Difference between revisions of "Sem II 4107 Class Lab"

Revision as of 10:55, 8 May 2014

Press Display Power button on the Media Control Panel to turn on the television.
- A green light will appear in the bottom right corner of the monitor to indicate that it is on. (This may take a few seconds)
Press the input button on the Media Control Panel. This will allow you to select a source.
An Input Source menu will appear on the top right corner of the screen. Use the Input button to scroll through the menu to select your source.
For VHS/DVD select 2AV.
For Laptops select 3RGB.

If you are unable to get the TV to power on check the bottom side of the television. The is a large red button, press it and try powering on again.

Turn on the VHS/DVD deck.
Use the Remote or the buttons on the VHS/DVD deck to control viewing functions, or access menus.

No permanent VGA cable in this room. You can checkout a VGA cable from Media Loan X 6253.

Connect the VGA cable to your Laptop
- If you have a Mac you will need a mac adapter to connect to VGA cable. Adapter available from Media Loan X 6253.
If you need audio connect the Stereo Mini cable to the headphone jack on your laptop.
Turn on the laptop.
The laptop should now be projecting on the television monitor.

@@ Line 20: / Line 20: @@
 No permanent VGA cable in this room. You can checkout a VGA cable from Media Loan X 6253.
 # Connect the '''VGA''' cable to your '''Laptop'''
-#* If you have a Mac you will need a mac adapter to connect to vga cable.
+#* If you have a Mac you will need a mac adapter to connect to VGA cable. Adapter available from Media Loan X 6253.
 # If you need audio connect the '''Stereo Mini''' cable to the headphone jack on your laptop.
 # Turn on the laptop.
 # The laptop should now be projecting on the television monitor.