Difference between revisions of "Headphone Mixes-COM 111A"

Revision as of 14:36, 2 July 2014

Headphone Mixes in COM111A

There are Q 1 & 2 jacks in the 110 Orchestral Hall and a CUE 1 & 2 jack located in 111B.

CUE 1

1. Cue 1 out of your DAW is normalized into MOTU #2 Channel 15
2. MOTU #2 Channel 15 is normalized to the API Echo 1 Module
3. Turn ON the Echo 1 module on the API
4. Press the Ext. In button on the Echo 1 module on the API
5. Turn the Echo 1 pot to about 1 o'clock. This is the overall master volume level for both the API I/O echo trim pots and the cue faders in your DAW.
6. All Echo 1 sends on all API channels go to the Echo 1 module as well.
7. Use these individual Echo 1 trims to control the headphone volume of each LIVE instrument.
8. Use the Cue faders in your DAW to control the volume of your previously recorded material.

CUE 2

1. Cue 2 out of your DAW is normalized into MOTU #2 Channel 16
2. MOTU #2 Channel 16 is normalized to the API Echo 2 Module
3. Turn ON the Echo 2 module on the API
4. Press the Ext. In button on the Echo 2 module on the API
5. Turn the Echo 2 pot to about 1 o'clock. This is the overall master volume level for both the API I/O echo trim pots and the cue faders in your DAW.
6. All Echo 2 sends on all API channels go to the Echo 1 module as well.
7. Use these individual Echo 2 trims to control the headphone volume of each LIVE instrument.
8. Use the Cue faders in your DAW to control the volume of your previously recorded material.