Difference between revisions of "Audio Monitoring - 5.1 Mix Room"
From Help Wiki
(→Headphone Levels) (Tag: VisualEditor) |
(→Switcher) (Tag: VisualEditor) |
||
| Line 38: | Line 38: | ||
== Switcher == | == Switcher == | ||
| + | * The video switcher selects the source for the data projector and changes the input of the Yamaha receiver. | ||
| + | ** HDMI= CBL/SAT | ||
| + | ** VGA = CBL/SAT | ||
| + | ** iMac = CBL/SAT | ||
| + | ** CCAM = CBL/SAT | ||
| + | ** VCR= CBL/SAT | ||
| + | ** Blu-Ray = DVD | ||
== Yamaha Receiver == | == Yamaha Receiver == | ||
| − | == | + | === Inputs === |
| − | + | * Selecting iMac will set the Yamaha to CBL/SAT | |
| − | + | ** This is the stereo audio directly from the iMac | |
| − | + | * Press the Multi CH input button to use the MOTU 16A via the M906 | |
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| + | === Speaker Select === | ||
| + | * Two sets of speakers are powered by the Yamaha | ||
| + | ** A = the small surround sound speakers | ||
| + | ** B = the large JBL speakers | ||
| + | * There is a very tiny A or B letter that appears in the middle left of the Yamaha display | ||
| + | * Both sets can be on simultaneously. | ||
| + | * Only select one set. | ||
[[Category:5.1 Mix Room]] | [[Category:5.1 Mix Room]] | ||
Revision as of 15:18, 15 June 2022
The iMac has built-in speakers, a built-in microphone and a MOTU16A audio interface.
Most applications are configured to use the MOTU 16A audio interface.
Contents
Grace m906 Monitor Controller
The m906 Grace monitor controller is used to select audio sources and to adjust the volume.
Main Volume Knob
- The big silver knob on the lower right is used to set the volume.
- Double click the main level knob
- This will set the volume to 65dB
- adjust as needed
- Double click the main level knob
Analog Input Buttons
- On the top left are the analog input select buttons:
- CPU = MOTU 16A audio interface
- Blu-Ray = Blu-Ray player
- Mixer =. small mixer on top of the equipment rack
Channel Solo/Mute
- The channel solo/mute buttons can be used to solo or mute specific channels.
- The solo/mute button on the right sets the mode.
- When green the buttons are in solo mode.
- When red the buttons are in mute mode.
- Press the channel buttons to solo or mute a specific channel.
Speaker Select Buttons
- On the lower right are the speaker select buttons
- 1 = the Yamaha receiver
- Audio will play through the speakers selected on the Yamaha receiver.
- 2 = Nearfields
- Audio will play through the speakers on the computer desk
- 1 = the Yamaha receiver
Other Buttons
- Mono: press down to monitor in mono.
- Dim: pressing the button lowers the volume by 20dB
- Mute: turns the volume all the way off.
Switcher
- The video switcher selects the source for the data projector and changes the input of the Yamaha receiver.
- HDMI= CBL/SAT
- VGA = CBL/SAT
- iMac = CBL/SAT
- CCAM = CBL/SAT
- VCR= CBL/SAT
- Blu-Ray = DVD
Yamaha Receiver
Inputs
- Selecting iMac will set the Yamaha to CBL/SAT
- This is the stereo audio directly from the iMac
- Press the Multi CH input button to use the MOTU 16A via the M906
Speaker Select
- Two sets of speakers are powered by the Yamaha
- A = the small surround sound speakers
- B = the large JBL speakers
- There is a very tiny A or B letter that appears in the middle left of the Yamaha display
- Both sets can be on simultaneously.
- Only select one set.
