Export Image Sequence - Dragonframe

The image files Dragonframe saves to your project folder as you capture are neither cropped nor rotated. To produce a sequence of images that look just like your animation frames should, you'll have to export them as an image sequence.

Export Menu

1. Select File > Export Image Sequence
2. Export Image Sequence window will open

Source

The source setting need to be set.

1. Set Source to High-resolution JPG/TIFF
2. Set Exposure to X1
3. Select all frames to export the entire project
   • Select Range: to export specific frames

Transformation

In the Transformation section adjust the crop aspect ratio to match your project settings.

1. Check Crop to aspect ratio and set to 16:9 or 4x3 based on what you shot at.
2. Uncheck Use push-in mask.
3. Check Rotate/mirror to match animation window
4. If you need full resolution images, leave the scale at 100%
5. If you need to resize the images, then set the Scale section as below:
   • px = 4:3 = 1280 x 960
   • px = 16:9 = 1920 x 1080
6. Check Keep proportions

Output

1. Format: TIFF
2. Quality: Leave at 100
3. File Name: Defaults to scene name, can change if needed
   • Leave exposure and digits at the default settings
   • Leave Create separate folders for each exposure checked
4. Destination: Select folder to export images to