Difference between revisions of "Library 1540"

From Help Wiki
Line 1: Line 1:
 +
===Laptop:===
 +
# From media control panel left, select your source (VCR, DVD, Doc Cam, PC (podium computer), etc). A solid light will indicate which source is active. You may need to hold the button for 2 seconds.
 +
# From the media control panel right, use the Laptop/Mac Mini switch to select whether you are using a laptop or the Mac Mini.
 +
# Securely connect the VGA cable on the podium to your computer, if you need audio connect the mini audio jack into the headphone jack, If you are using a Mac, you will need an adaptor to connect from your laptop to the VGA (available at Media Loan).
  
 +
:For the best results, wait until all of the cables are securely connected before turning on your laptop.
  
−
[[Category:Media Classrooms]]
+
===Mac Mini:===
−
===Computer (built-in)===
+
# From media control panel right, move the Laptop/Mac Mini switch to Mac Mini.
−
Turn on the projector and select “PC” on the podium. If you are using the built-in MacMini, make sure the podium “Computer” switch is set to “Built-in”. The computer should be on, so just move the mouse or press any key on the keyboard to wake it up. You must authenticate with your TESC login to use the computer, and it may take a few extra moments to start up the first time you log in. If you don’t have a TESC login, call  Media Services at x6270 for access. Always log out when you are done with the computer.  
+
# Pull out the keyboard and press any key or move the mouse to bring up TESC login on monitor.
 +
# You can insert a flashdrive into the back of the Mac Mini and a CD/DVD into the front of the Mac Mini.
  
−
===Computer (laptop)===
+
On media control panel left there is volume control.
−
Turn on the projector and select “PC” on the podium. If you are using your own laptop, make sure the podium “Computer” switch is set to “Portable”. Connect the VGA cable coming out of the podium to your computer, and if you will need to hear computer audio, plug the small audio plug into your headphone jack. An ethernet cable is also provided for internet access.
+
Important! – Make sure the audio switch on the media control panel right is switched to normal.
−
For best results, wait until everything is connected before turning on your laptop, and it should automatically appear on the large screen.
+
  
−
===Document Camera===
+
===Document Camera:===
−
Turn on the projector and select “Doc Cam” on the podium. Unfold the arms and lens of the document camera, taking care not to force them. Press the button on the document camera labeled “On/Off”. Place your document on the white surface. To temporarily freeze the image on the screen, press “Pause”, then press again to unfreeze.  
+
# From media control panel left, select ‘Doc Cam’.
 +
# Locate the power switch on the document camera and turn it on.
  
−
===DVD or CD===
+
===DVD/CD:===
−
The DVD player is located in the equipment rack, so you will need a key to open it. After turning on the projector and selecting “DVD” on the podium, put your disc in the player, and use either the podium control buttons or the remote control (in the equipment rack drawer) to navigate.  
+
# The DVD/CD player is located in the equipment rack. You will need a key to open the rack.
 +
# From media control panel left, select ‘DVD’.
 +
# Turn on the DVD player in the media rack and put your DVD/CD in the player.
 +
# On media control panel left, use the control buttons or use the remote control.
  
−
===VHS tape or TV===
+
===VHS:===
−
The VCR is located in the equipment rack, so you will need a key to open it. After turning on the projector and selecting “VCR” on the podium, put your tape in the player, and use either the podium control buttons or the remote control (in the equipment rack drawer) to control playback or change channels.  
+
# The VHS player is located in the equipment rack. You will need a key to open the rack.
 +
# From media control panel left, select ‘VCR’.
 +
# Turn on the VCR and put your VHS tape in the player.
 +
# On media control panel left, use the control buttons or use the remote control.
  
−
===DV tape===
+
===Troubleshooting:===
−
The DV deck is located in the equipment rack, so you will need a key to open it. After turning on the projector and selecting “DVCAM” on the podium, put your tape in the player, and use the remote control (in the equipment rack drawer) to control playback.
+
Is the Crown Amp turned on? (located on the top of rack)
 +
Make sure the main power to the Rane mixer is on.
 +
Is the Rane master volume turned up?
 +
Is the Yamaha receiver turned on?
 +
Is the Yamaha receiver main volume turned up?
 +
On the Rane mixer, make sure input #1 (PC), input #2 (DVD), and input #3 (VCR) are turned up.
 +
 
 +
 
 +
'''Need Help??'''
 +
 
 +
'''Call Media Patron Services at x6270'''
 +
 
 +
[[Category:Media Classrooms]]

Revision as of 10:58, 1 December 2015

Laptop:

  1. From media control panel left, select your source (VCR, DVD, Doc Cam, PC (podium computer), etc). A solid light will indicate which source is active. You may need to hold the button for 2 seconds.
  2. From the media control panel right, use the Laptop/Mac Mini switch to select whether you are using a laptop or the Mac Mini.
  3. Securely connect the VGA cable on the podium to your computer, if you need audio connect the mini audio jack into the headphone jack, If you are using a Mac, you will need an adaptor to connect from your laptop to the VGA (available at Media Loan).
For the best results, wait until all of the cables are securely connected before turning on your laptop.

Mac Mini:

  1. From media control panel right, move the Laptop/Mac Mini switch to Mac Mini.
  2. Pull out the keyboard and press any key or move the mouse to bring up TESC login on monitor.
  3. You can insert a flashdrive into the back of the Mac Mini and a CD/DVD into the front of the Mac Mini.

On media control panel left there is volume control. Important! – Make sure the audio switch on the media control panel right is switched to normal.

Document Camera:

  1. From media control panel left, select ‘Doc Cam’.
  2. Locate the power switch on the document camera and turn it on.

DVD/CD:

  1. The DVD/CD player is located in the equipment rack. You will need a key to open the rack.
  2. From media control panel left, select ‘DVD’.
  3. Turn on the DVD player in the media rack and put your DVD/CD in the player.
  4. On media control panel left, use the control buttons or use the remote control.

VHS:

  1. The VHS player is located in the equipment rack. You will need a key to open the rack.
  2. From media control panel left, select ‘VCR’.
  3. Turn on the VCR and put your VHS tape in the player.
  4. On media control panel left, use the control buttons or use the remote control.

Troubleshooting:

Is the Crown Amp turned on? (located on the top of rack)
Make sure the main power to the Rane mixer is on.
Is the Rane master volume turned up?
Is the Yamaha receiver turned on?
Is the Yamaha receiver main volume turned up?
On the Rane mixer, make sure input #1 (PC), input #2 (DVD), and input #3 (VCR) are turned up.


Need Help??

Call Media Patron Services at x6270

Retrieved from "http://helpwiki.evergreen.edu/wiki/index.php?title=Library_1540&oldid=27286"

The Evergreen State College