cable is an extension cable
for a male to male ¼” cable. | |
X-MF-XM | XLR MALE -
MINI FEMALE |
AUDIO | This ⅛” to XLR cable connects
devices with an ⅛” jack, such as Phones, iPod, MP3 player, tablet, laptop, or voice recorder, to a mixing console or speaker. | |
YPOF-MM | XLR FEMALE -
MINI MALE STEREO |
AUDIO | This cable connects a professional
mic to a camera, computer, recorder, or any compatible device. | |
X-MF-XF | XLR FEMALE -
MINI FEMALE |
AUDIO | This mini ⅛” female to XLR female
cable can be used to connect the stereo output of an audio device to a single XLR line input on a mixing console. | |
X-MM-XF | XLR FEMALE -
MINI MALE MONO |
AUDIO | This cable can be used with a
microphone cable, monitor speakers, audio interfaces, PA applications and more. | |
X-XF-XF | (BARREL)
XLR FEMALE - XLR MALE |
AUDIO | Designed to eliminate interference
associated with ground loops. | |
XPEM-XF | (BARREL)
XLR FEMALE - 1/4" MALE |
AUDIO | This adapter maintains the balanced
nature of the signal and is useful for line level signals requiring connector changes. | |
X-BRIDG | Bridging Transformer | AUDIO | Balanced low impedance to high
impedance matching transformer. Use for transmitting a low impedance source to a high impedance source. | |
X-LOPAS | Line Pad / LoPass | AUDIO | Passes low frequencies and cuts
high frequencies. Use to balance / cut out unwanted noise. | |
X-HIPAS | HI-LO / HiPass | AUDIO | Cuts low frequencies and passes
high frequencies. Use to balance / cut out unwanted noise. | |
X-PRESE | Phase | AUDIO | Takes a signal and puts it 180º out
of phase. Use to invert an electrical signal. | |
X-RESPON | Response Shaper | AUDIO | Cuts frequencies at 5k. Use this to
balance / cut out unwanted noise. | |
XPEM-XM | XLR MALE -
1/4" MALE |
AUDIO | This cable is designed to connect
gear with balanced phone outputs to gear with XLR inputs. It is ideal for use in a variety of audio applications. | |
XPEM-XF | XLR FEMALE -
1/4" MALE |
AUDIO | This cable is designed to connect
gear with balanced phone outputs to gear with XLR inputs. It is ideal for use in a variety of audio applications. | |
YPEM-XM | XLR MALE -
1/4" MALE Y |
AUDIO | This cable is perfect for connecting
microphones with 1/4 inch jack to cameras, camcorders, or other professional audio equipments with XLR connector. Suitable for mic, mixer, amplifier, home theater and other environments. | |
YPEM-XF | XLR FEMALE -
1/4" MALE Y |
AUDIO | This cable is perfect for connecting
microphones with 1/4 inch jack to cameras, camcorders, or other professional audio equipments with XLR connector. Suitable for mic, mixer, amplifier, home theater and other environments. | |
X-XM-XM | XLR MALE -
XLR MALE |
AUDIO | Designed to change an XLR input
into an XLR output. | |
X-XF-XF | XLR FEMALE -
XLR FEMALE |
AUDIO | Designed to change an XLR output
into an XLR input. | |
Y-XF-XM | XLR MALE -
XLR FEMALE Y |
AUDIO | This cable is designed to connect two
XLR outputs to one XLR input. It may be used to connect two microphones to one channel on a mixing console when a second channel is unavailable. | |
Y-XM-XF | XLR FEMALE -
XLR MALE Y |
AUDIO | This Y-cable is designed to connect
an XLR output to two XLR inputs. It is ideal for assigning the signal from a microphone to two channels on a mixing console. |