Difference between revisions of "3D Lab Checklist"
From Help Wiki
(→Checklist) |
(→Checklist) |
||
| Line 10: | Line 10: | ||
# Open '''Dragonframe'''. Make a '''new project''' or open an existing one. | # Open '''Dragonframe'''. Make a '''new project''' or open an existing one. | ||
# Set '''Aspect Ratio''' masks. | # Set '''Aspect Ratio''' masks. | ||
| + | # In the DMX window set up bash light and the DMX lights. | ||
| + | # Turn off overhead lights and check for reflections. | ||
# Set camera settings with '''Dragonframe''' | # Set camera settings with '''Dragonframe''' | ||
#* Focus the lens. | #* Focus the lens. | ||
#* Set exposure. | #* Set exposure. | ||
| − | |||
# Animate your sequence. | # Animate your sequence. | ||
# [[Exporting - Dragonframe|Export]] | # [[Exporting - Dragonframe|Export]] | ||
| + | # Back up files to Orca | ||
# Record your exit time in the log book as you leave. | # Record your exit time in the log book as you leave. | ||
[[Category:Animation Labs]] | [[Category:Animation Labs]] | ||
Revision as of 10:34, 20 October 2016
Checklist
Follow this checklist every time you use the lab.
Look at the 3D Lab Manual article for details on the steps below
- Sign the log book.
- Get the materials ready.
- Power on camera and lights. Make sure that the camera is set to Manual (M).
- Power on the computer.
- Open Dragonframe. Make a new project or open an existing one.
- Set Aspect Ratio masks.
- In the DMX window set up bash light and the DMX lights.
- Turn off overhead lights and check for reflections.
- Set camera settings with Dragonframe
- Focus the lens.
- Set exposure.
- Animate your sequence.
- Export
- Back up files to Orca
- Record your exit time in the log book as you leave.
