Sem II 1105 Tiered Lecture

Contact Electronic Media at 360-867-6270 for support or key authorizations.

Unlock podium and touch AMX screen to start system

Podium Computer (THIS NEEDS TO BE UPDATED)

1. Touch AMX screen to start system.
2. Press COMPUTER then PODIUM COMPUTER. This starts the projector and lowers the screen.
3. Pull out keyboard and mouse drawer.
4. Open computer cabinet to make sure computer is on (power light) and to have access to CD drawer, floppy and zip drives and USB or firewire jacks.

Laptop Computer

1. Touch AMX screen to start system.
2. Press COMPUTER then LAPTOP. This will start the projector and lower the screen. Connect the VGA cord to your laptop and to the Laptop input located in the center of the podium.
3. Connect the ethernet cable to your laptop and to the ethernet jack located at the center of the podium. Wireless is also available in 1105 rooms.
4. If you do not see your laptop image then RESTART YOUR COMPUTER or check your mirroring/appearance settings in your control panel.

Video

1. Insert media (DVD,VHS) in the AV cabinet near the door.
2. Touch the AMX screen in the podium to start the system.
3. Press VIDEO then press your selection, DVD, VHS, TV. Use the menu on the AMX touch screen to control your media. You can also play your DVD through the computer.

Document Camera

1. Roll out document camera drawer on the right of the podium.
2. Turn on document camera.
3. Press the DOCUMENT CAMERA selection on the AMX touch screen. You should see your image on the monitor and projection screen.

Audio

1. Insert your media, tape or CD in the decks located in the AV cabinet.
2. Touch the AMX screen in the podium. Press AUDIO and select either CD or tape. Use AMX touchscreen menu to control your media.

Surround Sound

1. After you have selected your media source on the AMX screen then press surround sound.
2. Select what type of sound mode you want.
3. Press the BACK button on the lower left of the AMX screen.

Shutdown Procedures (UPDATE THIS)

1. Turn off Projector by pressing the Display Power button for 3 seconds.
2. Press the SCREEN UP button to raise screen.

Return equipment and LOCK all locks