16mm Transfer Station

From Help Wiki
Revision as of 15:58, 7 February 2014 by Krusea (Talk | contribs) (→‎Getting Ready)

Getting Ready

Power

  1. Turn on power strip
  2. Start the computer
  3. Turn on the projector (Back right)
  4. Log into computer

Cleaning

  1. Open StCamSWare from the desktop
  2. Turn projector to Still to turn on the light.
  3. Look at StCamSWare and if the image is dirty you need to clean the projector.
  4. Pull the light away from the projector and clean with canned air.
Retrieved from "http://helpwiki.evergreen.edu/wiki/index.php?title=16mm_Transfer_Station&oldid=23311"

The Evergreen State College