DSLR Video - T2i-T1i - Intro

Notes

• The T1i has battery type (E5),  and the T2i has battery type (E8), these are not cross-compatible
  
• Whenever possible it is recommended to shoot video using the T2i camera because of the added video features over the T1i model
• Additional accessories including AC adapter cables, memory card readers, lenses, and remotes are  available separately through Media Loan

Camera Settings

1. Turn off both Auto Focus and Image Stabilizer switches on the lens
2. Turn the camera dial to the movie mode (camera icon)
3. Press the Menu button and adjust the following settings Canon Rebel Video Settings Guide
4. Press the red video record button near the viewfinder to start video recording.

Shooting Settings

Set the ISO/ASA: (film grain - light sensitivity)

• Press the ISO button and use the scroll wheel to adjust values.
• Anything above 800 will look pretty grainy.

Set White Balance:

• Take a shot of a white piece of paper in the subject area.
• In the menu settings select that white image as the custom white balance reference.
• Press Display.
• Press Quick menu.
• Select custom white balance using the scroll wheel.
• Press Quick menu to exit.

Adjust exposure:

• Press the * symbol to adjust exposure settings in combination with the AV button and scroll wheel.

Focus:

• Press the AF button to zoom and focus, or use the camera zoom and focus controls on the lens.
• Use the focus assist zoom button to toggle magnification x5, or x10 to do critical focus.

Start Recording

• Press the camera button with the red dot directly next to the viewfinder to start video recording. (Pressing the shutter will only take a still image)
• Press the camera record button again to stop.

It is recommended to have pre and post roll before and after each shot.

Related Articles

Log and Transfer - Final Cut Pro

Resources

Virtual Camera

Proficiency Guide

T1i Manual

T2i Manual

DIY Steadicam