Difference between revisions of "O2R-MOTU-Digital Performer Cheat Sheet"
From Help Wiki
(→At a Glance) (Tag: VisualEditor) |
m (→At a Glance) (Tag: VisualEditor) |
||
| Line 8: | Line 8: | ||
*O2R - find '''Layer''' section and select Layer 1-24 | *O2R - find '''Layer''' section and select Layer 1-24 | ||
| − | *Trim out microphone, and use +48V On/Off switch as needed (for condenser microphones, etc.) | + | *Trim out microphone on Channel 1 of the 02R, and use +48V On/Off switch as needed (for condenser microphones, etc.) |
*Push fader up and you should see levels on the Meters | *Push fader up and you should see levels on the Meters | ||
| − | *Push up stereo fader | + | *Push up stereo fader (Main Mix fader) |
| − | *On the Control Room section select '''STEREO''' | + | *On the Control Room section, select '''STEREO''' |
*Turn up '''Control Room Level''' light grey knob to control speaker volume | *Turn up '''Control Room Level''' light grey knob to control speaker volume | ||
*Open Digital Performer and choose '''Audio Lab Template''', save to Storage drive in your folder with your name on it. | *Open Digital Performer and choose '''Audio Lab Template''', save to Storage drive in your folder with your name on it. | ||
| Line 19: | Line 19: | ||
*Use the '''Encoder''' knobs on the O2R to control headphone volume | *Use the '''Encoder''' knobs on the O2R to control headphone volume | ||
*In the '''Encoder Mode''' section select '''AUX''' | *In the '''Encoder Mode''' section select '''AUX''' | ||
| + | **Aux 7 is normed to Cue 1, Aux 8 is normed to Cue 2 | ||
*Use the Encoder knob on your '''LIVE''' channel to control volume to the headphones | *Use the Encoder knob on your '''LIVE''' channel to control volume to the headphones | ||
*Use the Encoder knob on channels 25 & 26 to control volume from Digital Performer Mix L Mix R | *Use the Encoder knob on channels 25 & 26 to control volume from Digital Performer Mix L Mix R | ||
[[Category:Audio Lab]] | [[Category:Audio Lab]] | ||
Revision as of 13:51, 18 July 2018
At a Glance
Directions for using the Yamaha 02R Console:
- Locate Scene memory > Press Display > Toggle to Scene 95 or 96 > Press Recall
- Scene 95 is for Multitrack Recording, Scene 96 is for Surround Mixing.
- Studio: Patch in microphone to Panel A, Input 1
(Mic panels in 1362 are normalized to the inputs of O2R MIC/LINE inputs)
- O2R - find Layer section and select Layer 1-24
- Trim out microphone on Channel 1 of the 02R, and use +48V On/Off switch as needed (for condenser microphones, etc.)
- Push fader up and you should see levels on the Meters
- Push up stereo fader (Main Mix fader)
- On the Control Room section, select STEREO
- Turn up Control Room Level light grey knob to control speaker volume
- Open Digital Performer and choose Audio Lab Template, save to Storage drive in your folder with your name on it.
- On Layer 25-48 of the O2R, channels 25 & 26 are the MAIN L/R OUT of Digital Performer
Headphone Mixes
- Use the Encoder knobs on the O2R to control headphone volume
- In the Encoder Mode section select AUX
- Aux 7 is normed to Cue 1, Aux 8 is normed to Cue 2
- Use the Encoder knob on your LIVE channel to control volume to the headphones
- Use the Encoder knob on channels 25 & 26 to control volume from Digital Performer Mix L Mix R
