Difference between revisions of "COM 110"

Revision as of 10:32, 8 October 2013

Power

1. Turn ON Main Power in rack
2. Turn ON projector power with projector remote - orange bar on front of projector should turn green.

Computer

1. Connect VGA cable (taped to desk) to your computer.
2. Plug in stereo mini cable for computer sound.
3. On Projector remote - select COMPUTER
4. On Audio Mixer in the rack - select Aux 5 - bring up both the stereo and main faders.

Video (VHS, DVD)

1. Turn ON projector with projector remote.
2. In AV rack, select DVD or VHS on video switcher
3. In AV rack, on the Audio Mixer - move selector knob to AUX 1 = DVD, AUX 2 = VHS

Cassette

1. Select AUX 3
2. Bring up stereo and main fader

Plug IN stereo source

1. Use jack on front panel
2. Select AUX 4
3. Bring up stereo and main fader

External Microphone

1. Plug in microphone on front panel
2. Slowly bring up MIC fader 1!
3. Slowly bring up stereo fader!

SHUTTING DOWN

1. POWER DOWN RACK
2. TURN OFF PROJECTOR AND LEAVE PROJECTOR REMOTE ON TABLE