Difference between revisions of "Library 1326"

Revision as of 11:32, 6 January 2020

LIB 1326 is located in B wing between Photo and CCAM.

Source buttons shown here may be in a different order in the classroom.

Starting

To turn ON the projector, press the display "ON" button.

The button will blink for 30 seconds while the projector warms up.

You may need to hold the button for 2 seconds.
On the AV Control Panel, press the button for your source. A solid light indicates which source is active.

HDMI Laptop

Press the HDMI button on the AV Control Panel
Plug in your laptop to the provided HDMI cable
Sound comes through the HDMI connection; when playing sound, adjust the volume knob on the AV Control Panel to a comfortable level.

If you need an adapter to connect your laptop to the podium, one can be checked out at Media Loan.

VGA Laptop

Press the VGA button on the AV Control Panel
Plug in your laptop to the provided VGA cable
Sound comes through the earphone plug on the VGA cable. Connect it to your earphone port on the laptop & make sure the device volume is up. When playing sound, adjust the volume knob on the AV Control Panel to a comfortable level.

If you need an adapter to connect your laptop to the podium, one can be checked out at Media Loan.

Mac Mini

Press the Mac Mini button on the AV Control Panel
Log in using the keyboard and mouse (if the keyboard and mouse are not on the podium top, check the keyboard tray)
Sound level should be turned up on the mac, and the volume adjusted via the AV Control Panel volume knob. When playing sound, adjust the volume knob on the AV Control Panel to a comfortable level.

Important: If there is a "Audio" switch on the right, near the laptop wires, make sure it is set to "Normal" (not "mixer")

VHS

The VHS player is in the equipment rack (which must be unlocked with a key)
Press the VHS button on the AV Control Panel
Turn on the VCR and put your VHS tape in the player.
Use the AV Control Panel buttons to operate the VCR, or the buttons on the VCR itself. A remote is also in the rack drawer, if one is available.
Closed Caption for the VCR is turned on and off by the "Close Caption" switch near the laptop wires.

Blu-ray / DVD

Updated rooms that contain a Blu-ray player have the player in the front of the the podium below the keyboard tray. (very near the top)
Rooms with only DVD players have the DVD player in the equipment rack (which must be unlocked with a key)
Press the BLU-RAY button or DVD button on the AV Control Panel
Press the eject button on the player and put your disc in the player.
Use the AV Control Panel buttons to operate the player, or use the player's remote control (in the keyboard tray,on top of the podium, or in the rack drawer).
Closed Caption can be turned on/off from the "subtitles" button on the remote, or from the menu system of your video disc.

Document Camera

Press "Doc Cam" on the AV Control Panel
Turn on the document camera either by tapping the power button (new ones), or turning on the switch (old ones).
Adjust the camera arm and head to show your document or demonstration the way you want it on the screen.
New cameras with the folding arm have a switch on the front of the camera head that sets the camera light to off/low/high light
Flatbed-type cameras have a button on the control panel to select the light mode.
Important: To turn off new Epson cameras, pressing the power button twice: the first asks for a confirmation & pressing again will turn it off.

Troubleshooting:

No picture?:

- Try pressing 'Mute All' and then pressing again to unmute

- Is data projector turned on? (try starting again, & call x6270)

- Is the cable firmly connected to the laptop (or adapter, and adapter to laptop)

No audio?:

- Is volume on AV control panel turned up enough to hear?

- Laptop: Is the volume on the laptop turned up and source selected? (HDMI button for HDMI connection, etc?)

- Is the Yamaha (or other brand) receiver turned on in the rack?

Assistive Listening Procedures

This room does not have integrated listening technology installed, but there is a microphone input jack and XLR or phono plug outputs on the panel.

These can be used to connect an extra microphone and listening equipment, or self-contained listening equipment can be used.

Please work with [Access Services] to coordinate an extended checkout of suitable listening equipment from Media Loan.

@@ Line 1: / Line 1: @@
-[[File:LIBPANEL.pdf]]
 __NOTOC__
+{{TwoColumn
+|lead=
+'''LIB 1326''' is located in B wing between Photo and CCAM.
+|content=
+{{AVclassroom_template_podium226}}
+{{AVclassroom_template_ALS-plug}}
-To turn on the projector, press the display “on” button. The button will blink for 30 seconds while the projector warms up.
-Select your source (VCR, DVD, Doc Cam, Laptop, PC (podium computer), etc).
-A solid light will indicate which source is active. You may need to hold the button for 2 seconds.
-===Laptop===
-Turn on the projector and select “Laptop” on the podium. Securely connect the VGA cable on the podium to your computer, if you need audio connect the mini audio jack into the headphone jack, If you are using a Mac, you will need an adaptor to connect from your laptop to the VGA (available at Media Loan).
-For the best results, wait until all of the cables are securely connected before turning on your laptop.
-===Podium Computer/Mac Mini===
-After you have turned on the projector and selected “PC” on the podium, move the mouse or press any key on the keyboard. You will need a key to unlock the drawer in the podium where the keyboard and mouse are. If computer is not on, the power button is located on the back of the Mac Mini. You can play DVD/CD from Mac Mini. Login using your TESC login name and password. Always log out when you are done using the computer.
-===DVD===
-After you have turned on the projector and selected “DVD” on the podium. Insert your disk into the DVD player, which is located in the drawer in podium.
-===VHS===
-After you have turned on the projector and selected “VCR” on the podium, insert your tape into the VHS deck.
-===Document Camera===
-The document camera is located on the right side of the podium. After turning on the projector, select “Doc Cam” on the podium. Unfold the arms and lens of the document camera, taking care not to force them. Turn on the document camera and place your document on the white surface. Use the function buttons on the document camera to adjust the focus, rotate the image, zoom in and out, etc.
-===Podium Mic===
-To use the podium mic, turn on the “Mic Speaker”. Adjust the volume level with the “Mic volume” knob.
-==*Troubleshooting*==
-===No Picture…===
-#	Check VGA connection to your laptop to make sure it’s fully connected.
-#	Is data projector on?
-===No Audio…===
-#	Is mini cable inserted into laptop?
-#	Is volume on laptop turned up?
-#	Is podium volume turned up?
-#	Is volume up on monitor screen (top right) turned up?
-'''Need Help??'''
-'''Call Media Patron Services at x6270'''
+|sidebar=
+{{GetAVHelp}}
+}}
 [[Category:Media Classrooms]]