Sem II 1107 Workshop

Contact AV classroom support ext. 6270

Laptop

1. Tap the touch screen to start system.
2. Press HDMI or VGA. depending on what plug your laptop uses. This will start the projector
3. To lower the screen, check that no people, lecterns, or other objects are in the path of the screen, then press Screen Down (left side, second button).
4. Connect the appropriate cord to your laptop (detailed instructions are available by pressing Help on the touchscreen (on the left, third button down).
5. Wireless network connction is available in 1107 rooms, or you may connect via an ethernet cable to a plug on the wall.
6. If you do not see your laptop image then restart the computer or check your mirroring/appearance settings in your control panel.

Blu-ray or DVD

1. Tap the touch screen to start system.
2. Press BluRay. This starts the projector and selects the player.
3. To lower the screen, check that no people, lecterns, or other objects are in the path of the screen, then press Screen Down (left side, second button).
4. Insert your Disc into the Blu-ray player.
5. Play your Movie using the touch screen controls, or the remote from the top or the rack.
6. You can adjust volume on the touch screen.

VHS

1. Tap the touch screen to start system.
2. Select VCR to pick the VHS player and start the projector.
3. To lower the screen, check that no people, lecterns, or other objects are in the path of the screen, then press Screen Down (left side, second button).
4. Insert your VHS tape into the VCR deck.
5. Press play to begin, if the player does not autoplay. You can adjust the volume through the touch screen.
6. If you need captions on or off, the caption mode can be selected by pressing VCR or VCR/CC for without or with captions.

Audio

1. A CD can be played in the Blu-ray player, please see those instructions.
2. To play sound from a phone or other media player with an earphone port, plug in the audio connector on the VGA cable and press Music.
3. Use the touch screen menu to control your volume.

A/V Mute

The A/V mute allows you to black out the projector and mute audio so that you can engage in discussion or use the blackboard without the distraction of extra sound or projection coming out over the top of things and making it hard to see or hear. If the projector goes to blue instead of black, make sure the Blueray player is turned on and toggle the A/V mute off and on again.

Shutdown Procedures

1. Select Power Off on the touch screen (lower left button)
2. Confirm the shutdown action.
3. The screen should show a loading bar of the projector cooling down for a few moments.
4. Please leave the rack power turned on.

Return equipment and LOCK all locks

Assistive Listening Procedures

The 1107 rooms do not have integrated listening technology installed. The microphone input jack and phono plug outputs of the media connector panel can be used to connect an extra microphone and listening equipment, or self-contained listening equipment used. Please work with [Access Services] to coodinate an extended checkout of suitable listening equipment from Media Loan.

Troubleshooting:

No picture?:

- Does laptop have power?

- Is data projector turned on?

- Is cable fully connected to the laptop?

No audio?:

- Is room volume on touchscreen turned up?

- Laptop: Is the volume on your laptop turned up and output source correctly selected?